EMC Components SMT Inductors SIMID 0603 B82496-A Data Book Supplement Vakatseite (( 2 )) SMT Inductors SIMID 0603 B82496- A Size 0603/1608 (inch/mm)) Rated inductance 1,0 to 220 nH Rated current 0,07 to 0,5 A Construction ● Copper plated ceramic core ● Laser cutted ● Laquer coated Features ● Extended induction range ● High resonance frequency ● Suitable for reflow (IR and vapor phase) and wave soldering ● Same measuring frequencies for L and Q Applications ● Filtering of supply voltages, coupling, decoupling ● Antenna amplifiers ● Video cameras ● Mobile phones Terminals ● Tin coated over nickel barrier plating ● No leaching during wave soldering Marking Minimum marking on reel: Manufacturer, part number, ordering code, L value and tolerance of L value, quantity, date of packing Delivery mode 8- mm blister or cardboard tape wound on 178- mm ∅ reel Siemens Matsushita Components 11.98 3 SMT Inductors SIMID 0603 B82496- A Dimensional drawing 0,8±0,15 Size 0603/1608 (inch/mm), approx. weight 4 mg 0,3±0,2 0,3±0,2 0,8±0,15 1,6±0,15 SSB1338-L c PCB Layoutempfehlung layout recommendation a b SSB1356-J Dimensions (mm) a 0,8...1,0 4 b c 2,0...2,6 0,7...0,9 11.98 Siemens Matsushita Components SMT Inductors SIMID 0603 B82496- A Characteristics and ordering codes For further technical data see page 7. LR nH 1,0 1,2 1,5 1,8 2,2 2,7 3,3 3,9 4,7 5,6 6,8 8,2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 Tolerance1) ± 0,3 nH =ˆ A Qmin 7 7 8 8 8 8 9 ±5% =ˆ J 9 9 9 9 9 10 10 10 10 10 10 10 11 11 12 12 12 12 5 5 4 4 f L; f Q MHz 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 25,2 25,2 25,2 25,2 IR mA 500 500 500 500 500 500 500 450 450 430 430 400 400 400 350 350 300 300 300 300 250 250 250 250 200 130 100 80 70 Rmax Ω 0,05 0,06 0,07 0,08 0,09 0,10 0,12 0,15 0,17 0,18 0,20 0,28 0,32 0,35 0,41 0,45 0,50 0,55 0,60 0,80 0,95 1,2 1,3 1,5 1,8 3,0 4,5 6,5 7,5 fres, min MHz 6000 6000 6000 6000 6000 6000 5500 5500 4800 4600 3550 3500 2800 2800 2500 2300 2000 2000 1800 1800 1800 1800 1500 1500 1300 1200 1100 1000 900 Ordering code2) B82496- A3109- A B82496- A3129- A B82496- A3159- A B82496- A3189- A B82496- A3229- A B82496- A3279- A B82496- A3339- A B82496- A3399- J B82496- A3479- J B82496- A3569- J B82496- A3689- J B82496- A3829- J B82496- A3100- J B82496- A3120- J B82496- A3150- J B82496- A3180- J B82496- A3220- J B82496- A3270- J B82496- A3330- J B82496- A3390- J B82496- A3470- J B82496- A3560- J B82496- A3680- J B82496- A3820- J B82496- A3101- J B82496- A3121- J B82496- A3151- J B82496- A3181- J B82496- A3221- J 1) Closer tolerances upon request 2) Ordering code for blister tape. For cardboard tape append the code number "020", E. g.: B82496- A3109- A020 Siemens Matsushita Components 11.98 5 SMT Inductors SIMID 0603 B82496- A Taping 1,75±0,1 4±0,1 _0 1,5 +0,1 2±0,05 1,8±0,2 0,25 8±0,3 A 3,5±0,05 Schnitt A-A Section A-A 1±0,2 A 1,3 max. 4±0,1 Abspulrichtung Direction of unreeling SSB1344-V Packing 2±0,5 60±0,5 ø13±0,5 21±0,8 W A A = 178 ± 2 mm W = 9 ± 0,3 mm SSB1341-6 Packing unit: 3000 pcs. per reel 6 11.98 Siemens Matsushita Components SMT Inductors SIMID 0603 B82496- A General technical data Rated inductance L R Measured at frequency fL, with RF LCR meter HP 4286A and test fixture HP 16193A Q factor Qmin Measured at frequency fQ, with RF LCR meter HP 4286A and test fixture HP 16193A Rated current IR Maximum permissible dc with an inductance decrease of ∆ L /L 0 ≤ 10 % and/or temperature increase of ≤ 20 K at rated temperature TR = 85°C Self resonance frequency fres, min Measured with network analyzer HP 8753D DC resistance R max Measured at 20°C ambient temperature, measuring current < IR Climatic category In accordance with IEC 68- 1 40/085/56 (– 40°C/+ 85°C/56 days damp heat test) Soldering According to CECC 00802 Wave soldering Maximum 260 °C, 5 s Infrared soldering Maximum 250 °C, 5 s temperature/time profile >215 °C, max. 60 s Vapour- phase soldering Maximum (215 ± 5)°C, 20 to 60 s Solderability (230 ± 5)°C, (3 ± 0,5) s Wetting of soldering area: ≥ 90 % Resistance to soldering heat (260 ± 5)°C, (10 ± 0,5) s after 5 min preheating at (120 ± 10)°C |∆L/L| ≤ 5 %, |∆Q/Q| ≤ 20 % Permissible PCB bending 2 mm (100 mm long standard PCB) Siemens Matsushita Components 11.98 7 SMT Inductors SIMID 0603 B82496- A Published by Siemens Matsushita Components GmbH & Co. KG Marketing Kommunikation, Postfach 80 17 09, D- 81617 München Siemens Matsushita Components 1998. All Rights Reserved. As far as patents or other rights of third parties are concerned, liability is only assumed for components per se, not for applications, processes and circuits implemented within components or assemblies. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of Siemens AG, Passive Components and Electron Tubes Group, in the Federal Republic of Germany or the international Siemens Companies and Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. 8 11.98 Siemens Matsushita Components