EPCOS B84143A0036R105

EMC filters
3-line filters
for converters and power electronics
Rated current 8 to 150 A
Series/Type:
B84143A*R105
Date:
January 2006
 EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet and the
information contained therein without EPCOS’ prior express consent is prohibited.
3-line filters
B84143A*R105
for converters and power electronics
Power line filters for 3-phase systems
Rated voltage 520/300 V AC, 50/60 Hz
Rated current 8 to 150 A
Construction
■ 3-line filter
■ Metal case
■ Book size
Features
■
■
■
■
■
Excellent price/performance ratio
Ultra-compact design
Low weight
Easy to install
Optimized for long motor cables and operation
under full load
■ ENEC10, UL and cUL approval
Applications
■ Frequency converters for motor drives, e.g.
– elevators
– pumps
– traction systems
– HVAC systems (heating, ventilation and air conditioning)
■ Power supplies
Terminals
■ Finger-safe terminal blocks
Marking
Marking on component:
Manufacturer’s logo, ordering code,
rated voltage, rated current, rated temperature,
climatic category, date code
Minimum marking on packaging:
Manufacturer’s logo, ordering code
Please read Cautions and warnings and
Important notes at the end of this document.
2
01/06
3-line filters
B84143A*R105
for converters and power electronics
Typical circuit diagram
LINE
LOAD
L1
L1’
L2
L2’
L3
L3’
SSB1965-K
Technical data and measuring conditions
Rated voltage VR
520/300 V AC, 50/60 Hz
Rated current IR
Referred to 40 °C ambient temperature
Test voltage Vtest
2236 V DC, 2 s (line/line)
2720 V DC, 2 s (lines/case)
Overload capability (thermal)
1.5 · IR for 3 min per hour or
2.5 · IR for 30 s per hour
Leakage current Ileak
At 520 V AC, 50 Hz
Climatic category (IEC 60068-1)
25/100/21 (–25 °C/+100 °C/21 days damp heat test)
Approvals
EN 133200, UL 1283, CSA C22.2 No.8
Please read Cautions and warnings and
Important notes at the end of this document.
3
01/06
3-line filters
B84143A*R105
for converters and power electronics
Characteristics and ordering codes
VR
AC
V
520/300
Ileak
Terminal
cross section
mA
mm2
IR
A
mΩ
Approx. Ordering code
weight
kg
Rtyp
Approvals
8
4
13
16
0.58
B84143A0008R105 ×
×
×
16
4
15
9
0.90
B84143A0016R105 ×
×
×
25
4
15
5
1.10
B84143A0025R105 ×
×
×
36
10
15
4
1.75
B84143A0036R105 ×
×
×
50
10
15
2
1.75
B84143A0050R105 ×
×
×
66
16
16
1.5
2.7
B84143A0066R105 ×
×
×
90
35
18
1.1
4.2
B84143A0090R105 ×
×
×
120
35
18
0.90
4.9
B84143A0120R105 ×
×
×
150
50
18
0.55
5.3
B84143A0150R105 ×
×
×
× = approval granted
Please read Cautions and warnings and
Important notes at the end of this document.
4
01/06
3-line filters
B84143A*R105
for converters and power electronics
Dimensional drawings
B84143A0008R105 (8 A)
8
133.7
51.4
38±0.3
4.5
1.5
50
63
PE M4 x 11
L1
L2
L3
Marking
LINE
LOAD
L1’
L2’
L3’
Terminal blocks 4 mm 2
Tightening torque 0.5 ... 0.6 Nm
155±0.5
165
SSB2151-6-E
B84143A0016R105 (16 A)
9
199.5
46.4
38±0.3
60
4.5
1.5
70
PE M5 x 15
L1
L2
L3
Marking
LINE
LOAD
221±0.5
231
L1’
L2’
L3’
Terminal blocks 4 mm 2
Tightening torque 0.5 ... 0.6 Nm
SSB2152-E-E
Please read Cautions and warnings and
Important notes at the end of this document.
5
01/06
3-line filters
B84143A*R105
for converters and power electronics
B84143A0025R105 (25 A)
9
199.5
46.4
38±0.3
4.5
1.5
60
83
PE M5 x 15
L1
L2
L3
Marking
LINE
LOAD
L1’
L2’
L3’
Terminal blocks 4 mm 2
Tightening torque 0.5 ... 0.6 Nm
221±0.5
231
SSB2153-M-E
B84143A0036R105, B84143A0050R105 (36 and 50 A)
200
8
58
35±0.3
70
4.5
1.5
90
PE M6 x 24
L1
L2
L3
Marking
LINE
LOAD
L1’
L2’
L3’
Terminal blocks 10 mm 2
Tightening torque 1.2 ... 1.5 Nm
255±0.5
265
Please read Cautions and warnings and
Important notes at the end of this document.
SSB2154-V-E
6
01/06
3-line filters
B84143A*R105
for converters and power electronics
B84143A0066R105 (66 A)
8
200
58
35±0.3
120
4.5
1.5
141.5
PE M6 x 24
L1
L2
L3
Marking
LINE
LOAD
L1’
L2’
L3’
Terminal blocks 16 mm 2
Tightening torque 1.5 ... 1.8 Nm
255±0.5
265
SSB2155-4-E
B84143A0090R105 (90 A)
240
80
13
63
1.5
PE M10 x 34
100
135
25
6.5
L1
L2
L3
Marking
LINE
LOAD
L1’
L2’
L3’
60±0.3
46
Terminal blocks 35 mm 2
Tightening torque 3.2 ... 3.7 Nm
255±0.5
290
Please read Cautions and warnings and
Important notes at the end of this document.
SSB2156-C-E
7
01/06
3-line filters
B84143A*R105
for converters and power electronics
B84143A0120R105 (120 A)
240
90
13
1.5
PE M10 x 34
63
100
150
25
46
L1’
L2’
L3’
Marking
LINE
LOAD
65±0.3
6.5
L1
L2
L3
Terminal blocks 35 mm 2
Tightening torque 3.2 ... 3.7 Nm
255±0.5
290
SSB2157-K-E
B84143A0150R105 (150 A)
326
240
PE M10 x 34
L2
L3
L1’
Marking
LINE
LOAD
L2’
L3’
6.5
L1
65±0.3
1.5
60
86
150
54
90
70.8
255±0.5
270
Terminal blocks 50 mm 2
Tightening torque 6 ... 8 Nm
Please read Cautions and warnings and
Important notes at the end of this document.
SSB2158-T-E
8
01/06
3-line filters
B84143A*R105
for converters and power electronics
Insertion loss (typical values at Z = 50 Ω)
unsymmetrical, adjacent branches terminated
common mode, all branches in parallel (asymmetrical)
differential mode (symmetrical)
Filters for 8 A
Filters for 16 A
SSB2137-6
100
dB
SSB2138-E
100
dB
B84143A0008R105
α
α
80
80
60
60
40
40
20
20
0 4
10
10
5
10
6
10
7
Hz 10
f
B84143A0016R105
0 4
10 5
10 6
10
8
Filters for 25 A
10 7
Hz 10 8
f
Filters for 36 A
100
dB B84143A0025R105
SSB2139-M
α
100
dB B84143A0036R105
SSB2140-Q
α
80
80
60
60
40
40
20
20
0 4
10
10 5
10 6
10 7
0 4
10
Hz 10 8
f
Please read Cautions and warnings and
Important notes at the end of this document.
9
01/06
10 5
10 6
10 7
Hz 10 8
f
3-line filters
B84143A*R105
for converters and power electronics
Insertion loss (typical values at Z = 50 Ω)
unsymmetrical, adjacent branches terminated
common mode, all branches in parallel (asymmetrical)
differential mode (symmetrical)
Filters for 50 A
Filters for 66 A
100
dB B84143A0050R105
SSB2141-Y
α
α
80
80
60
60
40
40
20
20
0 4
10
10 5
10 6
10 7
Filters for 90 A
α
0 4
10
Hz 10 8
f
B84143A0090R105
α
80
60
60
40
40
20
20
10 5
10 6
10 7 Hz 10 8
f
10 6
0 4
10
10 7 Hz 10 8
f
Please read Cautions and warnings and
Important notes at the end of this document.
10
SSB2029-9
100
dB
80
0 4
10
10 5
Filters for 120 A
SSB2028-1
100
dB
SSB2027-S
100
dB B84143A0066R105
01/06
B84143A0120R105
10 5
10 6
10 7 Hz 10 8
f
3-line filters
B84143A*R105
for converters and power electronics
Insertion loss (typical values at Z = 50 Ω)
unsymmetrical, adjacent branches terminated
common mode, all branches in parallel (asymmetrical)
differential mode (symmetrical)
Filters for 150 A
α
SSB2030-C
100
dB
B84143A0150R105
80
60
40
20
0 4
10
10 5
10 6
10 7 Hz 10 8
f
Please read Cautions and warnings and
Important notes at the end of this document.
11
01/06
EMC filters
Cautions and warnings
Important information
Please read all safety and warning notes carefully before installing the EMC filter and putting it into
operation (see
). The same applies to the warning signs on the filter. Please ensure that the signs
are not removed nor their legibility impaired by external influences.
Death, serious bodily injury and substantial material damage to equipment may occur if the appro­
priate safety measures are not carried out or the warnings in the text are not observed.
Using according to the terms
The EMC filters may be used only for their intended application within the specified values in low­
voltage networks in compliance with the instructions given in the data sheets and the data book.
The conditions at the place of application must comply with all specifications for the filter used.
Warnings
■ It shall be ensured that only qualified persons (electricity specialists) are engaged on work such
■
■
■
■
as planning, assembly, installation, operation, repair and maintenance. They must be provided
with the corresponding documentation.
Danger of electric shock. EMC filters contain components that store an electric charge. Danger­
ous voltages can continue to exist at the filter terminals for longer than five minutes even after
the power has been switched off.
The protective earth connections shall be the first to be made when the EMC filter is installed and
the last to be disconnected. Depending on the magnitude of the leakage currents, the particular
specifications for making the protective-earth connection must be observed.
Impermissible overloading of the EMC filter, such as impermissible voltages at higher frequen­
cies that may cause resonances etc. can lead to destruction of the filter housing.
EMC filters must be protected in the application against impermissible exceeding of the rated
currents by suitable overcurrent protective.
12
01/06
EMC filters
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As
a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic components
or failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in which
the malfunction or failure of a passive electronic component could endanger human life or health
(e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of
suitable design of the customer application or other action taken by the customer (e.g.
installation of protective circuitry or redundancy) that no injury or damage is sustained by third
parties in the event of malfunction or failure of a passive electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as “hazardous”). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products.
Consequently, we cannot guarantee that all products named in this publication will always be
available.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, EPCOS-Jones, Baoke, CeraDiode, CSSP, MLSC, PhaseCap,
PhaseMod, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, UltraCap, WindCap are
trademarks registered or pending in Europe and in other countries. Further information will be
found on the Internet at www.epcos.com/trademarks.
13
01/06