SAW Components SAW CELL / GPS / PCS Triplexer Series/type: Ordering code: B9101 B39162B9101L310 Date: Version: April 09, 2008 2.0 EPCOS AG 2008. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. SAW Components B9101 859.0 / 1575.42 / 1920.0 MHz SAW CELL / GPS / PCS Triplexer Preliminary Data Application ■ Low loss LTCC Triplexer for mobile phones covering Cellular, GPS and PCS band ■ Usable passbands 70 MHz (CELL), 2 MHz (GPS), 140 MHz (PCS) ■ Very low insertion attenuation in CELL, GPS and PCS band ■ Very low amplitude ripple in all bands ■ Integrated low loss GPS filter with single ended out- put 50 Ω ■ No switches and control lines required ■ Shunt inductor from ANT pin to ground used for ESD protection and matching Features 0.1 5 6 0.1 4 bottom view 2 1 1.34 3 0.5 side view 2.0 Package size 2.5 x 2.0 x 1.34 mm3 Package code DCT6F RoHS compatible Approximate weight 0.018 g Package for Surface Mount Technology (SMT) Ni, gold-plated terminals Electrostatic Sensitive Device (ESD) 0.5 ■ ■ ■ ■ ■ ■ ■ top view 2.5 Pin configuration ■ ■ ■ ■ ■ 1 3 4 6 2,5 GPS Output ANT Input PCS Output CELL Output Ground Please read cautions and warnings and important notes at the end of this document. 2 April 09, 2008 SAW Components B9101 859.0 / 1575.42 / 1920.0 MHz SAW CELL / GPS / PCS Triplexer Preliminary Data Characteristics Temperature range for specification: Terminating source impedance: Terminating load impedance: T = –30 ˚C to +85 ˚C ZS = 50 Ω || 6.8 nH (ANT) ZL = 50 Ω (CELL, GPS + 1.0 nH or || 20nH, PCS) ANT - CELL Center frequency Maximum insertion attenuation 824.0 ... 894.0 MHz VSWR 824.0 ... 894.0 MHz ANT - PCS Center frequency Maximum insertion attenuation 1850.0 ... 1990.0 MHz VSWR 1850.0 ... 1990.0 MHz ANT - GPS Center frequency Maximum insertion attenuation 1574.42 ... 1576.42 VSWR 1574.42 ... 1576.42 Attenuation 0.0 ... 1000.0 1000.0 ... 1495.0 1495.0 ... 1515.0 1610.0 ... 1625.0 1635.0 ... 1655.0 1710.0 ... 1980.0 1980.0 ... 2170.0 2170.0 ... 2500.0 2500.0 ... 4000.0 4000.0 ... 6000.0 fC αmax fC αmax fC αmax MHz MHz min. B9101 typ. @ 25 ˚C max. –– 859.0 –– MHz –– –– 0.65 1.3 0.9 1.6 dB –– 1920.0 –– MHz –– –– 0.65 1.25 0.9 1.6 dB –– 1575.42 –– MHz –– –– 1.35 1.4 1.8 1.8 dB 36 32 25 10 25 32 30 23 14 11 44 38 37 25 39 41 35 28 18 15 –– –– –– –– –– –– –– –– –– –– dB dB dB dB dB dB dB dB dB dB 12 42 35 47 –– –– dB dB 12 40 22 47 –– –– dB dB α MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz CELL - GPS Attenuation α 1574.42 ... 1576.42 MHz 824.0 ... 849.0 MHz PCS - GPS Attenuation α 1574.42 ... 1576.42 MHz 1850.0 ... 1910.0 MHz Please read cautions and warnings and important notes at the end of this document. 3 April 09, 2008 SAW Components B9101 859.0 / 1575.42 / 1920.0 MHz SAW CELL / GPS / PCS Triplexer Preliminary Data Characteristics Temperature range for specification: Terminating source impedance: Terminating load impedance: T = –30 ˚C to +85 ˚C ZS = 50 Ω || 6.8 nH (ANT) ZL = 50 Ω (CELL, GPS, PCS) ANT - CELL Center frequency Maximum insertion attenuation 824.0 ... 894.0 MHz VSWR 824.0 ... 894.0 MHz ANT - PCS Center frequency Maximum insertion attenuation 1850.0 ... 1990.0 MHz VSWR 1850.0 ... 1990.0 MHz ANT - GPS Center frequency Maximum insertion attenuation 1574.42 ... 1576.42 VSWR 1574.42 ... 1576.42 Attenuation 0.0 ... 1000.0 1000.0 ... 1495.0 1495.0 ... 1515.0 1610.0 ... 1625.0 1635.0 ... 1655.0 1710.0 ... 1980.0 1980.0 ... 2170.0 2170.0 ... 2500.0 2500.0 ... 4000.0 4000.0 ... 6000.0 fC αmax fC αmax fC αmax MHz MHz min. B9101 typ. @ 25 ˚C max. –– 859.0 –– MHz –– –– 0.65 1.3 0.9 1.6 dB –– 1920.0 –– MHz –– –– 0.65 1.25 0.9 1.6 dB –– 1575.42 –– MHz –– –– 1.4 1.4 2.0 2.0 dB 36 32 25 10 25 32 30 23 14 11 44 38 37 25 39 41 35 28 18 15 –– –– –– –– –– –– –– –– –– –– dB dB dB dB dB dB dB dB dB dB 12 42 35 47 –– –– dB dB 12 40 22 47 –– –– dB dB α MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz CELL - GPS Attenuation α 1574.42 ... 1576.42 MHz 824.0 ... 849.0 MHz PCS - GPS Attenuation α 1574.42 ... 1576.42 MHz 1850.0 ... 1910.0 MHz Please read cautions and warnings and important notes at the end of this document. 4 April 09, 2008 SAW Components B9101 859.0 / 1575.42 / 1920.0 MHz SAW CELL / GPS / PCS Triplexer Preliminary Data Maximum ratings Operable temperature range Storage temperature range DC voltage ESD voltage Input power at CELL port 824 ... 849 MHz PCS port 1850 ... 1910 MHz 1) T Tstg VDC VESD –30/+85 –40/+85 5 501) ˚C ˚C V V at GPS port machine model, 10 pulses effective power in the on-state continuous wave signal PIN 31 dBm PIN 31 dBm acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses. Please read cautions and warnings and important notes at the end of this document. 5 April 09, 2008 SAW Components B9101 859.0 / 1575.42 / 1920.0 MHz SAW CELL / GPS / PCS Triplexer Preliminary Data ANT - CELL (transfer function, including PCB loss): ANT - PCS (transfer function, including PCB loss): Please read cautions and warnings and important notes at the end of this document. 6 April 09, 2008 SAW Components B9101 859.0 / 1575.42 / 1920.0 MHz SAW CELL / GPS / PCS Triplexer Preliminary Data ANT - GPS (transfer function, including PCB loss): CELL - GPS (transfer function, including PCB loss): Please read cautions and warnings and important notes at the end of this document. 7 April 09, 2008 SAW Components B9101 859.0 / 1575.42 / 1920.0 MHz SAW CELL / GPS / PCS Triplexer Preliminary Data PCS - GPS (transfer function, including PCB loss): Please read cautions and warnings and important notes at the end of this document. 8 April 09, 2008 SAW Components B9101 859.0 / 1575.42 / 1920.0 MHz SAW CELL / GPS / PCS Triplexer Preliminary Data Smith charts / VSWR S11 GPS S22 ANT Please read cautions and warnings and important notes at the end of this document. 9 April 09, 2008 SAW Components B9101 859.0 / 1575.42 / 1920.0 MHz SAW CELL / GPS / PCS Triplexer Preliminary Data Smith charts / VSWR S33 PCS S44 CELL Please read cautions and warnings and important notes at the end of this document. 10 April 09, 2008 SAW Components B9101 859.0 / 1575.42 / 1920.0 MHz SAW CELL / GPS / PCS Triplexer Preliminary Data References Type B9101 Ordering code B39162B9101L310 Marking and package C61157-A3-A35 Packaging F61074-V8225-Z000 Date codes L_1126 S-parameters (6.8 nH || ANT) B9101_NB.s4p Soldering profile S_6001 RoHS compatible defined as compatible with the following documents: "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." Moldability Before using in overmolding environment, please contact your EPCOS sales office. For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Surface Acoustic Wave Components Division P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2008. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 11 April 09, 2008 Important notes The following applies to all products named in this publication: 1. 2. 3. 4. 5. 6. 7. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as “hazardous”). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, DSSP, MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks regis- 12 April 09, 2008