EPCOS B9312 Saw tx 2in1 filter 836.5 / 1880.0 mhz Datasheet

SAW Components
SAW Tx 2in1 Filter
WCDMA band V / WCDMA band II
Series/type:
Ordering code:
B9312
B39192B9312N410
Date:
Version:
May 31, 2006
2.0
 EPCOS AG 2005. Reproduction, publication and dissemination of this data sheet, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SAW Components
B9312
SAW Tx 2in1 Filter
836.5 / 1880.0 MHz
Data Sheet
Application
■ Low-loss RF filter for mobile telephone
WCDMA band V / band II systems,
transmit path (Tx)
■ Usable passband:
Filter 1 (band V):
25 MHz
Filter 2 (band II):
60 MHz
■ Impedance transformation from:
Filter 1 (band V): 100 Ω to 50 Ω
Filter 2 (band II): 100 Ω to 50 Ω
■ Balanced to unbalanced operation
Features
0,65
0,50
2
3
4
0,075
10
5
9
8
7
0,27
0,26
0,325
1
bottom view
0,68
0,26
side view
1,6
Package size 2.0 x1.6 x 0.68 mm3
Package code QCS10I
RoHS compatible
Approximate weight 0.008 g
Package for Surface Mount Technology
(SMT)
■ Ni, gold-plated terminals
■ Electrostatic Sensitive Device (ESD)
■
■
■
■
■
top view
6
0,075
2,0
Pin configuration
■
■
■
■
■
1
4
6,7
8,9
2,3,5,10
Output [ Filter 1: band V ]
Output [ Filter 2: band II ]
Input balanced [ Filter 2: band II ]
Input balanced [ Filter 1: band V ]
Case ground
9
1
8
7
6
4
2,3,5,10
Please read cautions and warnings and
important notes at the end of this document.
2
May 31, 2006
SAW Components
B9312
SAW Tx 2in1 Filter
836.5 / 1880.0 MHz
Data Sheet
Characteristics filter 1 (WCDMA band V)
Temperature range for specification:
Terminating source impedance:
Terminating load impedance:
T = –15 ˚C to +80 ˚C
ZS = 100 Ω (balanced)
ZL =
50 Ω (unbalanced)
min.
Center frequency
fC
max.
—
typ.
@ 25 ˚C
836.5
—
MHz
—
1.6
2.2
dB
dB
αmax
Maximum insertion attenuation
824.0 ... 849.0
MHz
Amplitude ripple (p-p)
824.0 ...
849.0
MHz
—
0.7
1.5
∆α
Input VSWR
824.0
...
849.0
MHz
—
1.7
2.0
824.0
...
849.0
MHz
—
1.7
2.0
–1.0
–0.6/0.7
1.0
dB
–10.0
–2/+1
10.0
˚
23.0
28.0
—
dB
35.0
25.0
33.0
43.0
35.0
25.0
42.0
31.0
36.0
48.0
43.0
34.0
—
—
—
—
—
—
dB
dB
dB
dB
dB
dB
Output VSWR
Input amplitude balance (|S31/S21|)
824.0 ... 849.0 MHz
Input phase balance (φ(S31) – φ(S21)+180˚)
824.0
...
849.0
MHz
Common mode suppression
824.0 ... 849.0
MHz
Scs21
α
Attenuation
0.0
779.0
869.0
1570.0
1580.0
2547.0
...
...
...
...
...
...
779.0
804.0
1570.0
1580.0
2547.0
6000.0
MHz
MHz
MHz
MHz
MHz
MHz
Please read cautions and warnings and
important notes at the end of this document.
3
May 31, 2006
SAW Components
B9312
SAW Tx 2in1 Filter
836.5 / 1880.0 MHz
Data Sheet
Maximum ratings
Operable temperature range
Storage temperature range
DC voltage
ESD voltage
Input power at
WCDMA band V
T
Tstg
VDC
VESD
PIN
–30/+85
–40/+85
5
1001)
10
˚C
˚C
V
V
dBm
machine model, 10 pulses
continuous wave
@ +55˚C ambient
Tx band
1)
acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses.
Please read cautions and warnings and
important notes at the end of this document.
4
May 31, 2006
SAW Components
B9312
SAW Tx 2in1 Filter
836.5 / 1880.0 MHz
Data Sheet
Transfer function filter 1 (WCDMA band V)
Transfer function filter 1 (WCDMA band V) - wideband
Please read cautions and warnings and
important notes at the end of this document.
5
May 31, 2006
SAW Components
B9312
SAW Tx 2in1 Filter
836.5 / 1880.0 MHz
Data Sheet
Smith charts filter 1 (WCDMA band V)
S11 function
S22 function
Please read cautions and warnings and
important notes at the end of this document.
6
May 31, 2006
SAW Components
B9312
SAW Tx 2in1 Filter
836.5 / 1880.0 MHz
Data Sheet
Characteristics filter 2 (WCDMA band II)
Temperature range for specification:
Terminating source impedance:
Terminating load impedance:
T = –15 ˚C to +80 ˚C
ZS = 100 Ω (balanced) || 18nH
ZL =
50 Ω (unbalanced)
min.
Center frequency
fC
max.
—
typ.
@ 25 ˚C
1880.0
—
MHz
—
2.4
3.8
dB
dB
αmax
Maximum insertion attenuation
1850.0 ... 1910.0
MHz
Amplitude ripple (p-p)
1850.0 ... 1910.0
MHz
—
1.0
2.4
∆α
Input VSWR
1850.6
... 1909.4
MHz
—
1.8
2.3
Output VSWR
1850.6
... 1909.4
MHz
—
1.8
2.3
–1.1
–0.7/0.7
1.1
dB
–10.0
–3/+3
10.0
˚
23.0
29.0
—
dB
45.0
30.0
18.0
33.01)
30.0
30.0
54.0
42.0
36.0
35.7
35.5
40.0
—
—
—
—
—
—
dB
dB
dB
dB
dB
dB
Input amplitude balance (|S31/S21|)
1850.0 ... 1910.0 MHz
Input phase balance (φ(S31) – φ(S21)+180˚)
1850.0
... 1910.0
MHz
Common mode suppression
1850.0 ... 1910.0
MHz
Scs21
α
Attenuation
0.0
1580.0
1770.0
1930.6
1990.0
2500.0
1)
...
...
...
...
...
...
1580.0
1770.0
1830.0
1990.0
2500.0
6000.0
MHz
MHz
MHz
MHz
MHz
MHz
Attenuation of WCDMA signal determined by
∞
∫∞ Sds 21 ( f )HRRC ( f – f C )
2
df
with fC ranging from 1932.4 MHz (lowest Rx channel) to 1987.6 MHz (highest Rx channel).
HRRC(f) is the transfer function of the root-raised cosine transmit pulse shaping filter according
to 3GPP TS 25.101 with the following normalization:
∞
∫∞ HRRC ( f )
Please read cautions and warnings and
important notes at the end of this document.
2
df = 1
7
May 31, 2006
SAW Components
B9312
SAW Tx 2in1 Filter
836.5 / 1880.0 MHz
Data Sheet
Maximum ratings
Operable temperature range
Storage temperature range
DC voltage
ESD voltage
Input power at
WCDMA band II
T
Tstg
VDC
VESD
PIN
–30/+85
–40/+85
5
501)
10
˚C
˚C
V
V
dBm
machine model, 10 pulses
continuous wave
@ +55˚C ambient
Tx band
1)
acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses.
Please read cautions and warnings and
important notes at the end of this document.
8
May 31, 2006
SAW Components
B9312
SAW Tx 2in1 Filter
836.5 / 1880.0 MHz
Data Sheet
Transfer function filter 2 (WCDMA band II)
Transfer function filter 2 (WCDMA band II) - wideband
Please read cautions and warnings and
important notes at the end of this document.
9
May 31, 2006
SAW Components
B9312
SAW Tx 2in1 Filter
836.5 / 1880.0 MHz
Data Sheet
Smith charts filter 2 (WCDMA band II)
S11 function
S22 function
Please read cautions and warnings and
important notes at the end of this document.
10
May 31, 2006
SAW Components
B9312
SAW Tx 2in1 Filter
836.5 / 1880.0 MHz
Data Sheet
References
Type
B9312
Ordering code
B39192B9312N410
Marking and package
C61157-A7-A146
Packaging
F61074-V8152-Z000
Date codes
L_1126
S-parameters
LN55D_band5_NB.s3p, LN55D_band5_WB.s3p
LN55D_band2_NB.s3p, LN55D_band2_WB.s3p
Soldering profile
S_6001
RoHS compatible
defined as compatible with the following documents:
"DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT
AND OF THE COUNCIL of 27 January 2003 on the restriction
of the use of certain hazardous substances in electrical and
electronic equipment. 2005/618/EC from April 18th, 2005,
amending Directive 2002/95/EC of the European Parliament
and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in
electrical and electronic equipment."
Moldability
Before using in overmolding environment, please contact your
EPCOS sales office.
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Surface Acoustic Wave Components Division
P.O. Box 80 17 09, 81617 Munich, GERMANY
 EPCOS AG 2006. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
11
May 31, 2006
Important notes
The following applies to all products named in this publication:
1.
2.
3.
4.
5.
6.
7.
Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties
described in the product specification is suitable for use in a particular customer application.
We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled
out in the current state of the art, even if they are operated as specified. In customer
applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger
human life or health (e.g. in accident prevention or life-saving systems), it must therefore be
ensured by means of suitable design of the customer application or other action taken by the
customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is
sustained by third parties in the event of malfunction or failure of a passive electronic component.
The warnings, cautions and product-specific notes must be observed.
In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as “hazardous”). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available.
Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
The trade names EPCOS, CeraDiode, CSSP, PhaseCap, PhaseMod, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap are trademarks registered
or pending in Europe and in other countries. Further information will be found on the Internet
at www.epcos.com/trademarks.
12
May 31, 2006
Similar pages