PenMount 9036 Touch Controller Board PenMount 9036 control board is a powerful RS-232 touch screen control board to support 4-, 5-, and 8-wire touch screens by executing the same drivers as all PenMount series control board and ICs. PenMount 9036 is good for all kinds of resistive touch screens, user could put PenMount 9036 control board in different systems space and connected to system’s serial interface. PenMount 9036 is selected the different type touch screen by dip switch, also with automatic pin adjustment by software drivers. Electrical Specifications: Touch Screen: For 4-, 5- & 8-wire analog resistive type Touch Screen Controller DMC9000 Communications: RS-232 Baud Rate: 19200 and 9600 baud rate selection Resolution: 2048 x 2048 (10-bit A/D converter inside) Mode selection: PnP or non-PnP Power Input: 5V to 12V DC Power Consumption: Board Size: 12V: 23mA+ i where (i = v/touch screen sheet R) 5V: 20mA+ i where (i = v/touch screen sheet R) 60 x 25 mm Portrait: Support 90o to 270o screen rotation Static Protection: ESD device optional Storage/Working Temperature Storage -40°C - +85°, Working: 0°C - +70°C Others: Touch activate indication LED on board, Advanced calibration, Multi-Monitor Display, Right button, Linearity grid Noise filtering, Auto pin assignment, Beep sound Changes that contribute to technical improvement are subject to alternations 2003 Bearb. Gepr. Vert. Date 30.07. 30.07. Name Maurer Maurer Touch Screen - Control Board RS-232 4-, 5-, 8- wire EDV-Datasheet SPECIFICATIONS don’t change manually Manufactured by Apex Material Technology Corp. PenMount 9036 H 1070,0038.01-.04 a 2002057 24.10.2005 Maurer Zu Änd. Datum Name D 79346 Endingen Blatt 1 von 2 Index: a Driver Software DOS, Windows 3.11, Windows 95/98/Me, Windows NT/2000/XP, QNX, Linux, Windows CE (for both X86 and SA CPU) Windows CE.Net (X86, SA CPU & Xscale) Actual driver overview and download: http://www.amtouch.com.tw/downloads/drivers.htm Connector Definition JP1: - Pin 1 and P2: pin 1: ‘Ground’, pin 2: for 5V to 12V DC power - Pin 3 to Pin 6: PIN3: RTS PIN4: TXD PIN5: RXD PIN6: Ground JP2: Touch Screen Lines: 8-Wire PIN1 Right Sense PIN2 Left Sense PIN3 Bottom Sense PIN4 Top Sense PIN5 Right Excite PIN6 Left Excite PIN7 Bottom Excite PIN8 Top Excite PIN9 Ground 4-Wire N/A N/A N/A N/A Right Left Bottom Top Ground 5-Wire N/A N/A N/A Sense LR LL UR UL Ground SW1: S1: S2 : S3: S3: Baud rate adjustment, PnP enable or disable, set at ‘ON‘ set at ‘OFF’ 1070. 0038.01 1070. 0038.02 1070. 0038.03 1070. 0038.04 ‘OFF’ is for 19600 bps, ‘ON’ is for 9600 bps ‘OFF’ is enable, ‘OFF’ is disable & S4: set at ‘OFF’ is for 5- wire touch screen & S4: set at ‘ON‘ is for 4 and 8-wire touch screen with cable set 4-wire ZIF, 9pin D-Sub cable 450mm with cable set 4-wire AMPC, 9pin D-Sub cable 450mm with cable set 8-wire AMPC, 9pin D-Sub cable 450mm with cable set 5-wire AMPC, 9pin D-Sub cable 450mm Changes that contribute to technical improvement are subject to alternations 2003 Bearb. Gepr. Vert. Date 30.07. 30.07. Name Maurer Maurer Touch Screen - Control Board RS-232 4-, 5-, 8- wire EDV-Datasheet SPECIFICATIONS don’t change manually Manufactured by Apex Material Technology Corp. PenMount 9036 H 1070,0038.01-.04 a 2002057 24.10.2005 Maurer Zu Änd. Datum Name D 79346 Endingen Blatt 2 von 2 Index: a