BOARDCOM BCM5364P

BCM5364/BCM5364P
®
SENTRY 5 PRODUCT LINE: BCM5364/BCM5364P SECURED SWITCH PROCESSORS
FEATURES
SUMMARY OF BENEFITS
• The most highly integrated access security processors
• 5-port 10/100 Ethernet switch with integrated PHY (TX/FX)
• System-on-a-chip solution offers optimal price/performance
• IEEE 802.1Q (VLAN) support; IEEE 802.1P (4 Priority Queues
- CoS, QoS), DiffServ, ToS support; IEEE 802.1D (Spanning
Tree) support
• 802.1X protocols, IP multicast, IGMP snooping for video
streaming applications, broadcast suppression, and hosting of
multiple subnets
• 128-KB on-chip packet buffer
• General purpose 200-MHz MIPS32™ Processor·
• 8 KB of instruction cache, 4 KB of data cache
• Supports Linux®, VxWorks® operating systems
• BCM5364P supports PCI 2.2, 32-bit/33-MHz host/slave
interface
• Supports four additional PCI devices in host mode
• Extensive interface flexibility
• Interface to flash memory (up to 32 MB)
• Interface to SDRAM/DDRAM (up to 512 MB, 100 MHz)
• GPIO, USB, UART interface
• JTAG/EJTAG support
ratio and form factor, low power dissipation, and fastest time
to market
• Integration of managed five-port Fast Ethernet switch
• Integration of MIPS32 CPU with silicon-proven IPSec
processor facilitates complete packet processing in one pass for
multiple policy-based packet routing and/or packet
transformations (firewall, NAT, VPN, QoS)
• Enables advanced application development with industrystandard operating systems/platforms/tools
• Widely proliferated high-performance MIPS32 CPU enables
advanced application development with industry-standard
operating systems/platforms/tools
• Extensive application software offered
• NAT, filtering (IP, TCP), dynamic firewall, DMZ
• Ethernet routing, static routing, DHCP server/client
• Compatible with other Broadcom devices, enabling optimal
system-level form factor, costs, and power dissipation
• 400-pin PBGA package
• Low power, 1.8V core, 3.3V I/O operation
• Linux Open Source application software support
• Third-party software support
BCM5364/5364P-Based System Applications
BCM5364-Based Wired Home Router
BCM5364P-Based Wireless Router
SDRAM (Up to 512 MB)
BCM5365
Magnetics Magnetics Magnetics Magnetics
RJ-45
RJ-45
RJ-45
RJ-45
Magnetics
RJ-45
TX/RX
Wireless MAC
BCM2050
BCM430X
PCI
BCM5364P
BCM5365
Clock (25 MHz)
Magnetics Magnetics Magnetics Magnetics
RJ-45
RJ-45
RJ-45
RJ-45
4-Port 10/100 LAN
DMZ
4-Port 10/100 LAN
10/100 WAN
FLASH (Up to 64 MB)
BCM5364
FLASH (2 MB)
Clock (25 MHz)
SDRAM(32MB)
Magnetics
RJ-45
10/100 WAN
OVERVIEW
SDRAM I/F
USB
GPIO
UART
On-Chip Bus
FLASH
I/F
(32-Bit/33-MHz)
4-KB D-CACHE
On-Chip Bus
PCI 2.2
Host
On-Chip Bus
8-KB I-CACHE
200-MHz
MIPS32
Core
MMU
Symmetric Key
Engine
75 Mbps
On-Chip Bus
Ethernet MAC/MII
Ethernet
Switch
Controller
4-Port 10/100
LAN PHY
10/100
WAN PHY
128-KB
Packet Buffer
Note: PCI Interface Supported in 5365P Only
Broadcom's BCM5364 and BCM5364P, two System-On-Chips, are the
most highly integrated access switch processor there are. The
BCM5364/BCM5364P also features an on-chip, five-port 10/100
Ethernet switch with management features. This switch processor also
offers extensive processor and interface integration featuring an
integrated 200-MHz MIPS32™ core, UART, flash and SDRAM/
DDRAM interfaces. The BCM5364P also supports a PCI interface. Both
the devices support IPSec encryption and authentication in a single pass.
The integrated 200-MHz MIPS32™ core of the BCM5364/BCM5364P
has a 2-way set-associative 8-KB instruction cache and a 4-KB data
cache The CPU includes the MMU, which enables support for various
RTOS.
The BCM5364/BCM5364P also supports interfaces that enable systemlevel cost savings, a better form factor, and lower power dissipation. The
BCM5364/BCM5364P supports up to 512 MB of SDRAM/DDRAM
and 64 MB of flash memory.
The BCM5364P also supports the PCI version 2.2, 32-bit/33-MHz host
interface, allowing enumeration of four external PCI peripherals as a
way to extend system functionality. The UART enables a glueless
interface to serial devices such as modems.
Broadcom provides its proven API and drivers for integration with thirdparty application software. Broadcom also offers application software to
build complete system applications. Application software support
includes functions such as firewall (dynamic firewall, DMZ hosting,
filtering-IP/TCP, NAT/PAT), VPN (IKE engines, IPSec drivers and
API, PPTP-passthrough, PPPoE client-PAP and CHAP authentication),
QoS/CoS/ToS (static and dynamic Ethernet routing, VLAN tagging),
and many other features.
A single BCM5364/BCM5364P based platform is easy to reuse for
other types of access to market segment equipment ranging in throughput
performance from T1/E1 to 100 Mbps. This equipment includes wireless
and wired home/residential and SOHO firewall and VPN appliances,
wireless access points, and many types of customer premises equipment
(CPE) devices.
Broadcom®, the pulse logo, and Connecting everything® are trademarks of Broadcom Corporation and/
or its subsidiaries in the United States and certain other countries. All other trademarks mentioned are the
property of their respective owners.
®
BROADCOM CORPORATION
16215 Alton Parkway, P.O. Box 57013
Irvine, California 92619-7013
© 2004 by BROADCOM CORPORATION. All rights reserved.
5364_5364P-PB00-R 04/01/04
Phone: 949-450-8700
Fax: 949-450-8710
E-mail: [email protected]
Web: www.broadcom.com