BCM4326 ® AirForce One™ SINGLE-CHIP IEEE 802.11b/g™ MAC/BASEBAND/RADIO WITH INTEGRATED CPU POWER MANAGEMENT FEATURES • Highly integrated one-chip MAC, baseband, direct conversion • • • • • • radio, and ARM7™ pro cessor fo r low-power embedded applications. Designed to meet exacting requirements of mobile devices, including small form factor, ultra-low power consumption, and low cost. Footprint-compatible with BCM4328 single-chip IEEE 802.11a/b/g™ dual-band MAC/baseband/radio with integrated CPU. Support for multiple interface options popular in embedded designs: SDIO (1- and 4-bit) and USB 2.0. Embedded ARM7 CPU that executes the full WLAN driver, eliminating the need for complicated wireless LAN integration into the host platform. Portable streamlined software interface for easy migration to embedded operating systems. Support for advanced Bluetooth ® coexistence algorithms with hardware interface targeted at voice and multimedia applications. On-chip boot ROM and SRAM for a complete WLAN subsystem. • • Internal fractional nPLL allows support for a wide range of • DSP architecture reduces the power required to transmit data by 30 percent. • Low power consumption improves battery life of Wi-Fi® devices, including handheld devices and consumer electronics. • Integrated CPU; designed for low CPU usage to ensure that system resources are available for handheld applications. • Dynamic power management through on-board PMU. • Only a single 3.3V external supply voltage is required. AirForce™ FEATURE SET • SmartRadio™: continuous calibration reduces test time and • • • reference clock frequencies. • Requires only a single 3.3V external supply voltage. • 3.3V/1.8V-tolerant I/O. • Support for 2.5V–5.5V VBAT supplies with a single external • switching regulator. • On-chip UART and JTAG interfaces for ease of debugging. • Available in FBGA (0.5-mm pitch) and WLCSP (0.25-mm pitch) packages. • Integrated power amplifier for medium-transmit power embedded devices; interface to external power amplifier for high-power applications. • • improves manufacturability. Xpress™ technology: standards-based frame bursting improves overall network efficiency. 125 High Speed M ode™: standards-plus perform ance enhancement delivers best real-world performance when both client and AP support high-speed mode. Enhanced BroadRange™ technology: standards-compliant features increase receive sensitivity to improve range and distance performance at higher data rates. Security: • WPA™ (personal) and WPA2™ (personal) certified for powerful encryption and authentication • AES and TKIP in hardware for faster data encryption and IEEE 802.11i™ compatibility • Cisco® Compatible Extensions (CCX, CCX2.0, CCX3.0, CCX4.0) certified • SecureEasySetup™ for simple Wi-Fi setup and WPA2/WPA security configuration Worldwide support: global products supported with worldwide homologated design. OneDriver™: single driver across all platforms—IEEE 802.11a/ b/g/n—simplifies driver update process and improves customer satisfaction. BCM94326 Sample Module BLOCK DIAGRAM AND SPECIFICATIONS BCM4326 WEP/AES Encryption 2.4-GHz PA and Front-End Circuit IEEE 802.11 2.4 GHz Direct Conversion Radio IEEE 802.11g Baseband MAC Host I/F: SDIO or USB 2.0 (BCM4326U) Buffers Host I/F Silicon Backplane Vreg 3.3V 384-KB SRAM Ref Clock/Crystal: (12, 13, 14.4, 15.36, 16.2, 16.8, 19.2, 19.8, 20, 24, 26, 38.4 MHz, 32-kHz LPO also supported) 80-KB ROM ARM7 SPROM, UART, JTAG, GPIO Interfaces Vreg PLL SPROM Interface SDIO (4-wire, 1-wire, SPI), USB 2.0 (BCM4326U) System Bus Support SDIO, USB 2.0 UART JTAG GPIO Standard IEEE 802.11g, IEEE 802.11b Data Rate IEEE 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps; IEEE 802.11b: 11, 5.5, 2, 1 Mbps Modulation OFDM, CCK, DQPSK, DBPSK Network Architectures Infrastructure and ad hoc Operating Frequencies 2.4 GHz to 2.497 GHz Operating Channels 11 for North America; 13 for Europe; 14 for Japan RF Output Power 20 dBm maximum Antenna Connectors Hardware diversity support—transmit and receive Power Requirements 3.3V (2.5V–5.5V VBAT power supplies provided by using a single external switching regulator) Power Consumption Receive: < 295 mW Transmit: < 425 mW (at 7 dBm), < 625 mW (at 15 dBm; varies depending on external power amplifier) Security IEEE 802.1X; WEP, WEP2, WPA (personal), WPA2 (personal); TKIP and AES hardware acceleration, IEEE 802.11i Dimensions FBGA: 10 mm x 10 mm Software Support • Windows® CE 5.0, Linux®,Windows® XP • Portable software interface for easy migration to other embedded operating systems including Symbian, Rex, iTRON, VxWorks® Certifications IEEE 802.11-compliant; Wi-Fi CERTIFIED™ For ordering information, contact your Broadcom Sales Representative. Broadcom®, the pulse logo, Connecting everything®, the Connecting everything logo, AirForce™, AirForce One™, SecureEasySetup™, OneDriver™, BroadRange™, SmartRadio™, 125 High Speed Mode™, and Xpress™ are among the trademarks of Broadcom Corporation and/or its affiliates in the United States, certain other countries and/or the EU. Bluetooth® is a trademark of the Bluetooth SIG. Any other trademarks or trade names mentioned are the property of their respective owners. ® BROADCOM CORPORATION 16215 Alton Parkway, P.O. Box 57013 Irvine, California 92619-7013 © 2006 by BROADCOM CORPORATION. All rights reserved. 4326-PB02-RDS 12/05/06 Phone: 949-450-8700 Fax: 949-450-8710 E-mail: [email protected] Web: www.broadcom.com