Vishay BFC23314274 Interference suppression film capacitors mkp radial potted type Datasheet

MKP338 1 X1
www.vishay.com
Vishay BCcomponents
Interference Suppression Film Capacitors
MKP Radial Potted Type
FEATURES
• 15 mm to 27.5 mm lead pitch
• Supplied loose in box, taped on ammopack
or reel
• Material categorization: For definitions of
compliance please see www.vishay.com/doc?99912
APPLICATIONS
For standard across the line X1 applications.
See also application note: www.vishay.com/doc?28153
QUICK REFERENCE DATA
E12 series 0.01 μF to 1 μF
preferred values acc. to E6
Capacitance range (E12 series)
Capacitance tolerance
± 20 %, ± 10 %, ± 5 %
Rated AC voltage
440 VAC; 50 Hz to 60 Hz
Permissible DC voltage
1000 VDC
50/105/56/C for product volumes > 1750 mm3
50/105/56/B for volumes  1750 mm3
Climatic testing class acc. to IEC 60068-1
Maximum application temperature
105 °C
IEC 60384-14 and EN 60384-14
IEC 60065 pass. flamm. class B for volumes > 1750 mm3
UL 60384-14
Reference standards
Dielectric
Polypropylene film
Electrodes
Metallized film
Mono construction
Construction
Encapsulation
Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0
Leads
Tinned wire
C-value; tolerance; rated voltage; sub-class; manufacturer’s type;
code for dielectric material; manufacturer location, year and week;
manufacturer’s logo or name; safety approvals
Marking
Note
• For more detailed data and test requirements, contact [email protected]
DIMENSIONS
l
w
h
lt
P
Revision: 18-Jul-13
Ø dt
Document Number: 28116
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 1 X1
www.vishay.com
Vishay BCcomponents
COMPOSITION OF CATALOG NUMBER
15.0 mm
22.5 mm
27.5 mm
338 1
X1
PACKAGING
338 1
Loose in box
X1
Taped on reel
TYPE
(1)
C-TOL.
± 20 %
X1
BFC2 338 17 ...
C-TOL.
± 10 %
±5%
± 10 %
±5%
± 10 %
±5%
± 10 %
±5%
AL TE RN AT IVE C- TO L.
Lead length 5.0 mm ± 1.0 mm
Lead length 25.0 mm ± 2.0 mm
Taped on reel (1)
PREFERRED TYPES
BFC2 338 10 ...
B FC 2 338 12 . . .
B FC 2 33 8 14 .. .
H = 18.5 mm; for P0 = 12.7 mm; reel diameter = 500 mm
Lead length 3.5 mm ± 0.3 mm
Loose in box
2
3
4
5
338 1X XX X
LEAD CONFIGURATION
Lead length 3.5 mm ± 0.3 mm
L e a d l e n g t h 5 .0 m m ± 1 . 0 m m
Lead length 25. 0 m m ± 2.0 m m
PACKAGING
338 1
0.1
1
10
100
Example:
104 = 10 x 10 = 100 nF
(except special numbers)
BFC2
TYPE
MULTIPLIER
(nF)
CAPACITANCE
(numerically)
TYPE AND PITCHES
H = 18.5 mm; P0 = 12.7 mm; reel diameter = 500 mm
ON R EQ UE ST
See tables for detail
Note
(1) For detailed tape specification refer to packaging information: www.vishay.com/doc?28139
SPECIFIC REFERENCE DATA
DESCRIPTION
VALUE
Rated AC voltage (URAC)
440 V
Permissible DC voltage (URDC)
1000 V
Tangent of loss angle:
at 1 kHz
C 470 nF
 10 x
10-4
C > 470 nF
20 x
10-4
at 10 kHz
20 x 10-4
70 x 10-4
Rated voltage pulse slope (dU/dt)R at 615 VDC
Pitch = 15 mm
250 V/μs
Pitch = 22.5 mm
150 V/μs
Pitch = 27.5 mm
R between leads, for C  0.33 μF at 100 V, 1 min
RC between leads, for C > 0.33 μF at 100 V, 1 min
100 V/μs
> 15 000 M
> 5000 s
R between leads and case, 100 V, 1 min
> 30 000 M
Withstanding (DC) voltage (cut off current 10 mA) (1), rise time  1000 V/s
3400 V, 1 min
Withstanding (AC) voltage between leads and case
2380 V, 1 min
Maximum application temperature
105 °C
Note
(1) See “Voltage Proof Test for Metallized Film Capacitors”: www.vishay.com/doc?28169
Revision: 18-Jul-13
Document Number: 28116
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 1 X1
www.vishay.com
Vishay BCcomponents
ELECTRICAL DATA AND ORDERING INFORMATION
CATALOG NUMBER BFC2 338 1XXXX AND PACKAGING
URAC
CAP.
(μF)
DIMENSIONS
wxhxl
(mm)
TAPED REEL (1)(2)
LOOSE IN BOX
MASS
(g) (3)
SHORT LEADS
lt = 3.5 mm
± 0.3 mm
lt = 5.0 mm
± 1.0 mm
LONG LEADS
SPQ
lt = 25.0 mm
± 2.0 mm
Ø = 500 mm
SPQ
H = 18.5 mm;
P0 = 12.7 mm
SPQ
PITCH = 15.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-tol. = ± 20 %
0.010
10103
12103
14103
0.012
10123
12123
14123
10153
12153
0.018
10183
12183
14183
0.022
10223
12223
14223
17223
0.027
10273
12273
14273
17273
10333
12333
0.015
0.033
5.0 x 11.0 x 17.5
6.0 x 12.0 x 17.5
1.0
1.4
1000
1000
14153
14333
17103
17123
1000
17153
1100
17183
1000
17333
900
PITCH = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-tol. = ± 20 %
0.039
0.047
0.056
0.068
0.082
0.10
7.0 x 13.5 x 17.5
1.8
8.5 x 15.0 x 17.5
2.4
10.0 x 16.5 x 17.5
3.0
10393
12393
10473
12473
10563
12563
10683
12683
10823
12823
10104
12104
750
750
500
14393
14473
14563
14683
14823
14104
500
500
450
17393
17473
17563
17683
17823
17104
800
650
600
PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-tol. = ± 20 %
0.12
10124
12124
10154
12154
10184
12184
10224
12224
3.8
10.0 x 19.5 x 26.0
6.8
0.27
11.0 x 21.0 x 31.0
7.4
10274
12274
100
14274
125
0.33
13.0 x 23.0 x 31.0
9.2
10334
12334
100
14334
125
10394
12394
10474
12474
10564
12564
0.18
0.22
200
14124
8.5 x 18.0 x 26.0
0.15
200
14154
14184
14224
250
200
17124
17154
17184
17224
450
350
PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-tol. = ± 20 %
440
0.39
0.47
0.56
0.68
0.82
1.00
15.0 x 25.0 x 31.5
12.3
18.0 x 28.0 x 31.5
16.1
21.0 x 31.0 x 31.0
20.3
10684
12684
10824
12824
10105
12105
100
100
50
14394
14474
14564
14684
14824
14105
125
-
-
100
75
PITCH = 15.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-tol. = ± 10 %
0.010
18114
18314
18514
0.012
18115
18315
18515
18116
18316
0.015
5.0 x 11.0 x 17.5
1.0
1000
18516
18914
1000
18915
18916
0.018
18117
18317
18517
18917
0.022
18118
18318
18518
18918
18119
18319
0.027
6.0 x 12.0 x 17.5
1.4
1000
18519
1000
18919
1100
900
PITCH = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-tol. = ± 10 %
0.033
0.039
0.047
0.056
0.068
0.082
7.0 x 13.5 x 17.5
1.8
8.5 x 15.0 x 17.5
2.4
10.0 x 16.5 x 17.5
3.0
Revision: 18-Jul-13
18121
18321
18122
18322
18123
18323
18124
18324
18125
18325
18126
18326
750
750
500
18521
18522
18523
18524
18525
18526
500
500
450
18921
18922
18923
18924
18925
18926
800
650
600
Document Number: 28116
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 1 X1
www.vishay.com
Vishay BCcomponents
ELECTRICAL DATA AND ORDERING INFORMATION
CATALOG NUMBER BFC2 338 1XXXX AND PACKAGING
URAC
CAP.
(μF)
DIMENSIONS
wxhxl
(mm)
TAPED REEL (1)(2)
LOOSE IN BOX
MASS
(g) (3)
SHORT LEADS
lt = 3.5 mm
± 0.3 mm
lt = 5.0 mm
± 1.0 mm
LONG LEADS
SPQ
lt = 25.0 mm
± 2.0 mm
Ø = 500 mm
SPQ
H = 18.5 mm;
P0 = 12.7 mm
SPQ
18927
550
PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-tol. = ± 10 %
0.10
0.12
0.15
0.18
7.0 x 16.5 x 26.0
2.9
8.5 x 18.0 x 26.0
3.8
10.0 x 19.5 x 26.0
6.8
18127
18327
18128
18328
18129
18329
18131
18331
200
200
200
18527
18528
18529
18531
250
250
200
18928
18929
450
18931
350
-
-
PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-tol. = ± 10 %
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
11.0 x 21.0 x 31.0
7.4
13.0 x 23.0 x 31.0
9.2
15.0 x 25.0 x 31.0
12.3
18.0 x 28.0 x 31.0
16.1
21.0 x 31.0 x 31.0
20.3
18132
18332
18133
18333
18134
18334
18135
18335
18136
18336
18137
18337
18138
18338
18139
18339
100
100
100
100
50
18532
18533
18534
18535
18536
18537
18538
18539
125
125
125
100
75
PITCH = 15.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-tol. = ± 5 %
0.010
18214
18414
18614
0.012
18215
18415
18615
18216
18416
0.015
440
5.0 x 11.0 x 17.5
1.0
1000
18616
18934
1000
18935
18936
0.018
18217
18417
18617
18937
0.022
18218
18418
18618
18938
18219
18419
0.027
6.0 x 12.0 x 17.5
1.4
1000
18619
1000
18939
1100
900
PITCH = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-tol. = ± 5 %
0.033
0.039
0.047
0.056
0.068
0.082
7.0 x 13.5 x 17.5
1.8
8.5 x 15.0 x 17.5
2.4
10.0 x 16.5 x 17.5
3.0
18221
18421
18222
18422
18223
18423
18224
18424
18225
18425
18226
18426
750
750
500
18621
18622
18623
18624
18625
18626
500
500
450
18941
18942
18943
18944
18945
18946
800
650
600
PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-tol. = ± 5 %
0.10
0.12
0.15
0.18
8.5 x 18.0 x 26.0
3.8
10.0 x 19.5 x 26.0
6.8
11.0 x 21.0 x 31.0
7.4
18227
18427
18228
18428
18229
18429
18231
18431
200
200
18627
18628
18629
18631
250
200
18947
18948
18949
18951
450
350
PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-tol. = ± 5 %
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
13.0 x 23.0 x 31.0
9.2
15.0 x 25.0 x 31.5
12.3
18.0 x 28.0 x 31.5
16.1
21.0 x 31.0 x 31.0
20.3
18232
18432
18233
18433
18234
18434
18235
18435
18236
18436
18237
18437
18238
18438
18239
18439
100
100
100
100
50
18632
18633
18634
18635
18636
18637
18638
18639
125
125
125
-
-
100
75
Notes
• SPQ = Standard Packing Quantity
(1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information: www.vishay.com/doc?28139
0
(2) Reel diameter = 356 mm is available on request
(3) Weight for short lead product only
Revision: 18-Jul-13
Document Number: 28116
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 1 X1
www.vishay.com
Vishay BCcomponents
APPROVALS
SAFETY APPROVALS X1
VOLTAGE
VALUE
FILE NUMBERS
EN 60384-14 (ENEC)
(= IEC 60384-14)
440 VAC
10 nF to 1 μF
FI 2013013
UL 60384-14
440 VAC
10 nF to 1 μF
E354331
CSA E384-14
440 VAC
10 nF to 1 μF
E354331
CB-test certificate
440 VAC
10 nF to 1 μF
FI 5256 A1
The ENEC-approval together with the CB-certificate replace all national marks of the following countries (they have already signed the
ENEC-agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg;
Netherlands; Norway; Portugal; Slovenian; Spain; Switzerland and United Kingdom.
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting in printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the
printed-circuit board:
• For pitches  15 mm capacitors shall be mechanically fixed by the leads
• For longer pitches the capacitors shall be mounted in the same way and the body clamped
Space Requirements on Printed Circuit Board
The maximum space for length (Imax.), width (wmax.) and height (hmax.) of film capacitors to take in account on the printed circuit
board is shown in the drawings.
• For products with pitch  15 mm, w =l = 0.3 mm; h = 0.1 mm
Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product
concerned.
wmax. = W + Δ
Eccentricity
Imax. = I + Δ
CBA116
hmax. = h + Δ
Seating plane
SOLDERING
For general soldering conditions and wave soldering profile, we refer to the application note: 
“Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171
Storage Temperature
Tstg = - 25 °C to + 35 °C with RH maximum 75 % without condensation
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of
86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
Revision: 18-Jul-13
Document Number: 28116
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 1 X1
www.vishay.com
Vishay BCcomponents
CHARACTERISTICS
10 3
ΔC/C
(%)
Dissipation
Factor (x 10- 4)
4
2
typical
10 2
0
µF
=1 F
C < 1µ
<C
nF
nF ≤ 220
0
22 < C
F
7n
nF
47 < C ≤ 4
F
10 n
max.
-2
101
-4
min.
-6
10
- 50
0
50
Tamb (°C) 100
0
1
10
Capacitance as a function of ambient temperature
(typical curve)
2
10
3
10
f(Hz) 10 5
4
Tangent of loss angle as a function of frequency
(typical curve)
103
f (Mhz)
Impedance
(Ω)
102
102
10
47
10
10
10
1
nF
101
nF
0n
F
47
0n
F
10
00
nF
100
X1
100
10-1
10-2
104
10-1
5
10
6
10
7
10
f (Hz)
1
8
10
Impedance as a function of frequency
(typical curve)
10
100
1000 °C (nF) 10 000
Resonant frequency as a function of capacitance
(typical curve)

103
AC voltage
(V)
AC current
(mA)
104
103
1000 nF
470 nF
102
100 nF
47 nF
101
10 nF
4.7 nF
100
1 nF
102
Tamb ≤ 105 °C
101
101
102
103
104
f (Hz)
Max. RMS voltage as a function of frequency
Revision: 18-Jul-13
105
10-1
101
Tamb ≤ 105 °C
102
103
104
f (Hz)
105
Max. RMS current as a function of frequency
Document Number: 28116
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 1 X1
www.vishay.com
Vishay BCcomponents
RC (s)
106
105
104
0
20
40
60
80
100
Tamb (°C)
Insulation resistance as a function of ambient temperature
APPLICATION NOTES
• For X1 electromagnetics interference suppression in standard across the line applications (50 Hz/60 Hz) with a maximum
mains voltage of 440 VAC.
• For series impedance applications we refer to application note: www.vishay.com/doc?28153
• For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For
information depending of the capacitance value and the number of parallel connections contact: [email protected]
• These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse
programs must be used.
• The maximum ambient temperature must not exceed 105 °C.
• Rated voltage pulse slope:
If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 615 VDC and
divided by the applied voltage.

INSPECTION REQUIREMENTS
General Notes
Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-14
ed-3 and Specific Reference Data”.
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF SAMPLE OF
SUB-GROUP C1
4.1 Dimensions (detail)
As specified in chapters “General data” of
this specification
Initial measurements
Capacitance
Tangent of loss angle at 10 kHz
4.3 Robustness of terminations
Tensile: Load 10 N; 10 s
Bending: Load 5 N; 4 x 90°
4.4 Resistance to soldering heat
No pre-drying
Method: 1A
Solder bath: 280 °C ± 5 °C
Duration: 10 s
Revision: 18-Jul-13
No visible damage
Document Number: 28116
7
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 1 X1
www.vishay.com
Vishay BCcomponents
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF SAMPLE OF
SUB-GROUP C1
4.19 Component solvent resistance
Isopropylalcohol at room temperature
Method: 2
Immersion time: 5 min ± 0.5 min
Recovery time:
Min. 1 h, max. 2 h
4.4.2 Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|C/C|  5 % of the value measured initially
Tangent of loss angle
Increase of tan   0.008
Compared to values measured initially
Insulation resistance
As specified in section “Insulation
Resistance” of this specification
SUB-GROUP C1B PART OF SAMPLE OF
SUB-GROUP C1
Initial measurements
Capacitance
Tangent of loss angle at 10 kHz
4.20 Solvent resistance of the marking
Isopropylalcohol at room temperature
Method: 1
Rubbing material: Cotton wool
Immersion time: 5 min ± 0.5 min
4.6
A = - 55 °C
B = + 105 °C
5 cycles
Duration t = 30 min
Rapid change of temperature
No visible damage
Legible marking
4.6.1 Inspection
4.7 Vibration
Visual examination
Mounting: See section “Mounting” of this
specification
Procedure B4
Frequency range: 10 Hz to 55 Hz
Amplitude: 0.75 mm or
acceleration 98 m/s2
(whichever is less severe)
Total duration: 6 h
No visible damage
4.7.2 Final inspection
Visual examination
No visible damage
4.9
Mounting: See section “Mounting” for more
information
Pulse shape: Half sine
Acceleration: 490 m/s2
Duration of pulse: 11 ms
Shock
4.9.2 Final measurements
Revision: 18-Jul-13
Visual examination
No visible damage
Capacitance
|C/C|  5 % of the value measured initially
Tangent of loss angle
Increase of tan   0.008
Compared to values measured initially
Insulation resistance
As specified in section “Insulation
Resistance” of this specification
Document Number: 28116
8
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 1 X1
www.vishay.com
Vishay BCcomponents
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1 COMBINED SAMPLE OF
SPECIMENS OF SUB-GROUPS C1A AND
C1B
4.11
Climatic sequence
4.11.1 Initial measurements
Capacitance
Measured in 4.4.2 and 4.9.2
Tangent of loss angle
Measured initially in C1A and C1B
4.11.2 Dry heat
Temperature: 105 °C
Duration: 16 h
4.11.3 Damp heat cyclic
Test Db
First cycle
4.11.4 Cold
Temperature: - 55 °C
Duration: 2 h
4.11.5 Damp heat cyclic
Test Db
Remaining cycles
4.11.6 Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|C/C|  5 % of the value measured in 4.11.1.
Tangent of loss angle
Increase of tan   0.008
Compared to values measured in 4.11.1.
Voltage proof
1900 VDC; 1 min between terminations
No permanent breakdown or flash-over
Insulation resistance
 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C2
4.12
Damp heat steady state
56 days, 40 °C, 90 % to 95 % RH
No load
4.12.1 Initial measurements
Capacitance
Tangent of loss angle at 1 kHz
4.12.3 Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|C/C|  5 % of the value measured in 4.12.1.
Tangent of loss angle
Increase of tan   0.008
Compared to values measured in 4.12.1.
Voltage proof
1900 VDC; 1 min between terminations
No permanent breakdown or flash-over
Insulation resistance
 50 % of values specified in section
“Insulation Resistance” of this specification
Revision: 18-Jul-13
Document Number: 28116
9
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 1 X1
www.vishay.com
Vishay BCcomponents
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C3
4.13.1 Initial measurements
Capacitance
Tangent of loss angle at 10 kHz
4.13
3 successive impulses, full wave, peak
voltage:
Impulse voltage
No self healing breakdowns or flash-over
X1: 4 kV
Max. 24 pulses
4.14
Endurance
Duration: 1000 h
1.25 x URAC at 105 °C
Once in every hour the voltage is increased to
1000 VRMS for 0.1 s via resistor of 47 ± 5 %
4.14.7 Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|C/C|  10 % compared to values measured
in 4.13.1.
Tangent of loss angle
Increase of tan   0.008
Compared to values measured in 4.13.1.
Voltage proof
No permanent breakdown or flash-over
1900 VDC; 1 min between terminations
2380 VAC; 1 min between terminations
and case.
Insulation resistance
 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C4
4.15
Charge and discharge
10 000 cycles
Charged to 615 VDC
Discharge resistance:
615 V DC
R = ---------------------------------------1.5 x C (dU/dt)
4.15.1 Initial measurements
Capacitance
Tangent of loss angle at 10 kHz
4.15.3 Final measurements
Capacitance
Tangent of loss angle
|C/C|  10 % compared to values measured
in 4.15.1.
Increase of tan   0.008
Compared to values measured in 4.15.1.
Insulation resistance
50 % of values specified in section
“Insulation Resistance” of this specification
Resonance frequency
 0.9 times value as specified in section
“Resonant Frequency” of this specification
SUB-GROUP C5
4.16
Radio frequency characteristic
Revision: 18-Jul-13
Document Number: 28116
10
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP338 1 X1
www.vishay.com
Vishay BCcomponents
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C6
4.17 Passive flammability
Class B
Bore of gas jet: Ø 0.5 mm
Fuel: Butane
Test duration for actual volume V in mm3:
V  250: 10 s
After removing test flame from capacitor, the
capacitor must not continue to burn for more
than 10 s. No burning particle must drop
from the sample.
250 < V  500: 20 s
500 < V  1750: 30 s
V > 1750: 60 s
One flame application
12 mm
~ 8 mm
45.0°
SUB-GROUP C7
4.18 Active flammability
20 cycles of 4 kV discharges on the test
capacitor connected to URAC.
The cheese cloth around the capacitors shall
not burn with a flame.
No electrical measurements are required.
Revision: 18-Jul-13
Document Number: 28116
11
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
Similar pages