MKP338 6 Y2 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type FEATURES l 168x12(halfpage) l w w • AEC-Q200 qualified h • 7.5 mm to 27.5 mm lead pitch, 15 mm and 10 mm bent back to 7.5 mm, supplied loose in box, taped on ammopack or reel h h' F' lt P ¯dt (1) F H ¯dt 10 • Compliant to RoHS Directive 2002/95/EC PERMISSIBLE DC VOLTAGE 15 Dimensions in mm DC 1000 V ENCAPSULATION Note (1) |F - F’| < 0.3 mm F = 7.5 mm + 0.6 mm/- 0.1 mm Plastic case, epoxy resin sealed, flame retardant class UL 94 V-0 APPLICATIONS For standard line bypass (between line and ground) Y2 applications See also application note: www.vishay.com/doc?28153 CLIMATIC TESTING CLASS ACC. TO IEC 60068-1 55/105/56/B CAPACITANCE RANGE (E12 SERIES) REFERENCE STANDARDS “IEC 60384-14 ed-3 and EN 60384-14” “IEC 60065 requires, pass. flamm. class B” UL1414; CSA - C22.2 No. 1; UL1283; ENEC; CSA E 384-14-95 MARKING CAPACITANCE TOLERANCE ± 20 %; ± 10 %; ± 5 % LEADS C-value; tolerance; rated voltage; sub-class; manufacturer’s type designation; code for dielectric material, manufacturer location; manufacturer’s logo, year and week; safety approvals DIELECTRIC E12 series 0.001 µF to 0.47 µF Preferred values acc. to E6 Tinned wire MAXIMUM APPLICATION TEMPERATURE 105 °C Polypropylene film DETAIL SPECIFICATION ELECTRODES For more detailed data and test requirements contact: [email protected] Metallized film CONSTRUCTION Series construction Triple construction RATED VOLTAGE AC 300 V; 50 Hz to 60 Hz www.vishay.com 364 For technical questions, contact: [email protected] Document Number: 28114 Revision: 22-Dec-10 MKP338 6 Y2 Interference Suppression Film Capacitors MKP Radial Potted Type Vishay BCcomponents COMPOSITION OF CATALOG NUMBER TYPE AND PITCHES 7.5 mm 7.5 mm (bent back) 338 6 10.0 mm 15.0 mm Y2 22.5 mm 27.5 mm BFC2 2222 (*) MULTIPLIER (nF) 0.1 2 1 3 10 4 100 5 CAPACITANCE (numerically) 338 338 6X 6X XX X XX X Example: 104 = 10 x 10 = 100 nF (except special numbers) (*) old ordering code TYPE PACKAGING 338 6 Loose in box Y2 Taped ammo 338 6 Y2 338 6 Y2 Loose in box Taped reel (1) Loose in box Lead length 5.0 mm ± 1.0 mm Lead length 25.0 mm ± 2.0 mm 338 6 Y2 STANDARD DIMENSIONS Lead length 3.5 mm + 1 mm/- 0.5 mm (pitch 7.5 mm and 10 mm) Lead length 3.5 mm ± 0.3 mm (pitch > 10 mm) Lead length 5.0 mm ± 1.0 mm Lead length 25.0 mm ± 2.0 mm Pitch = 7.5 mm H = 18.5 mm; P0 = 12.7 mm ALTERNATIVE PITCH SIZES Lead length 3.5 mm + 1 mm/- 0.5 mm (pitch 7.5 mm and 10 mm) Lead length 3.5 mm ± 0.3 mm (pitch > 10 mm) Lead length 5.0 mm ± 1.0 mm Lead length 25.0 mm ± 2.0 mm ALTERNATIVE TAPED VERSION Pitch = 7.5 mm and 10.0 mm H = 18.5 mm; for P0 = 12.7 mm; reel diameter = 500 mm Pitch bent back to 7.5 mm H = 16.0 mm; P0 = 15.0 mm; reel diameter = 500 mm ALTERNATIVE C-TOL Lead length 3.5 mm + 1 mm/- 0.5 mm (pitch 7.5 mm and 10 mm) Lead length 3.5 mm ± 0.3 mm (pitch > 10 mm) Taped ammo (1) Taped reel (1) Pitch = 7.5 mm H = 18.5 mm; for P0 = 12.7 mm Pitch bent back to 7.5 mm H = 16.0 mm; P0 = 15.0 mm; reel diameter = 500 mm Pitch = 7.5 mm and 10.0 mm H = 18.5 mm; P0 = 12.7 mm; reel diameter = 500 mm C-TOL PREFERRED TYPES BFC2 338 60 BFC2 338 62 BFC2 338 64 ± 20 % BFC2 338 66 ON REQUEST ± 20 % See tables for details ON REQUEST ± 20 % See tables for details ON REQUEST ± 10 % ±5% ± 10 % ±5% ± 10 % ±5% ± 10 % ±5% ± 10 % ±5% ± 10 % ±5% See tables for details Note (1) For detailed tape specification refer to “Packaging Information” www.vishay.com/doc?28139 SPECIFIC REFERENCE DATA DESCRIPTION Rated AC voltage (URAC) Permissible DC voltage (URDC) Tangent of loss angle C ≤ 470 nF Rated voltage pulse slope (dU/dt)R at 420 VDC R between leads, for C ≤ 0.33 µF at 100 V; 1 min RC between leads, for C > 0.33 µF at 100 V; 1 min R between leads and case; 100 V; 1 min Withstanding (DC) voltage (cut off current 10 mA) (1); rise time ≤ 1000 V/s Withstanding (AC) voltage between leads and case Maximum application temperature VALUE 300 V 1000 V at 1 kHz ≤ 10 x 10-4 at 10 kHz ≤ 20 x 10-4 100 V/µs > 15 000 MΩ > 5000 s > 30 000 MΩ 3400 V; 1 min 2100 V; 1 min 105 °C Note (1) See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169 Document Number: 28114 Revision: 22-Dec-10 For technical questions, contact: [email protected] www.vishay.com 365 MKP338 6 Y2 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type URAC = 300 V; C-tol = ± 20 % (URDC = 1000 V) CATALOG NUMBER BFC2 338 6X XXX AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS wxhxl (mm) MASS (g) (1) Short leads lt = 3.5 mm + 1 mm/ - 0.5 mm lt = 5.0 mm ± 1.0 mm Pitch = 7.5 mm ± 0.4 mm; dt = 0.50 mm ± 0.05 mm 0.001 60102 0.0012 60122 0.0015 60152 4.0 x 9.0 x 10.0 0.4 0.0018 60182 0.0022 60222 0.0027 60272 0.0033 60332 5.0 x 10.5 x 10.0 0.4 0.0039 60392 0.0047 60472 6.0 x 11.5 v 10.0 0.8 0.0056 60562 Pitch = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.001 68392 0.0012 68393 0.0015 68394 0.0018 68395 4.0 x 10.0 x 12.5 0.6 0.0022 68396 0.0027 68397 0.0033 68398 0.0039 68399 0.0047 68101 0.0056 5.0 x 11.0 x 12.5 0.82 68102 0.0068 68103 0.0082 68104 6.0 x 12.0 x 12.5 1.1 0.01 68105 62102 62122 62152 62182 62222 62272 62332 62392 62472 62562 68401 68402 68403 68404 68405 68406 68407 68408 68106 68107 68108 68109 68111 Long leads SPQ 1500 1000 750 1000 1000 750 lt = 25.0 mm ± 2.0 mm 64102 64122 64152 64182 64222 64272 64332 64392 64472 64562 68409 68411 68412 68413 68414 68415 68416 68417 68112 68113 68114 68115 68116 SPQ 1000 1250 1000 REEL 500 mm (1)(2) AMMOPACK H = 18.5 mm; P0 = 12.7 mm 66102 66122 66152 66182 66222 66272 66332 66392 66472 66562 1250 1000 750 SPQ 1250 1000 750 REEL: Ø = 500 mm H = 18.5 mm; P0 = 12.7 mm 68129 68131 68132 68133 68134 68135 68136 68137 68138 68139 68418 68419 68421 68422 68423 68424 68425 68426 68141 68142 68143 68144 68145 SPQ 2500 2000 1900 1400 1100 900 Notes • SPQ = Standard Packing Quantity (1) H =In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to “Packaging Information” (2) Reel diameter = 365 mm is available on request (3) Weight for short lead product only www.vishay.com 366 For technical questions, contact: [email protected] Document Number: 28114 Revision: 22-Dec-10 MKP338 6 Y2 Interference Suppression Film Capacitors MKP Radial Potted Type Vishay BCcomponents CATALOG NUMBER BFC2 338 6X XXX AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS wxhxl (mm) MASS (g) (1) Short leads lt = 3.5 mm + 1 mm/0.5 mm lt = 5.0 mm ± 1.0 mm Long leads SPQ lt = 25.0 mm ± 2.0 mm SPQ AMMOPACK H = 18.5 mm; P0 = 12.7 mm SPQ REEL 500 mm (1)(2) REEL: Ø = 500 mm H = 18.5 mm; P0 = 12.7 mm SPQ Pitch = 15.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.0068 0.0082 0.01 5.0 x 11.0 x 17.5 1.0 60682 62682 60822 62822 60103 62103 64682 1000 64822 64103 0.012 60123 62123 64123 0.015 60153 62153 64153 60183 62183 0.018 6.0 x 12.0 x 17.5 1.4 1000 64183 68146 1000 68147 68148 1100 68149 1000 68151 68152 900 Pitch = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.022 0.027 0.033 0.039 0.047 0.056 7.0 x 13.5 x 17.5 1.8 8.5 x 15.0 x 17.5 2.4 10.0 x 16.5 x 17.5 3.0 60223 62223 60273 62273 60333 62333 60393 62393 60473 62473 60563 62563 750 750 500 64223 64273 64333 64393 64473 64563 500 500 450 68153 68154 68155 68156 68157 68158 800 650 600 Pitch = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.047 0.056 0.068 0.082 0.1 0.12 0.15 7.0 x 16.5 x 26.0 2.9 8.5 x 18.0 x 26.0 3.8 10.0 x 19.5 x 26.0 6.8 12.0 x 22.0 x 26.0 7.8 68123 68125 68124 68126 60683 62683 60823 62823 60104 62104 60124 62124 60154 62154 200 200 200 150 68127 68128 64683 64823 64104 64124 64154 250 250 200 200 Pitch = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.18 0.22 0.27 0.33 0.39 0.47 13.0 x 23.0 x 31.0 9.2 15.0 x 25.0 x 31.0 12.3 18.0 x 28.0 x 31.0 16.1 21.0 x 31.0 x 31.0 20.3 60184 62184 60224 62224 60274 62274 60334 62334 60394 62394 60474 62474 100 100 100 50 64184 64224 64274 64334 64394 64474 125 125 100 75 Notes • SPQ = Standard Packing Quantity (1) H = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to “Packaging Information” (2) Reel diameter = 365 mm is available on request (3) Weight for short lead product only Document Number: 28114 Revision: 22-Dec-10 For technical questions, contact: [email protected] www.vishay.com 367 MKP338 6 Y2 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type Bent back pitch 7.5 mm CATALOG NUMBER BFC2 338 6X XXX AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS wxhxl (mm) MASS (g) (1) Short leads lt = 3.5 mm + 1 mm/ - 0.5 mm lt = 5.0 mm ± 1.0 mm Long leads SPQ lt = 25.0 mm ± 2.0 mm SPQ REEL 500 mm (1)(2) AMMOPACK H = 16 mm; P0 = 15 mm SPQ REEL: Ø = 500 mm H = 16 mm; P0 = 15 mm SPQ Original pitch = 10.0 mm; bent back pitch = 7.5 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.001 68525 68427 0.0012 68526 68428 0.0015 68527 68429 0.0018 0.0022 4.0 x 12.0 x 12.5 68528 0.6 68529 1300 68431 68432 0.0027 68531 68433 0.0033 68532 68434 0.0039 68533 68435 0.0047 68534 68117 0.0056 5.0 x 13.0 x 12.5 0.82 68535 1000 68118 2000 1900 Original pitch = 15.0 mm; bent back pitch = 7.5 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 66682 0.0068 0.0082 0.01 66822 5.0 x 13.0 x 17.5 1.1 66103 0.012 0.015 0.018 950 66123 66153 6.0 x 14.0 x 17.5 1.4 66183 800 Original pitch = 15.0 mm; bent back pitch = 7.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.022 0.027 7.0 x 15.5 x 17.5 1.8 66223 66273 700 0.033 0.039 8.5 x 17.0 x 17.5 2.4 66333 66393 550 0.047 0.056 10.0 x 18.5 x 17.5 3.0 66473 66563 500 Notes • SPQ = Standard Packing Quantity (1) H = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to “Packaging Information” (2) Reel diameter = 365 mm is available on request (3) Weight for short lead product only www.vishay.com 368 For technical questions, contact: [email protected] Document Number: 28114 Revision: 22-Dec-10 MKP338 6 Y2 Interference Suppression Film Capacitors MKP Radial Potted Type Vishay BCcomponents URAC = 300 V; C-Tol = 10 % (URDC = 1000 V) CATALOG NUMBER BFC2 338 6X XXX AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS wxhxl (mm) Short leads MASS (g) (1) lt = 3.5 mm + 1 mm/ - 0.5 mm lt = 5.0 mm ± 1.0 mm Long leads SPQ lt = 25.0 mm ± 2.0 mm SPQ REEL 500 mm (1)(2) AMMOPACK H = 18.5 mm; P0 = 12.7 mm SPQ REEL: Ø = 500 mm H = 18.5 mm; P0 = 12.7 mm SPQ Pitch = 7.5 mm ± 0.4 mm; dt = 0.50 mm ± 0.05 mm 0.001 61102 0.0012 63102 61122 63122 61152 63152 61182 63182 0.0022 61222 63222 0.0027 61272 0.0033 0.0015 0.0018 0.0039 0.0047 0.0056 4.0 x 9.0 x 10.0 5.0 x 10.5 x 10.0 6.0 x 11.5 x 10.0 0.4 0.4 1500 65102 67102 68179 65122 67122 68181 65152 65182 1000 67152 1250 68182 67182 68183 65222 67222 68184 63272 65272 61332 63332 65332 67272 67332 68185 68186 61392 63392 61472 63472 0.8 1000 750 61562 65392 65472 63562 65562 1250 1000 67392 2000 68187 67472 1000 68188 750 67562 2500 1900 68189 Pitch = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.001 68436 68445 68454 68463 0.0012 68437 68446 68455 68464 0.0015 68438 68447 68456 68465 68439 68448 68441 68449 0.0027 68442 68451 68459 68468 0.0033 68443 68452 68461 68469 0.0039 68444 68453 68462 68471 0.0047 68159 68164 68168 68191 68161 68165 0.0018 0.0022 0.0056 0.0068 0.0082 4.0 x 10.0 x 12.5 0.6 5.0 x 11.0 x 12.5 0.82 6.0 x 12.0 x 12.5 1.1 68162 68166 68163 68167 1000 1000 750 68457 68458 68169 68171 68172 1250 1000 750 68466 68467 68193 68193 68194 1400 1100 900 Notes • SPQ = Standard Packing Quantity (1) H = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to “Packaging Information” (2) Reel diameter = 365 mm is available on request (3) Weight for short lead product only Document Number: 28114 Revision: 22-Dec-10 For technical questions, contact: [email protected] www.vishay.com 369 MKP338 6 Y2 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type CATALOG NUMBER BFC2 338 6X XXX AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS wxhxl (mm) MASS (g) (1) Short leads lt = 3.5 mm + 1 mm/ - 0.5 mm lt = 5.0 mm ± 1.0 mm Long leads SPQ lt = 25.0 mm ± 2.0 mm AMMOPACK REEL 500 mm (1)(2) REEL: H = 18.5 mm; Ø = 500 mm SPQ P = 12.7 mm SPQ SPQ 0 H = 18.5 mm; P0 = 12.7 mm Pitch = 15.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.0068 61682 63682 65682 68202 0.0082 61822 63822 65822 68203 61103 63103 65103 68204 61123 63123 61153 63153 65153 68206 61183 63183 65183 68207 0.01 5.0 x 11.0 x 17.5 1 0.012 0.015 0.018 6.0 x 12.0 x 17.5 1.4 1000 65123 1000 1100 68205 900 Pitch = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.022 0.027 0.033 0.039 0.047 7.0 x 13.5 x 17.5 1.8 8.5 x 15.0 x 17.5 2.4 10.0 x 16.5 x 17.5 3 61223 63223 61273 63273 61333 63333 61393 63393 61473 63473 65223 750 65273 68208 500 65333 500 65393 65473 68209 68211 450 68212 68213 800 650 600 Pitch = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.047 0.056 0.068 0.082 0.1 0.12 0.15 7.0 x 16.5 x 26.0 8.5 x 18.0 x 26.0 2.9 3.8 10.0 x 19.5 x 26.0 6.8 12.0 x 22.0 x 26.0 7.8 68173 68175 68177 68174 68176 68178 61683 63683 61823 63823 200 65823 61104 63104 65104 61124 63124 61154 63154 150 250 65683 65124 65154 200 200 Pitch = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.18 13.0 x 23.0 x 31.0 9.2 61184 63184 0.22 15.0 x 25.0 x 31.0 12.3 61224 63224 18.0 x 28.0 x 31.0 16.1 61274 63274 61334 63334 21.0 x 31.0 x 31.0 20.3 61394 63394 61474 63474 0.27 0.33 0.39 0.47 65184 100 65224 65274 65334 50 65394 65474 125 100 75 Notes • SPQ = Standard Packing Quantity (1) H = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to “Packaging Information” (2) Reel diameter = 365 mm is available on request (3) Weight for short lead product only www.vishay.com 370 For technical questions, contact: [email protected] Document Number: 28114 Revision: 22-Dec-10 MKP338 6 Y2 Interference Suppression Film Capacitors MKP Radial Potted Type Vishay BCcomponents Bent back pitch 7.5 mm CATALOG NUMBER BFC2 338 6X XXX AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS wxhxl (mm) MASS (g) (1) Short leads lt = 3.5 mm + 1 mm/ - 0.5 mm lt = 5.0 mm ± 1.0 mm Long leads SPQ lt = 25.0 mm SPQ ± 2.0 mm AMMOPACK H = 16 mm; P0 = 15 mm SPQ REEL 500 mm (1)(2) REEL: Ø = 500 mm H = 16 mm; P0 = 15 mm SPQ Original pitch = 10.0 mm; bent back pitch = 7.5 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.001 68539 68472 0.0012 68541 68473 0.0015 68542 68474 0.0018 0.0022 4.0 x 12.0 x 12.5 68543 0.6 68544 1300 68475 0.0027 68545 68477 0.0033 68546 68478 0.0039 68547 68479 0.0047 0.0056 5.0 x 13.0 x 12.5 68548 1.1 68549 1000 2000 68476 68196 68197 1900 Original pitch = 15.0 mm; bent back pitch = 7.5 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.0068 0.0082 0.01 67682 5.0 x 13.0 x 17.5 67822 1.0 67103 67123 0.012 0.015 0.018 950 6.0 x 14.0 x 17.5 67153 1.4 67183 800 Original pitch = 15.0 mm; bent back pitch = 7.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.022 0.027 0.033 0.039 0.047 7.0 x 15.5 x 17.5 1.8 8.5 x 17.0 x 17.5 2.4 10.0 x 18.5 x 17.5 3.0 67223 67273 67333 700 550 67393 500 67473 Notes • SPQ = Standard Packing Quantity (1) H = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to “Packaging Information” (2) Reel diameter = 365 mm is available on request (3) Weight for short lead product only Document Number: 28114 Revision: 22-Dec-10 For technical questions, contact: [email protected] www.vishay.com 371 MKP338 6 Y2 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type URAC = 300 V; C-tol = 5 % (URDC = 1000 V) CATALOG NUMBER BFC2 338 6X XXX AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS wxhxl (mm) REEL 500 mm (1)(2) AMMOPACK Short leads MASS (g) (1) lt = 3.5 mm + 1 mm/ - 0.5 mm lt = 5.0 mm ± 1.0 mm Long leads SPQ lt = 25.0 mm ± 2.0 mm SPQ H = 18.5 mm; P0 = 12.7 mm SPQ REEL: Ø = 500 mm H = 18.5 mm; P0 = 12.7 mm SPQ Pitch = 7.5 mm ± 0.4 mm; dt = 0.50 mm ± 0.05 mm 0.001 68215 68225 68216 68226 68217 68227 0.0018 68218 68228 68238 68338 68349 0.0022 68219 68229 68239 68339 68351 0.0012 0.0015 0.0027 0.0033 0.0039 0.0047 4.0 x 9.0 x 10.0 0.4 5.0 x 10.5 x 10.0 0.4 6.0 x 11.5 x 10.0 0.8 68221 68231 68222 68232 68223 68233 68224 68234 68235 68335 68236 1500 1000 750 68237 68241 68242 68243 68244 68346 68336 1000 1250 1000 68337 68341 68342 68343 68344 68347 1250 1000 750 68348 68352 68353 68354 68355 2500 2000 1900 Pitch = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.001 68481 68489 68498 68507 0.0012 68482 68491 68499 68508 0.0015 68483 68492 68501 68509 68484 68493 68485 68494 0.0027 68486 68495 68504 68513 0.0033 68487 68496 68505 68514 0.0039 68488 68497 68506 68515 0.0047 68245 68249 68254 68357 68246 68251 68247 68252 68248 68253 0.0018 0.0022 0.0056 0.0068 0.0082 4.0 x 10.0 x 12.5 0.6 5.0 x 11.0 x 12.5 0.82 6.0 x 12.0 x 12.5 1.1 1000 1000 750 68502 68503 68255 68256 68257 1250 1000 750 68511 68512 68358 68359 68361 1400 1100 900 Notes • SPQ = Standard Packing Quantity (1) H = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to “Packaging Information” (2) Reel diameter = 365 mm is available on request (3) Weight for short lead product only www.vishay.com 372 For technical questions, contact: [email protected] Document Number: 28114 Revision: 22-Dec-10 MKP338 6 Y2 Interference Suppression Film Capacitors MKP Radial Potted Type Vishay BCcomponents URAC = 300 V; C-tol = 5 % (URDC = 1000 V) CATALOG NUMBER BFC2 338 6X XXX AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS wxhxl (mm) AMMOPACK Short leads MASS (g) (1) lt = 3.5 mm + 1 mm/ - 0.5 mm lt = 5.0 mm ± 1.0 mm Long leads SPQ lt = 25.0 mm ± 2.0 mm SPQ H = 18.5 mm; P0 = 12.7 mm SPQ REEL 500 mm (1)(2) REEL: Ø = 500 mm H = 18.5 mm; P0 = 12.7 mm SPQ Pitch = 15.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.0068 0.0082 5.0 x 11.0 x 17.5 1.0 0.01 0.012 0.015 6.0 x 12.0 x 17.5 1.4 68258 68284 68309 68381 68259 68285 68311 68382 68261 68286 68262 68287 68313 68384 68263 68288 68314 68385 68264 68289 68315 68386 68265 68291 68266 68292 68267 68293 68268 68294 1000 68312 1000 1100 68383 900 Pitch = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.018 0.022 0.027 0.033 0.039 7.0 x 13.5 x 17.5 1.8 8.5 x 15.0 x 17.5 2.4 10.0 x 16.5 x 17.5 3.0 750 68316 68317 500 68318 500 68319 68387 68388 68389 450 68391 800 650 600 Pitch = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.047 0.056 0.068 0.082 0.1 0.12 7.0 x 16.5 x 26.0 2.9 8.5 x 18.0 x 26.0 3.8 10.0 x 19.5 x 26.0 6.8 12.0 x 22.0 x 26.0 7.8 68269 68295 68271 68296 68272 68297 68273 68298 68274 68299 68275 68301 68321 200 68322 250 68323 68324 150 68325 200 68326 Pitch = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.15 0.18 0.22 0.27 0.33 0.39 13.0 x 23.0 x 31.0 9.2 15.0 x 25.0 x 31.5 12.3 18.0 x 28.0 x 31.5 16.1 21.0 x 31.0 x 31.0 20.3 68276 68302 68277 68303 68278 68304 68327 68328 100 68279 68305 68331 68281 68306 68332 68282 68307 50 125 68329 68333 100 75 Notes • SPQ = Standard Packing Quantity (1) H = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to “Packaging Information” (2) Reel diameter = 365 mm is available on request (3) Weight for short lead product only Document Number: 28114 Revision: 22-Dec-10 For technical questions, contact: [email protected] www.vishay.com 373 MKP338 6 Y2 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type Bent back pitch = 7.5 mm CATALOG NUMBER BFC2 338 6X XXX AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS wxhxl (mm) REEL 500 mm (1)(2) AMMOPACK MASS (g) (1) Short leads lt = 3.5 mm + 1 mm/ - 0.5 mm lt = 5.0 mm ± 1.0 mm Long leads SPQ lt = 25.0 mm ± 2.0 mm SPQ H = 16 mm; P0 = 15 mm SPQ REEL: Ø = 500 mm H = 16 mm; P0 = 15 mm SPQ Original pitch = 10.0 mm; bent back pitch = 7.5 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.001 68553 68516 0.0012 68554 68517 0.0015 68555 68518 0.0018 68556 0.0022 4.0 x 12.0 x 12.5 0.6 68557 1300 68519 68521 0.0027 68558 68522 0.0033 68559 68523 0.0039 68561 68524 0.0047 68562 0.0056 5.0 x 13.0 x 12.5 0.82 68563 1000 68363 68364 2000 1900 Original pitch = 15.0 mm; bent back pitch = 7.5 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.0068 0.0082 68368 5.0 x 13.0 x 17.5 1.1 68369 0.01 0.012 0.015 950 68371 6.0 x 14.0 x 17.5 68372 1.4 68373 800 Original pitch = 15.0 mm; bent back pitch = 7.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.018 0.022 0.027 0.033 0.039 7.0 x 15.5 x 17.5 1.8 8.5 x 17.0 x 17.5 2.4 10.0 x 18.5 x 17.5 3 68374 68375 68376 68377 68378 700 550 500 Notes • SPQ = Standard Packing Quantity (1) H = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to “Packaging Information” (2) Reel diameter = 365 mm is available on request (3) Weight for short lead product only www.vishay.com 374 For technical questions, contact: [email protected] Document Number: 28114 Revision: 22-Dec-10 MKP338 6 Y2 Interference Suppression Film Capacitors MKP Radial Potted Type Vishay BCcomponents APPROVALS SAFETY APPROVALS Y2 VOLTAGE VALUE FILE NUMBERS EN 60384-14 (ENEC) 300 VAC 1 nF to 470 nF FI 2008062 A1 (= IEC 60384-14 ed-3) UL1414 and CSA-C22.2 No 1 250 VAC 1 nF to 470 nF E112471 antenna coupling 1 nF to 470 nF E109565 UL1283 300 VAC 1 nF to 470 nF 1377022 CSA-E384-14-95 300 VAC 300 VAC CB-Test Certificate 1 nF to 470 nF FI 5265 A1 The Enec-approval together with the CB-Certificate replace all national marks of the following countries (they have already signed the ENEC-Agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg; Netherlands; Norway; Portugal; Slovenian; Spain; Switzerland and United Kingdom. ® 16 MOUNTING Normal Use The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting in printed circuit boards by means of automatic insertion machines. For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139 Specific Method of Mounting to Withstand Vibration and Shock In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board: • For pitches ≤ 15 mm capacitors shall be mechanically fixed by the leads • For larger pitches the capacitors shall be mounted in the same way and the body clamped Space Requirements on Printed-Circuit Board The maximum space for length (Imax.), width (wmax.), and height (hmax.) of film capacitors to take in account on the printed-circuit board is shown in the drawings: • For products with pitch ≤ 15 mm, Δw = Δl = 0.3 mm; Δh = 0.1 mm • For products with 15 mm < pitch, ≤ 27.5 mm, Δw = Δl = 0.5 mm; Δh = 0.1 mm Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. wmax. = W + Δ Eccentricity Imax. = I + Δ CBA116 hmax. = h + Δ Seating plane SOLDERING CONDITIONS For general soldering conditions and wave soldering profile, we refer to the application note: “Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171 Storage Temperature • Storage temperature: Tstg = - 25 °C to + 40 °C with RH maximum 80 % without condensation Ratings and Characteristics Reference Conditions Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %. For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. Document Number: 28114 Revision: 22-Dec-10 For technical questions, contact: [email protected] www.vishay.com 375 MKP338 6 Y2 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type CHARACTERISTICS Capacitance as a function of ambient temperature (typical curve) Tangent of loss angle as a function of frequency (typical curve) 103 2 Dissipation factor (x 10-4) ΔC/C (%) 4 typical 102 0 nF 20 > 2 nF C 20 2 C≤ F < 47 n F n ≤ 47 nF < C 0 nF 1 10 C≤ max. -2 101 -4 min. -6 0 - 50 100 50 Tamb (°C) 102 103 104 f (Hz) 105 Resonant frequency as a function of capacitance (typical curve) Impedance as a function of frequency (typical curve) 102 3 10 f (MHz) 1n 4.7 F nF 10 nF 102 Impedance (Ω) 100 1 10 101 47 nF 10 0n F 47 0n F 1 10 Y2 100 0 10 10-1 10-1 10-2 104 105 106 107 f (Hz) 108 1 Max. RMS voltage as a function of frequency 10 100 1000 C (nF) 10 000 Max. RMS current as a function of frequency 103 AC voltage (V) AC current (mA) 103 470 nF 102 100 nF 47 nF 102 101 10 nF 4.7 nF 100 Tamb ≤ 105 °C 101 101 102 www.vishay.com 376 103 104 f (Hz) 105 10-1 101 For technical questions, contact: [email protected] 1nF Tamb ≤ 105 °C 102 103 104 f (Hz) 105 Document Number: 28114 Revision: 22-Dec-10 MKP338 6 Y2 Interference Suppression Film Capacitors MKP Radial Potted Type Vishay BCcomponents Insulation resistance as a function of ambient temperature RC (s) 106 105 104 0 20 40 60 80 100 Tamb (°C) APPLICATION NOTES • For X2 electromagnetic interference suppression in standard across the line application (50 Hz/60 Hz) with a maximum mains voltage of 310 VAC • For series impedance applications we refer to the “Application Note”: www.vishay.com/doc?28153 • For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For information depending of the capacitance value and the number of parallel connections contact: [email protected] • These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse program must be used. • The maximum ambient temperature must not exceed 110 °C (125 °C for less than 1000 h) for C ≤ 470 nF and 110 °C for C > 470 nF. • Rated voltage pulse slope: If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 435 VDC and divided by the applied voltage. Document Number: 28114 Revision: 22-Dec-10 For technical questions, contact: [email protected] www.vishay.com 377 MKP338 6 Y2 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type INSPECTION REQUIREMENTS General Notes: 1. Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-14 ed-3 and Specific Reference Data”. Group C Inspection Requirements SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.1 Dimensions (detail) As specified in chapters “General Data” of this specification Initial measurements Capacitance Tangent of loss angle: at 10 kHz 4.3 Robustness of terminations Tensile: load 10 N; 10 s Bending: load 5 N; 4 x 90° 4.4 Resistance to soldering heat No pre-drying Method: 1A Solder bath: 280 °C ± 5 °C Duration: 10 s 4.19 Component solvent resistance Isopropylalcohol at room temperature Method: 2 Immersion time: 5 min ± 0.5 min Recovery time: Min. 1 h, max. 2 h 4.4.2 Final measurements Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 5 % of the value measured initially Tangent of loss angle Increase of tan δ ≤ 0.008 Compared to values measured initially Insulation resistance As specified in section “Insulation Resistance” of this specification www.vishay.com 378 For technical questions, contact: [email protected] No visible damage Document Number: 28114 Revision: 22-Dec-10 MKP338 6 Y2 Interference Suppression Film Capacitors MKP Radial Potted Type SUB-CLAUSE NUMBER AND TEST CONDITIONS Vishay BCcomponents PERFORMANCE REQUIREMENTS SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C1 Initial measurements Capacitance Tangent of loss angle: at 10 kHz 4.20 Solvent resistance of the marking: Isopropylalcohol at room temperature Method: 1 Rubbing material: cotton wool Immersion time: 5 min ± 0.5 min 4.6 Rapid change of temperature θA = - 55 °C θB = + 105 °C 5 cycles Duration t = 30 min 4.6.1 4.7 Inspection Vibration Visual examination Mounting: see Section “Mounting” of this specification Procedure B4: Frequency range: 10 Hz to 55 Hz Amplitude: 0.75 mm or Acceleration 98 m/s² (whichever is less severe) Total duration 6 h No visible damage 4.7.2 Final inspection Visual examination No visible damage 4.9 Shock Mounting: see Section “Mounting” for more information Pulse shape: half sine Acceleration: 490 m/s² Duration of pulse: 11 ms 4.9.2 Final measurements Visual examination No visible damage Capacitance |ΔC/C| ≤ 5 % of the value measured initially Tangent of loss angle Increase of tan δ ≤ 0.008 Compared to values measured initially Insulation resistance As specified in section “Insulation Resistance” of this specification Document Number: 28114 Revision: 22-Dec-10 No visible damage Legible marking For technical questions, contact: [email protected] www.vishay.com 379 MKP338 6 Y2 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AND C1B 4.11 Climatic sequence 4.11.1 Initial measurements Capacitance Measured in 4.4.2 and 4.9.2 Tangent of loss angle: Measured initially in C1A and C1B 4.11.2 Dry heat Temperature: 105 °C Duration: 16 h 4.11.3 Damp heat cyclic Test Db First cycle 4.11.4 Cold Temperature: - 55 °C Duration: 2 h 4.11.5 Damp heat cyclic Test Db remaining cycles 4.11.6 Final measurements Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 5 % of the value measured in 4.11.1. Tangent of loss angle Increase of tan δ ≤ 0.008 Compared to values measured in 4.11.1 Voltage proof 2250 VDC; 1 min between terminations No permanent breakdown or flash-over Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification SUB-GROUP C2 4.12 Damp heat steady state 56 days, 40 °C, 90 % to 95 % RH, no load Capacitance 4.12.1 Initial measurements Tangent of loss angle at 1 kHz 4.12.3 Final measurements Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 5 % of the value measured in 4.12.1. Tangent of loss angle Increase of tan δ ≤ 0.007 Compared to values measured in 4.12.1. Voltage proof 2250 VDC; 1 min between terminations No permanent breakdown or flash-over Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification www.vishay.com 380 For technical questions, contact: [email protected] Document Number: 28114 Revision: 22-Dec-10 MKP338 6 Y2 Interference Suppression Film Capacitors MKP Radial Potted Type SUB-CLAUSE NUMBER AND TEST CONDITIONS Vishay BCcomponents PERFORMANCE REQUIREMENTS SUB-GROUP C3 4.13.1 Initial measurements Capacitance Tangent of loss angle: at 10 kHz 4.13 Impulse voltage 3 successive impulses, full wave, peak voltage: X1: 5 kV Max. 24 pulses 4.14 Endurance Duration: 1000 h 1.7 x URAC at 105 °C Once in every hour the voltage is increased to 1000 VRMS for 0.1 s via resistor of 47 Ω ± 5 % 4.14.7 Final measurements No selfhealing breakdowns or flash-over Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 10 % compared to values measured in 4.13.1. Tangent of loss angle Increase of tan δ ≤ 0.008 Compared to values measured in 4.13.1. Voltage proof 2250 VDC; 1 min between terminations 2100 VAC; 1 min between terminations and case No permanent breakdown or flash-over Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification SUB-GROUP C4 4.15 Charge and discharge 10 000 cycles charged to 420 VDC Discharge resistance: 420 Vdc R = --------------------------------------1.5 x C (dU/dt) 4.15.1 Initial measurements Capacitance Tangent of loss angle: at 10 kHz 4.15.3 Final measurements Capacitance |ΔC/C| ≤ 10 % compared to values measured in 4.15.1. Tangent of loss angle Increase of tan δ ≤ 0.008 Compared to values measured in 4.15.1. Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification Document Number: 28114 Revision: 22-Dec-10 For technical questions, contact: [email protected] www.vishay.com 381 MKP338 6 Y2 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS Resonance frequency ≥ 0.9 times the value as specified in section “Resonant Frequency” of this specification SUB-GROUP C5 4.16 Radio frequency characteristic SUB-GROUP C6 4.17 Passive flammability Class B Bore of gas jet: Ø 0.5 mm Fuel: butane Test duration for actual volume V in mm3: V ≤ 250: 10 s After removing test flame from capacitor, the capacitor must not continue to burn for more than 10 s. No burning particle must drop from the sample. 250 < V ≤ 500: 20 s 500 < V ≤ 1750: 30 s V > 1750: 60 s One flame application 12 mm ~ 8 mm 45.0 ° SUB-GROUP C7 4.18 Active flammability www.vishay.com 382 20 cycles of 5 kV discharges on the test capacitor connected to URAC For technical questions, contact: [email protected] The cheese cloth around the capacitors shall not burn with a flame. No electrical measurements are required. Document Number: 28114 Revision: 22-Dec-10 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000