SEMICONDUCTOR TECHNICAL DATA The MC100LVEL30 is a triple master–slave D flip flop with differential outputs. The MC100EL30 is pin and functionally equivalent to the MC100LVEL30 but is specified for operation at the standard 100E ECL voltage supply. Data enters the master latch when the clock input is LOW and transfers to the slave upon a positive transition on the clock input. In addition to a common Set input individual Reset inputs are provided for each flip flop. Both the Set and Reset inputs function asynchronous and overriding with respect to the clock inputs. • • • • • • • 20 1 1200MHz Minimum Toggle Frequency DW SUFFIX PLASTIC SOIC PACKAGE CASE 751D–04 20–Lead SOIC Packaging 550ps Typical Propagation Delays Set and Reset Inputs Supports both Standard and Low Voltage 100K ECL Internal Input Pulldown Resistors >2000V ESD Protection Logic Diagram and Pinout: 20-Lead SOIC (Top View) VCC Q0 Q0 VCC Q1 Q1 VCC Q2 Q2 VEE 20 19 18 17 16 15 14 13 12 11 Q Q Q Q Q Q S R S D R S D R TRUTH TABLE R S D CLK Q Q L L H L H L L L H H L H X X X Z Z X X X L H L H Undef H L H L Undef D Z = LOW to HIGH Transition PIN NAMES 1 2 3 4 5 6 7 8 S012 D0 CLK0 R0 D1 CLK1 R1 D2 9 10 CLK2 R2 Pins Function D0–D2 R0–R2 CLK0–CLK2 S012 Data Inputs Reset Inputs Clock Inputs Common Set Input 5/96 Motorola, Inc. 1996 4–1 REV 2 MC100LVEL30 MC100EL30 MC100LVEL30 DC CHARACTERISTICS (VEE = –3.0V to –3.8V; VCC = GND) –40°C Symbol Characteristic Min IEE Power Supply Current IIH Input HIGH Current 0°C Typ Max 55 62 Min 25°C Typ Max 55 62 150 Min 85°C Typ Max 55 62 150 Min Typ Max Unit 55 64 mA 150 µA Max Unit 150 MC100LVEL30 AC CHARACTERISTICS (VEE = –3.0V to –3.8V; VCC = GND) –40°C Symbol Characteristic Min Typ 0°C Max 1.0 Min Typ 25°C Max Typ Max Typ Maximum Toggle Frequency tPLH tPHL Propagation Delay to Output tS tH Setup Time Hold Time 150 200 0 100 150 200 0 100 150 200 0 100 150 200 0 100 ps tRR Set/Reset Recovery 400 200 400 200 400 200 400 200 ps tPW Minimum Pulse Width CLK Set, Reset 400 650 tr tf Output Rise/Fall Times Q (20% – 80%) 460 470 690 710 1.2 Min fMAX CLK S, R 1.2 Min 85°C 470 480 700 720 1.2 480 490 710 730 GHz 500 515 730 755 ps ps 400 650 280 550 400 650 280 550 400 650 280 550 280 550 ps Typ Max Unit 55 64 mA 150 µA Max Unit MC100EL30 DC CHARACTERISTICS (VEE = –4.2V to –5.5V; VCC = GND) –40°C Symbol Characteristic Min IEE Power Supply Current IIH Input HIGH Current 0°C Typ Max 55 62 Min 25°C Typ Max 55 62 150 Min 85°C Typ Max 55 62 150 Min 150 MC100EL30 AC CHARACTERISTICS (VEE = –4.2V to –5.5V; VCC = GND) –40°C Symbol Characteristic Min Typ 0°C Max Typ Max Typ Max Typ tPLH tPHL Propagation Delay to Output tS tH Setup Time Hold Time 150 200 0 100 150 200 0 100 150 200 0 100 150 200 0 100 ps tRR Set/Reset Recovery 400 200 400 200 400 200 400 200 ps tPW Minimum Pulse Width CLK Set, Reset 400 650 tr tf Output Rise/Fall Times Q (20% – 80%) 460 470 690 710 1.2 Min Maximum Toggle Frequency CLK S, R 1.2 Min 85°C fMAX MOTOROLA 1.0 Min 25°C 470 480 700 720 1.2 480 490 710 730 GHz 500 515 730 755 ps ps 280 400 650 550 400 650 280 550 4–2 280 400 650 550 280 550 ps ECLinPS and ECLinPS Lite DL140 — Rev 3 MC100LVEL30 MC100EL30 OUTLINE DIMENSIONS DW SUFFIX PLASTIC SOIC PACKAGE CASE 751D–04 ISSUE E –A – 20 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.150 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.13 (0.005) TOTAL IN EXCESS OF D DIMENSION AT MAXIMUM MATERIAL CONDITION. 11 1 –B – P 10 PL A B 0.010 (0.25) M B M 10 D 20 PL 0.010 (0.25) J M T S S F R X 45° C –T G K 18 PL SEATING – PLANE M DIM A B C D F G J K M P R MILLIMETERS MIN MAX 12.65 12.95 7.40 7.60 2.35 2.65 0.35 0.49 0.50 0.90 1.27 BSC 0.25 0.32 0.10 0.25 0° 7° 10.05 10.55 0.25 0.75 INCHES MIN MAX 0.499 0.510 0.292 0.299 0.093 0.104 0.014 0.019 0.020 0.035 0.050 BSC 0.010 0.012 0.004 0.009 0° 7° 0.395 0.415 0.010 0.029 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 or 602–303–5454 JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–81–3521–8315 MFAX: [email protected] – TOUCHTONE 602–244–6609 INTERNET: http://Design–NET.com ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 ◊ ECLinPS and ECLinPS Lite DL140 — Rev 3 4–3 *MC100LVEL30/D* MC100LVEL30/D MOTOROLA