PANELVIEW D99-6F5E2P1B3M0 Enhancing the Vision AMLCD PRODUCT - MODEL LC056 Ruggedized 5.6" Display Head Assembly with Backlight (320 x 234) OVERVEIW White Electronic Designs' 5.6" sunlight readable display head assembly with backlight is ruggedized for harsh environments. Off-the-shelf AMLCD technology combined with proven ruggedization techniques provides a cost-effective, multifunctional display assembly for commercial, industrial, and military applications. Our unique patented SBLR (Super Bright Low Reflectance) technology provides optimal readability even in bright sunlight. INVERTER ASSY 5.6" LCD MOUNTING PLATE 5.6" LCD GLASS STACK BACKLIGHT HOUSING ASSY 5.6" TFT Color Active Matrix LCD ENVIRONMENTAL CHARACTERISTICS Landscape Mode ■ Temperature: 4:3 Aspect Ratio ±55°(H); +35°/-55°(V) Viewing Angle @ 5:1 C/R 1/4 VGA 320 x 234 Resolution Accepts 2 Channels RGB Analog Input Operating: -40°C to +85°C Non Operational: -40°C to +85°C Accepts NTSC Composite Video INTERFACE CHARACTERISTICS Accepts S-Video (Y/C) Driver Signal Compatibility Anti-reflectiveSBLRTechnology Accepts RGB Analog using NTSC or PAL timing High Bright/Long Life Backlight Accepts External Dot Clock 1000:1 Wide Dimming Range Accepts Discrete and Composite Sync Signals LCD PANEL SPECIFICATIONS Parameter Specification Units Panel Dimensions Screen Size Active Viewing Area Display Format Viewing Orientation Dot Pitch Pixel Configuration Display Mode 126(H) x 96.3(V) 140 mm (5.6" diag.) 114.2(H) x 83.5(V) 320 x RGB x 234 6 O'clock 0.119(H) x 0.357(V) RGB Vertical Stripe Normally White mm mm mm pixels mm Note: This data sheet is subject to change or cancellation without notice. 1 Panelview (503) 690-2460 www.panelview.com Panelview is a subsidiary of White Electronic Designs Corporation PANELVIEW D99-6F5E2P1B3M0 Enhancing the Vision FIG. 1 DISPLAY HEAD ASSEMBLY BLOCK DIAGRAM Video Interface Video RGB - 1 RGB - 2 Power/Ground Composite Video Pin# 1) VB2 2) GND 3) VR2 4) VG2 5) VB1 6) VSL 7) VR1 8) VG1 9) VBS 10) CRM 11) CLKC 12) VSH 13) VSW 14) GND 15) SAM 16) VMS 17) CLK 18) N/P 19) HSY 20) VSY Active Area 5.6 diagonal 320(H)xRGBx234(V) Light Backlight Controller Power/Ground Lum. Control (0 - 5V) External Shutdown Pin# 1) +28V_RTN 2) EXTSHDW 3) +CONTROL 4) +CONTROL_RTN 5) +28V 6) Open 7) LAMPMNT 8) Open 9) +12 V 10) +12V_RTN Panelview Hillsboro, OR (503) 690-2460 Panelview is a subsidiary of White Electronic Designs Corporation 2 Lamp Assembly Lamp Maintenance Bit PANELVIEW D99-6F5E2P1B3M0 Enhancing the Vision FIG. 2 MECHANICAL OUTLINE DIMENSIONS FRONT VIEW 5.16 LCD MOUNTING PLATE 4.96 GLASS 4.49 ACTIVE VIEWING AREA 2.24 .32 .35 .50 1.64 3.79 GLASS 3.28 ACTIVE VIEWING AREA 4.70 SIDE VIEW ALL DIMENSIONS ARE IN INCHES 3 Panelview (503) 690-2460 www.panelview.com Panelview is a subsidiary of White Electronic Designs Corporation PANELVIEW D99-6F5E2P1B3M0 Enhancing the Vision SPECIFICATION noise. The luminance output versus input voltage response is non-linear to provide easy adjustments at low luminance. This is the specification for the high performance Backlight System that is used to illuminate a 5.6inch AMLCD display head. INPUT SIGNALS The backlight is a closed loop luminance sensed system. A sensor monitors the bulb's luminance output and compares it with the control voltage to regulate output. The luminance is maintained over time and temperature variations. +12V, +12V_RTN : Power and Return for lamp and control circuitry Tolerance: ± 5.0% Noise & Ripple: 150mvr-p Current Cap: 1.4 Amps max Recommended Cabling: #24 AWG Twisted Our multi-bulb system offers built-in redundancy for continued lighting in the event of single bulb failure. For lowtemperature operation, a built-in lamp heater assembly maintains bulb temperature at its optimum level. External shutdown of the heater and lamp power are controlled via an external input. When lamp replacement is required, an output pin signals low. +28V, +28V_RTN : Power and Return for heater Tolerance: Noise & Ripple: CurrentCap: RecommendedCabling: External voltage input is a differential input that provides common mode rejection of common mode +CONTROL, +CONTROL_RTN : 0 to 5V Input for luminance control voltage SIGNAL DEFINITION Pin 1 2 3 4 5 6 7 8 9 10 +/-5% 150mvr-p 1.0Ampmax #24AWGTwisted ControlVoltage: Noise & Ripple: CurrentCap: RecommendedCabling: Signal Acronym +28V_RTN Input/ Description Output Input Backlight heater return Input signal used to shutdown the lamp and EXTSHDW Input heater power, the control circuitry will still be powered. Positive side of the differential voltage control +CONTROL Input for the backlight. Negative side of the differential voltage control +CONTROL_RTN Input for the backlight. (Normally Grounded) +28V Input This is the power for the internal backlight heater. Not Used LAMPMNT Output Output signal to indicate the lamps need replacement. Not Used Input Shield of the control voltage cable. +12V Input +12 volt power used for the backlight circuitry. +12V_RTN Input +12 volt return 0 to +5 V <10mVp-p 1mA #24AWGTwisted LUMINANCE Luminance Range: Low: 0.1fl max High: 100fl min Control Voltage: 0.000 to 5.000 Volts (The adjustment range is monotonic with 8 BIT resolution.) Uniformity: 30% measured at 5 spots Note: All measurements @ 25°C. Pin9 Pin1 Dupont/Berg Part Number 69168-110 * Looking at component side of PCB. Pin2 Pin10 Panelview Hillsboro, OR (503) 690-2460 Panelview is a subsidiary of White Electronic Designs Corporation 4 PANELVIEW D99-6F5E2P1B3M0 Enhancing the Vision VIDEO INTERFACE SPECIFICATIONS SIGNAL PARAMETERS Parameter Symbol Min Typ Max Units frequencyNTSC fh(N) 15.13 15.73 16.33 kHz frequencyPAL fh(P) 15.03 15.63 16.23 kHz 5.2 µs Horizontal Sync pulsewidthNTSC tv(N) 4.2 4.7 Input CLKC = HI pulse width PAL tv(P) 4.2 4.7 5.2 µs rise time trv1 0.5 µs fall time tfv1 0.5 µs frequencyNTSC fh(N) fh/284 fh/262 fh/258 Hz frequencyPAL fh(P) fh/344 fh/312 fh/304 Hz Vertical Sync pulsewidthNTSC tv(N) 3h µs Input CLKC = HI pulse width PAL tv(P) 2.5h µs rise time trv1 0.5 µs fall time tfv1 0.5 µs SAM=LO frequency fc fcli 6.0 6.8 7.6 MHz SAM=HI frequency fc fcli 18.2 18.9 20 MHz Clock Input HI width twh 20.0 ns Input CLKC = LO LO width twl 20.0 ns rise time trcl1 5.0 ns fall time tfcl1 5.0 ns SAM=HI frequency fhi fcli/1230 15.73 16.33 MHz SAM=LO frequency fhi fcli/465 MHz Horizontal Sync pulse width thi 1.0 4.7 5.2 µs Input CLKC = LO rise time trhi 0.05 µs fall time tfhi 0.05 µs frequency VSY fh/284 fh/262 fh/258 Hz Vertical Sync pulse width 1h 3h 5h µs Input CLKC = LO rise time 0.5 µs fall time 0.5 µs Data set up time CLK 25 ns Data hold time note 1 25 ns Data set up time CLK 1 µs Data hold time note 2 1 µs NOTES: 1. In the case where CLKC = HI, this shows the phase difference from HSY to CLK. In that case HSY will be taken at the rise timing of CLK 2. In the case where CLKC = HI, this shows the phase difference from VSY to HSY. In that case VSY will be taken at the rise timing of HSY FEATURES ■ DualModeNTSC(M)andPALFTimingforRGBVideoand NTSCTimingforCompositeVideo ■ Supports Two Sets of Analog RGB Video Signals ■ NTSCCompositeorS-VideoSignals ■ DisplayResolution320x234(NTSC)and320x273(PAL) ■ ScanReversal ■ ExternalClockMode ABSOLUTE MAXIMUM RATINGS Supply Voltage (VSH to GND) Supply Voltage (VSL to GND) Analog Input (VA) Digital Input (VD) Power Consumption (w/panel) Power Dissipation +15V -15V -0.3 to +2.0V -0.3 to VS to +0.3V +12 @ 0.160 mA (max) -12 @ 0.050 mA (max) 3.0 Watt (max) POWER INPUT SPECIFICATIONS Parameter Symbol Positive Input Voltage VS Negative Input Voltage VSL Analog Input Voltage VAH Digital Input Voltage (High) VDH Digital Input Voltage (Low) VDL Min 10.5 -8.0 0.7 3.7 0 Typ 12.0 -12.0 0.74 --- Max 13.0 -13.0 1.0 5.1 1.0 Units VDC VDC Vp-p VDC VDC PHYSICAL SPECIFICATIONS 1.6" TIMING WAVEFORM 4.6" tC tCH 0.275" tCL Clock 0.062" Clock Horiz. Sync. tHP tH Horiz. Sync. Vert. Sync. tVP tV 5 Panelview (503) 690-2460 www.panelview.com Panelview is a subsidiary of White Electronic Designs Corporation PANELVIEW D99-6F5E2P1B3M0 Enhancing the Vision CONNECTOR TYPE SIGNAL DEFINITION Pin Symbol 1 2 3 4 5 6 7 8 9 10 VB2 GND VR2 VG2 VB1 VSL VR1 VG1 VBS CRM Input/ Output Input Input Input Input Input Input Input Input Input Input 11 12 13 CLKC VSH VSW Input Input Input 14 15 GND SAM Input Input 16 VMS Input 17 18 19 20 CLK N/P HSY VSY Input Input I/O I/O The replacement interface for the LQ6FW315 glass uses a 2mm 20 pin Molex right angle connector for the video, power, and clock inputs. This interface supports both NTSC Composite, S Video, and RGB depending on how the video select channels are biased (see chart). Description Video Signal - Blue Ground Video Signal - Red Video Signal - Green Video Signal - Blue Negative Power Supply Voltage (-12V) Video Signal - Red Video Signal - Green NTSC Video/Composite Sync (RS170 timing) Chrominance Signal for Y/C video Chrominance Input when VSW = L and Composite Video when H Clock Selection Positive Power Supply (+12V) Video Input Mode Select (See Chart) High = RGB1; Low = RGB2 Ground Sampling Order for RGB Low = Simultaneous, High = Independent Video Input Mode Select (See Chart) Low = Composite or Y/C Video; High = RGB Video Dot Clock RGB Display Modes (NTSC or PAL) Horizontal Sync. Low TTL Vertical Sync. Low TTL Pin 1 20 pin shrouded right angle Molex connector with 30µ" gold: P/N 87333-2021.Arrow denotes pin 1 (Note picture is not actual connector, for pin referenceonly). CLOCK SELECT Terminal HSY VSY CLK VIDEO SELECT Video Select RGB-1 RGB-2 NTSC S-video VSW High Low High Low Terminal VMS High High Low Low Panelview Hillsboro, OR (503) 690-2460 Panelview is a subsidiary of White Electronic Designs Corporation Pin 2 6 CLKC=H CLKC=L SAM=H SAM=L SAM=H SAM=L Output Output Input Input Output Output Input Input Output Output Input Input Low Dot Clock Pixel Clock Dot Clock PANELVIEW D99-6F5E2P1B3M0 Enhancing the Vision OPTICAL SPECIFICATIONS VIEWING ANGLE VIEWING ANGLE WithSBLRtechnology,ourwideviewingangle5.6"ruggedized unit can further improve the viewing area for applications where sunlight readability at extreme angles is critical. The contrast at the following angles shall maintain a ratio of 5:1 in dark ambient conditions. Left/Right: 55°/ 55° Top/Bottom: +35°/ -55° Image Reversal Contrast Ratio Wash Out 12 O Clock 35 5:1 C/R 12 O Clock 0 ¡ ¡ 6 O Clock Iso - CONTRAST Max C/R 6 O Clock 55 5:1 C/R Image Reversal 7 Panelview (503) 690-2460 www.panelview.com Panelview is a subsidiary of White Electronic Designs Corporation PANELVIEW D99-6F5E2P1B3M0 Enhancing the Vision OPTICAL CHARACTERISTICS @ 25 OC Parameter Response Time Condition Min Typ Max Units Electrically On Electrically Off On White 0 to 30 degrees ±45 degrees @ 8000 FC Horizontal Vertical 30 50 5.5 1.5 .15 0.119 0.357 60 100 2 0.2 ms ms % % % mm mm x y x y x y x y x y 0.612 0.343 0.302 0.596 0.156 0.172 0.337 0.397 0.298 0.364 Rise Decay Transmission Specular Reflectance Diffuse Reflectance Dot Pitch Chromaticity Coordinates(1) Red Green Blue White Black NOTE: 1. Chromaticy measured @ center of display and normal to display ENVIRONMENTAL SPECIFICATIONS: Operating Temperature: -40 0C to +85 0 C Storage Temperature: -40 0C to +85 0 C Altitude: 60,000 feet Shock: 20G, 11ms Vibration (endurance): 0.04 g 2 /Hz, 15Hz to 2000Hz, 8.91grms (operation): Humidity: .008 g 2/Hz, 15-30Hz, -8db/ OCT , 30-35Hz, 0.005 g 2 /Hz, 35-2000Hz, 3.16grms 95% RH @ t65C per Mil-Std-810E, Method 507.3 Procedure III-Aggravated Panelview Hillsboro, OR (503) 690-2460 Panelview is a subsidiary of White Electronic Designs Corporation 8