Tel : Fax : email : 0044 (0)118 979 1238 0044 (0)118 979 1283 [email protected] ACT HC49/U ( Custom Packages ) The ACT HC49U family is available in industry standard package and specifications. This series offers a broad range of frequencies and tolerances in both standard and industrial temperature ranges. Housed in resistance welded cases the HC49U now has improved aging characteristics. Various options - Gull Wing, Third Leg, Insulating Washers etc - are available on request Specification Parameter Symbol Specification Frequency Range fo Frequency Tolerance @25°C Temp Operating Range Stability over Temp Range °C Temp Storage Range Equivalent Series Resistance Shunt Capacitance Load Capacitance Drive Level Insulation Resistance Aging Δf/fo Τopr Δf/Fo Tstg ESR CO CL DL max IR Fa 1.00MHz ~ 200MHZ Fundamental & 3rd to 7th O/T ±5ppm ~ 100ppm (30ppm Std ) -10 ~ +60°C Std ±5ppm ~ 100ppm (50 ppm Std ) -40°C to +85°C See table below 7pF max 8 ~ 55pF or SR 50μ W typ 500MΩ Min @ DC 100V ±15V ±5ppm / year max@25°C Frequency (MHz) ESR (Ω) max 3000 1.000 Condition Please specify Please specify Others available - Please specify ±5ppm ~ 100ppm Dependent on cut & frequency Please specify Others available - Please specify @ DC 100V ±15V Others available - Please specify ESR (Ω) Mode Mode Frequency (MHz) SL Fund 12.000 ~ 13.999 40 AT Fund 1.8432 ~ 1.999 650 AT Fund 14.000 ~ 16.999 30 AT Fund 2.000 ~ 2.999 550 AT Fund 17.000 ~24.999 30 AT Fund 3.000 ~ 3.199 300 AT Fund 25.000 ~ 35.999 30 AT Fund 3.200 ~ 3.499 300 AT Fund 36.000 ~ 45.000 25 AT Fund 3.500 ~ 4.999 120 AT Fund 20.000 ~ 45.000 40 BT Fund 5.000 ~ 5.999 70 AT Fund 20.000 ~ 59.999 60 3rd OT 6.000 ~ 7.999 60 AT Fund 60.000 ~ 100.00 80 3rd OT 8.000 ~ 9.999 50 AT Fund 60.000 ~ 150.00 120 5th OT 10.00 ~ 11.999 40 AT Fund 120.00 ~ 200.00 150 7th OT Please note that all parameters can not necessarily be specified in the same device Customer to specify : Frequency, Frequency Tolerance, Temperature Stability, Operating Temperature Range, Load Capacitance & Mode In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK http://www.actcrystals.com 1 of 3 Issue: 6 C1H3 Date: 6/02/05 Tel : 0044 (0)118 979 1238 Fax : 0044 (0)118 979 1283 email : [email protected] ACT HC49/U ( Custom Packages ) Standard Frequencies (MHz) 1.000 4.096 7.000 11.0592 18.432 40.000 1.8432 4.194304 7.15909 11.2896 19.6608 48.000 2.000 4.433619 7.3728 12.000 20.000 50.000 2.097425 4.9152 7.3728 12.288 22.1184 56.448 2.4576 5.000 7.680 13.000 24.00014 60.000 2.8224 5.0688 8.000 13.875 24.576 64.000 3.000 5.120 8.192 14.000 25.000 3.2768 5.185 8.67237 14.31818 27.000 3.579545 5.7143 9.000 14.7456 28.224 3.600 6.000 9.216 15.000 28.63636 3.6864 6.144 9.8304 16.000 29.4912 3.93216 6.176 10.000 16.384 30.000 4.000 6.400 10.245 16.9344 32.000 4.032 6.5536 10.752 17.73447 32.768 4.096 6.5539 11.000 18.000 36.000 A Dimensions in mm (max) A B C 11.05 5.0 10.5 HC49/U 13.5 D HC49/T 11.5 HC49/D 9.5 E 13.2 max 4.88±0.2 F G 4.0 H 0.45±0.05 B G C D E F H PACKAGE OPTIONS AVAILABLE Gull Wing. Gullwing with clip. With insulating washer. Cropped leads. With centre ground lead. With ground lead to top of can. Please note that all parameters can not necessarily be specified in the same device Customer to specify : Frequency, Frequency Tolerance, Temperature Stability, Operating Temperature Range, Load Capacitance & Mode In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK http://www.actcrystals.com 2 of 3 Issue: 6 C1H3 Date: 15/02/05 Tel : 0044 (0)118 979 1238 Fax : 0044 (0)118 979 1283 email : [email protected] ACT HC49/U ( Custom Packages ) GULLWING VERSION DIMENSIONS (mm) Reflow 240+/-5°C max. (260°C max contact sales desk) THREE LEAD VERSION DIMENSIONS (mm) Please note that all parameters can not necessarily be specified in the same device Customer to specify : Frequency, Frequency Tolerance, Temperature Stability, Operating Temperature Range, Load Capacitance & Mode In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK http://www.actcrystals.com 3 of 3 Issue: 6 C1H3 Date: 15/02/05