Part Number 856270 350 MHz SAW Filter Preliminary Data Sheet Features • • • • • • • • For wireless broadband applications Usable bandwidth 2.6MHz Low loss High attenuation Single ended operation Ceramic Surface Mount Package (SMP) Small size Package Pin Configuration Surface Mount 9.10 x 4.80 x 1.24 mm Bottom View 1 2 3 0.69 10 4 9 5 1.24 NOM. 1.35 MAX. 9.10 8 2.54 7 6 1.50 2.54 4.80 0.80 Pin No. 4 5 9 10 1,2,3,6,7,8 Description Input Input Return Output Output Return Case Ground 1.00 Dimensions shown are nominal in millimeters All tolerances are ±0.15mm except overall length and width +0.10mm/-0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0µm, over a 2 - 6µm Ni plating Subject to change or obsolescence without notice Rev - 26-Mar-2004 Page 1 of 5 Part Number 856270 350 MHz SAW Filter Preliminary Data Sheet Electrical Specifications (1) Operating Temperature Range: (2) 0 to +70 oC Parameter (3) Minimum Typical Maximum Unit 349 2.6 350 9.8 3.0 351 13 - MHz dB MHz 45 27 5 5 27 45 52 28 6 6 28 52 - dB dB dB dB dB dB - 85 50 50 100 - nsec Ω Ω Center Frequency Insertion Loss at 350 MHz (4) 3 dB Bandwidth Relative Attenuation (4) 10.0 - 347.8 MHz 347.0 - 347.8 MHz 347.8 - 348.3 MHz 351.7 - 352.2 MHz 352.2 - 353.0 MHz 353.0 - 1000 MHz Group Delay Variation 349 - 351 MHz (any 500 kHz channel) Optimal Source Impedance (5) Optimal Load Impedance (5) Notes: 1. 2. 3. 4. 5. All specifications are based on the test circuit shown below In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances Reference to insertion loss at 350MHz This is the optimum impedance in order to achieve the performance shown Test Circuit: 15nH 22nH 4 50 Ω Single-ended 50Ω Subject to change or obsolescence without notice 27pF 9 1,2,3,5 6,7,8,10 27pF Rev - 50Ω 26-Mar-2004 Page 2 of 5 Preliminary Data Sheet Part Number 856270 350 MHz SAW Filter Typical Performance (at +25oC) Subject to change or obsolescence without notice Rev - 26-Mar-2004 Page 3 of 5 Part Number 856270 350 MHz SAW Filter Preliminary Data Sheet Matching Schematics Actual matching values may vary due to PCB layout and parasitics 15nH 22nH 4 50 Ω Single-ended 50Ω 27pF 9 27pF 1,2,3,5 6,7,8,10 Marking 50Ω PCB Footprint 1.19 9.29 1.19 SAWTEK 856270 XXXXXX ID Dot 5.00 Date Code The date code consists of: day of the current year (Julian, 3 digits), last digit of the year (1 digit) and hour (2 digits) 3.55 1.53 1.70 1.01 1.01 This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel 2.7 16.8 ID dot Ø330 0.3 2.0 4.0 Ø1.5 A 1.75 7.5 9.4 Ø102 Ø20.2 Ø13.0 2.0 Direction of travel 1.6 5.1 8.0 Ø1.5 16.0 A Section A-A Dimensions shown are nominal in millimeters Packaging quantity: 4000 units/reel Subject to change or obsolescence without notice Rev - 26-Mar-2004 Page 4 of 5 Part Number 856270 350 MHz SAW Filter Preliminary Data Sheet Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Symbol Minimum Maximum T Tstg 0 -40 +70 +85 Unit o C C o Warnings • • Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure Links to Additional Technical Information PCB Layout Tips Qualification Flowchart Soldering Profile S-Parameters Other Technical Information Sawtek’s liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. Sawtek does not accept any liability for applications, processes, circuits or assemblies which are implemented using any Sawtek component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Subject to change or obsolescence without notice Or contact one of our worldwide network of sales offices, representatives or distributors Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: [email protected] Web: www.sawtek.com Rev - 26-Mar-2004 Page 5 of 5