Part Number 856656 140 MHz SAW Filter Data Sheet Features • • • • • • • • • • For 2 Carrier WCDMA applications Usable bandwidth 10 MHz Low loss High attenuation Designed to minimize EVM Single-ended operation Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant (2002/95/EC), Pb-free Pb Package Pin Configuration Surface Mount 13.30 x 6.50 x 1.75 mm Bottom View 1 1.75 NOM. 1.96 MAX. 2 3 4 12 5 11 6 0.76 13.3 10 2.54 9 8 7 2.18 6.50 2.54 1.17 x 3.76 0.79 1.50 Pin No. 11 12 5 6 1,2,3,4 7,8,9,10 Description Input Input return Output Output return Case ground Case ground Dimensions shown are nominal in millimeters All tolerances are ±0.15mm except overall length and width ±0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0µm, over a 2 - 6µm Ni plating Subject to change or obsolescence without notice Rev A 06-07 TriQuint Semiconductor, Inc. © Page 1 of 5 Part Number 856656 140 MHz SAW Filter Data Sheet Electrical Specifications (1) Operating Temperature Range: (2) -30 to +80 oC Parameter (3) Center Frequency Insertion Loss at 140 MHz Lower 1 dB Bandedge (4) Upper 1 dB Bandedge Lower 3 dB Bandedge (4) Upper 3 dB Bandedge 35 dB Bandwidth Amplitude Ripple (5) 135.5 - 144.5 MHz Absolute Group Delay 135.5 - 144.5 MHz Group Delay Variation 135.5 - 144.5 MHz Phase Linearity 135.5 - 144.5 MHz Input and Output VSWR 135.5 - 144.5 MHz Relative Attenuation(4) 40.0 - 110.0 MHz 110.0 - 125.0 MHz 125.0 - 131.2 MHz 148.8 - 155.0 MHz 155.0 - 170.0 MHz 170.0 - 240.0 MHz Source/Load Impedance (6) Minimum Typical Maximum Unit 144.5 145.0 - 140 9.2 134.270 146.090 133.97 146.33 14.33 10.5 135.5 135.0 16.0 MHz dB MHz MHz MHz MHz MHz - 0.2 0.8 dB p-p - 1.08 1.1 µs - 45 100 ns - 3.4 8.0 deg - 1.8 2.5 - 55 42 37 37 42 55 - 69.6 53.5 49.1 46.2 55.6 71.3 50 - dB dB dB dB dB dB Ω Notes: 1. 2. 3. 4. 5. 6. All specifications are based on the TriQuint test reference system In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances Relative to insertion loss at center frequency Amplitude Ripple is defined as the worse peak to adjacent valley within defined frequency points This is the optimum impedance in order to achieve the performance shown Test Circuit: Actual matching values may vary due to PCB layout and parasitics 36nH 50 Ω Single-ended Input 50 Ω 56pF Subject to change or obsolescence without notice 5 11 33pF Rev A 1,2,3,4,6 7,8,9,10,12 36nH 33pF 56pF 50 Ω 06-07 TriQuint Semiconductor, Inc. © 50 Ω Single-ended Output Page 2 of 5 Part Number 856656 140 MHz SAW Filter Data Sheet Typical Performance (at +25oC) Subject to change or obsolescence without notice Rev A 06-07 TriQuint Semiconductor, Inc. © Page 3 of 5 Part Number 856656 140 MHz SAW Filter Data Sheet Matching Schematics Actual matching values may vary due to PCB layout and parasitics 36nH 50 Ω Single-ended Input 33pF 56pF 50 Ω 36nH 5 11 56pF 33pF 1,2,3,4,6 7,8,9,10,12 Marking 50 Ω Single-ended Output 50 Ω PCB Footprint 13.51 1.70 3.53 SAWTEK 856656 XXXXXX 6.70 .99 ID Dot .99 Date Code 1.55 1.70 8.61 The date code consists of: day of the current year (Julian, 3 digits), last digit of the year (1 digit) and hour (2 digits) This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel ID dot 24.8 2.7 Ø330 0.3 4.0 2.0 Ø1.5 A 1.75 11.5 13.9 Ø102 24 Direction of travel Ø20.2 Ø13.0 2.0 2.3 Section A-A 7.1 12.0 Ø1.5 A Dimensions shown are nominal in millimeters Packaging quantity: 2000 units/reel Subject to change or obsolescence without notice Rev A 06-07 TriQuint Semiconductor, Inc. © Page 4 of 5 Part Number 856656 140 MHz SAW Filter Data Sheet Maximum Ratings Parameter Symbol Operating Temperature Range Storage Temperature Range Power Handling (1) Minimum Maximum -25 -40 - +80 +85 +15 T Tstg Pin Unit o C C o C o 1. Device is measured for equivalent 10K hours @ 55 ºC (CW Signal) Important Notes Warnings • • Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure RoHS Compliance • This product complies with EU directive 2002/95/EC (RoHS) Pb Solderability • Compatible with JEDEC J-STD-020C Pb-free process, 260°C peak reflow temperature (see soldering profile) Links to Additional Technical Information PCB Layout Tips Qualification Flowchart S-Parameters RoHS Information Soldering Profile Other Technical Information TriQuint’s liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. TriQuint does not accept any liability for applications, processes, circuits or assemblies, which are implemented using any TriQuint component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Subject to change or obsolescence without notice Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: [email protected] Web: www.triquint.com Rev A Or contact one of our worldwide Network of sales offices, Representatives or distributors 06-07 TriQuint Semiconductor, Inc. © Page 5 of 5