White Electronic Designs W3DG648V-D2 64MB- 8Mx64 SDRAM UNBUFFERED FEATURES DESCRIPTION PC100 and PC133 compatible Burst Mode Operation Auto and Self Refresh capability LVTTL compatible inputs and outputs The W3DG648V is a 8Mx64 synchronous DRAM module which consists of eight 4Mx16 SDRAM components in TSOP II package and one 2K EEPROM in an 8 pin TSSOP package for Serial Presence Detect which are mounted on a 168 Pin DIMM multilayer FR4 Substrate. Serial Presence Detect with EEPROM Fully synchronous: All signals are registered on the positive edge of the system clock Programmable Burst Lengths: 1, 2, 4, 8 or Full Page 3.3V + 0.3V Power Supply 168 pin DIMM JEDEC *This product is subject to change without notice PIN CONFIGURATIONS (FRONT SIDE/BACK SIDE) PIN NAMES Pin Front Pin Front Pin Front Pin Back Pin Back Pin Back A0 – A11 Address Input (Multiplexed) 1 VSS 29 DQM1 57 DQ18 85 VSS 113 DQM5 141 DQ50 BA0-1 Select Bank 2 DQ0 30 CS0# 58 DQ19 86 DQ32 114 CS1# 142 DQ51 DQ0-63 Data Input/Output 3 DQ1 31 DNU 59 VCC 87 DQ33 115 RAS# 143 VCC 4 DQ2 32 VSS 60 DQ20 88 DQ34 116 VSS 144 DQ52 CK0,CK2 Clock Input 5 DQ3 33 A0 61 NC 89 DQ35 117 A1 145 NC CKE0,CKE1 Clock Enable Input 6 VCC 34 A2 62 NC 90 VCC 118 A3 146 NC CS0#-CS3# 7 DQ4 35 A4 63 CKE1 91 DQ36 119 A5 147 DNU RAS# Row Address Strobe Chip Select Input 8 DQ5 36 A6 64 VSS 92 DQ37 120 A7 148 VSS CAS# Column Address Strobe 9 DQ6 37 A8 65 DQ21 93 DQ38 121 A9 149 DQ53 WE# Write Enable 10 DQ7 38 A10/AP 66 DQ22 94 DQ39 122 BA0 150 DQ54 DQM0-7 DQM 11 DQ8 39 BA1 67 DQ23 95 DQ40 123 A11 151 DQ55 12 VSS 40 VCC 68 VSS 96 VSS 124 VCC 152 VSS VCC Power Supply (3.3V) Ground NC 153 DQ56 VSS 126 NC 154 DQ57 SDA Serial Data I/O 127 VSS 155 DQ58 SCL Serial Clock DQ44 128 CKE0 156 DQ59 DNU Do Not Use 101 DQ45 129 CS3# 157 VCC 102 VCC 130 DQM6 158 DQ60 NC No Connect 13 DQ9 41 VCC 69 DQ24 97 DQ41 125 14 DQ10 42 CK0 70 DQ25 98 DQ42 15 DQ11 43 VSS 71 DQ26 99 DQ43 16 DQ12 44 DNU 72 DQ27 100 17 DQ13 45 CS2# 73 VCC 18 VCC 46 DQM2 74 DQ28 19 DQ14 47 DQM3 75 DQ29 103 DQ46 131 DQM7 159 DQ61 20 DQ15 48 DNU 76 DQ30 104 DQ47 132 NC 160 DQ62 21 NC 49 VCC 77 DQ31 105 NC 133 VCC 161 DQ63 22 NC 50 NC 78 VSS 106 NC 134 NC 162 VSS 23 VSS 51 NC 79 CK2 107 VSS 135 NC 163 NC 24 NC 52 NC 80 NC 108 NC 136 NC 164 NC 25 NC 53 NC 81 *WP 109 NC 137 NC 165 **SA0 26 VCC 54 VSS 82 **SDA 110 VCC 138 VSS 166 **SA1 27 WE# 55 DQ16 83 **SCL 111 CAS# 139 DQ48 167 **SA2 28 DQM0 56 DQ17 84 VCC 112 DQM4 140 DQ49 168 VCC * WP (write protect) option is available on Pin 81, see ordering information on page 5. **These pins should be NC in the system which does not support SPD. White Electronic Designs Corp. reserves the right to change products or specifications without notice. June 2003 Rev. 1 1 White Electronic Designs Corporation • (602) 437-1520 • www.wedc.com White Electronic Designs W3DG648V-D2 FUNCTIONAL BLOCK DIAGRAM White Electronic Designs Corp. reserves the right to change products or specifications without notice. June 2003 Rev. 1 2 White Electronic Designs Corporation • (602) 437-1520 • www.wedc.com White Electronic Designs W3DG648V-D2 ABSOLUTE MAXIMUM RATINGS Parameter Symbol Value Units Voltage on any pin relative to VSS VIN, VOUT -1.0 ~ 4.6 V Voltage on VCC supply relative to VSS VCC, VCCQ -1.0 ~ 4.6 V °C TSTG -55 ~ +150 Power Dissipation PD 8 W Short Circuit Current IOS 50 mA Storage Temperature Note: Permanent device damage may occur if "ABSOLUTE MAXIMUM RATINGS" are exceeded. Functional operation should be restricted to recommended operating condition. Exposure to higher than recommended voltage for extended periods of time could affect device relIability. RECOMMENDED DC OPERATING CONDITIONS (Voltage Referenced to: VSS = 0V, TA = 0°C to +70°C) Parameter Symbol Min Typ Max Unit Supply Voltage VCC 3.0 3.3 3.6 V Note Input High Voltage VIH 2.0 3.0 VCCQ+0.3 V 1 Input Low Voltage VIL -0.3 — 0.8 V 2 Output High Voltage VOH 2.4 — — V IOH= -2mA Output Low Voltage VOL — — 0.4 V IOL= -2mA Input Leakage Current ILI -10 — 10 µA 3 Note: 1. VIH (max)= 5.6V AC. The overshoot voltage duration is 3ns. 2. VIL (min)= -2.0V AC. The undershoot voltage duration is 3ns. 3. Any input 0V VIN VCCQ Input leakage currents include Hi-Z output leakage for all bi-directional buffers with Tri-State outputs. CAPACITANCE (TA = 23°C, f = 1MHz, VCC = 3.3V, VREF=1.4V ± 200mV) Parameter Symbol Min Max Unit Input Capacitance (A0-A12) CIN1 — 45 pF Input Capacitance (RAS#,CAS#,WE#) CIN2 — 45 pF Input Capacitance (CKE0) CIN3 — 25 pF Input Capacitance (CK0,CK2) CIN4 — 13 pF Input Capacitance (CS0#,CS2#) CIN5 — 15 pF Input Capacitance (DQM0-DQM7) CIN6 — 10 pF Input Capacitance (BA0-BA1) CIN7 — 45 pF Data input/output capacitance (DQ0-DQ63) COUT — 12 pF White Electronic Designs Corp. reserves the right to change products or specifications without notice. June 2003 Rev. 1 3 White Electronic Designs Corporation • (602) 437-1520 • www.wedc.com White Electronic Designs W3DG648V-D2 OPERATING CURRENT CHARACTERISTICS (VCC = 3.3V, TA = 0°C to +70°C) Parameter Operating Current (One bank active) Precharge Standby Current in Power Down Mode Symbol ICC1 Conditions Version Burst Length = 1 tRC tRC(min) IOL = 0mA 133 Units 100 620 500 ICC2P CKE VIL(max), tCC = 10ns 20 ICC2PS CKE & CK VIL(max), tCC = 20 1 mA mA Icc2N Precharge Standby Current in Non-Power Down Mode CKE VIH(min), CS VIH (min), tcc = 10ns Input signals are charged one time during 20ns 120 Icc2NS CKE VIH(min), CK VIL(max), tcc = Input signals are stable 50 Active standby current in power-down mode ICC3P CKE VIL(max), tCC = 10ns 25 ICC3PS CKE & CK VIL(max), tcc = 25 ICC3N CKE VIH(min), CS VIH (min), tcc = 10ns Input signals are changed one time during 20ns 200 mA ICC3NS CKE VIH(min), CK VIL(max), tcc = input signals are stable 120 mA Active standby current in non power-down mode ICC4 Operating current (Burst mode) mA mA Io = mA Page burst 4 Banks activated tCCD = 2CK 650 540 mA 660 600 mA Refresh current ICC5 tRC tRC (min) Self refresh current ICC6 CKE 0.2V Note 10 mA 1 2 Notes: 1. Measured with outputs open. 2. Refresh period is 64ms. 3. Unless otherwise noticed, input swing level is CMOS (VIH/VIL = VCCQ/VssQ) White Electronic Designs Corp. reserves the right to change products or specifications without notice. June 2003 Rev. 1 4 White Electronic Designs Corporation • (602) 437-1520 • www.wedc.com White Electronic Designs W3DG648V-D2 ORDERING INFORMATION Part Number Speed CAS Latency Part Number W3DG648V10D2 100MHz CL=2 WED3DG638V10D2 100MHz CL=2 W3DG648V7D2 133MHz CL=2 WED3DG638V7D2 133MHz CL=2 W3DG648V75D2 133MHz CL=3 WED3DG638V75D2 133MHz CL=3 Note: Modules are available in industrial temperature - 40°C to 85°C. Add an "I" to the end of the part number. Speed CAS Latency Note: Available with WP (write protect) on pin 81. PACKAGE DIMENSIONS ALL DIMENSIONS ARE IN INCHES White Electronic Designs Corp. reserves the right to change products or specifications without notice. June 2003 Rev. 1 5 White Electronic Designs Corporation • (602) 437-1520 • www.wedc.com