Pb Free Plating Product ISSUED DATE :2005/09/14 REVISED DATE : GM9452 BVDSS RDS(ON) ID N-CHANNEL ENHANCEMENT MODE POWER MOSFET 20V 50m 4A Description The GM9452 provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness. Features *Simple Drive Requirement *Low Gate Charge *Capable of 2.5V Gate Drive Package Dimensions SOT-89 REF. A B C D E F Millimeter Min. Max. 4.4 4.6 4.05 4.25 1.50 1.70 1.30 1.50 2.40 2.60 0.89 1.20 REF. G H I J K L M Millimeter Min. Max. 3.00 REF. 1.50 REF. 0.40 0.52 1.40 1.60 0.35 0.41 5 TYP. 0.70 REF. Absolute Maximum Ratings Parameter Drain-Source Voltage Gate-Source Voltage Ratings Unit VDS 20 V VGS 3 3 Continuous Drain Current , [email protected] Continuous Drain Current , [email protected] Pulsed Drain Current Symbol 1 16 V ID @TA=25 4 A ID @TA=70 2.5 A 12 A 1.25 W IDM PD @TA=25 Total Power Dissipation Linear Derating Factor 0.01 Operating Junction and Storage Temperature Range Tj, Tstg -55 ~ +150 Symbol Value Rthj-a 100 W/ Thermal Data Parameter Thermal Resistance Junction-ambient GM9452 3 Max. Unit /W Page: 1/4 ISSUED DATE :2005/09/14 REVISED DATE : Electrical Characteristics(Tj = 25 Parameter Unless otherwise specified) Symbol Min. Typ. Max. Unit Drain-Source Breakdown Voltage BVDSS 20 - - V Breakdown Voltage Temperature Coefficient BVDSS / Tj - 0.03 - Gate Threshold Voltage VGS(th) 0.7 - 1.5 V VDS=VGS, ID=250uA gfs - 10 - S VDS=5V, ID=3A IGSS - - 100 nA VGS= - - 1 uA VDS=20V, VGS=0 - - 25 uA VDS=16V, VGS=0 - - 38 - - 50 2 Forward Transconductance Gate-Source Leakage Current Drain-Source Leakage Current(Tj=25 ) Drain-Source Leakage Current(Tj=70 ) Static Drain-Source On-Resistance2 IDSS RDS(ON) V/ m Test Conditions VGS=0, ID=250uA Reference to 25 , ID=1mA 16V VGS=10V, ID=4A VGS=4.5V, ID=4A Total Gate Charge2 Qg - 6 10 Gate-Source Charge Qgs - 1 - Gate-Drain (“Miller”) Change Qgd - 2 - Td(on) - 8 - Tr - 9 - Td(off) - 13 - Tf - 3 - Input Capacitance Ciss - 360 570 Output Capacitance Coss - 80 - Reverse Transfer Capacitance Crss - 65 - Symbol Min. Typ. Max. Unit VSD - - 1.3 V IS=1A, VGS=0V Reverse Recovery Time Trr - 18 - ns Reverse Recovery Charge Qrr - 10 - nC IS=4A, VGS=0V dI/dt=100A/ s Turn-on Delay Time2 Rise Time Turn-off Delay Time Fall Time nc ID=4A VDS=16V VGS=4.5V ns VDS=10V ID=1A VGS=5V RG=3.3 RD=10 pF VGS=0V VDS=20V f=1.0MHz Source-Drain Diode Parameter 2 Forward On Voltage 2 Test Conditions Notes: 1. Pulse width limited by safe operating area. 2. Pulse width 300us, duty cycle 2%. 3. Surface mounted on FR4 board, t GM9452 10sec. Page: 2/4 ISSUED DATE :2005/09/14 REVISED DATE : Characteristics Curve Fig 1. Typical Output Characteristics Fig 3. On-Resistance v.s. Gate Voltage Fig 5. Forward Characteristics of Reverse Diode GM9452 Fig 2. Typical Output Characteristics Fig 4. Normalized On-Resistance v.s. Junction Temperature Fig 6. Gate Threshold Voltage v.s. Junction Temperature Page: 3/4 ISSUED DATE :2005/09/14 REVISED DATE : Fig 7. Gate Charge Characteristics Fig 9. Maximum Safe Operating Area Fig 11. Switching Time Waveform Fig 8. Typical Capacitance Characteristics Fig 10. Effective Transient Thermal Impedance Fig 12. Gate Charge Waveform Important Notice: All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of GTM. GTM reserves the right to make changes to its products without notice. GTM semiconductor products are not warranted to be suitable for use in life-support Applications, or systems. GTM assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. Head Office And Factory: Taiwan: No. 17-1 Tatung Rd. Fu Kou Hsin-Chu Industrial Park, Hsin-Chu, Taiwan, R. O. C. TEL : 886-3-597-7061 FAX : 886-3-597-9220, 597-0785 China: (201203) No.255, Jang-Jiang Tsai-Lueng RD. , Pu-Dung-Hsin District, Shang-Hai City, China TEL : 86-21-5895-7671 ~ 4 FAX : 86-21-38950165 GM9452 Page: 4/4