PC312 Subminiature PCB Telecom Relay FEATURES Subminiature design PC Terminals on .1 in. grid pattern Contact capacity from 1 mA to 5A Meets FCC part 68 voltage surge Class "B" insulation standard Three coil sensitivities available Sealed, immersion cleanable File # E86876 CONTACT DATA UL/CSA RATINGS 1 Form C SPDT Contact Form Initial Contact Resistance 1A @ 120VAC / 30 VDC Rated Load Rated Load (Special) 3A & 5A @ 120VAC / 30VDC Service Life 2 Amps Max. Switching Current Max. Switching Current (S) Ag (Fine Silver), Ag+Au (Fine Silver Gold Clad) AgNi (Silver Nickel), AgCdO (Silver Cadmium Oxide) Material 100 milliohms max @ 0.1A, 6VDC (with Gold Plate) 7 Mechanical 1 X 10 Operations Electrical 1 X 10 5 Operations 5 Amps Minimum Load (Gold Plated) 1 mA @ 1 VDC CHARACTERISTICS Operate Time 5 ms. Max. Release Time 5 ms. Max. Insulation Resistance Dielectric Strength 100 megohms min, at 500VDC, 50%RH 1250 Vrms, 1 min. between coil and contacts 500 Vrms, 1 min. between open contacts: 750 Vrms, 1 min for S version Surge Resistance 1500 V, between coil and contacts (FCC Part 68) Shock Resistance 10 g, 11ms, functional; 100 g, destructive Vibration Resistance DA 1.5 mm, 10 - 55 Hz Power Consumption 0.45 W, 0.36 W or 0.2 W Ambient Temperature Range -25 to 70 C operating, -30 to 130 storage Weight 3.5 grams approx. ORDERING INFORMATION Example: PC312 -12 H S Model Coil Voltage Coil Sensitivity Nil: 0.36 W; B: 0.45 W; H: 0.2 W Current Rating Nil: Standard, 2 Amp; S: Special 5 Amp 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: Call Toll Free (888)997-3933 Fax (818) 342-5296 email: [email protected] URL: pickercomponents.com PC312 Rev D 4-8-04 PAGE 1 PC312 PC312 COIL DATA Coil Voltage Resistance ohms + 10% Must Operate Must Release Voltage Max. Voltage Min. 3 Sensitivity Code B 0.45 W 20 5 56 70 120 3.75 0.5 6 80 100 180 4.50 0.6 Standard Sensitivity 0.36 W Sensitivity Code H 0.2 W 25 (VDC) (VDC) 45 2.25 0.3 9 180 220 440 6.75 0.9 12 320 400 700 9.00 1.2 18 720 900 24 1280 1600 Note: Custom coil voltages within the ranges shown are available on special order. 1620 13.5 1.8 2800 18.00 2.4 Dimensions in Inches (millimeters) Drawings are 2X actual size Side View End View .630 (16.0) .433 (11.0) .453 (11.5) Bottom View PC Board Layout .40 (10.2) Wiring Diagram .01 (2.54) .30 (7.6) .138 (3.5) Notes: Tolerances + .010 unless otherwise noted 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: Call Toll Free (888) 997-3933 Fax (818) 342-5296 email: [email protected] URL: pickercomponents.com PAGE 2