PTRA-T 30 AMP Panel Mount or PCB Power Relay With AC Coils FEATURES Panel or PC mount with QC terminals for the load Up to 30 amp switching capacity Up to 2 horsepower rating From 12 to 220 volt AC coils UL Class F insulation standard UL 873 spacing standard Epoxy sealed, immersion cleanable Now available Lead Free & RoHS Compliant File # E93379 UL/CSA RATINGS NO 30 A 20 A 30 A 20 A 20 A 20 A 30 A 20 A 30 A 20 A 20 A 20 A 120 VAC 240 VAC 30 A 30 A 20 A 20 A 30 A 30 A 20 A 20 A 250 VAC 120 VAC 2 HP 1 1/2 HP 2 HP 1 1/2 HP 240 VAC 120 VAC 80 A/30 A 98 A/30 A 80 A/30 A 98 A/30 A Voltage General Purpose 240 VAC 277 VAC 30 VDC Resistive ( 100,000 cycles) Motor ( 30,000 cycles ) LRA/FLA (locked rotor amps/full load amps) 1 Form C (SPDT) 1 Form B (SPST-NC) Load Type 1 Form A (SPST-NO) NC CONTACT DATA Material AgCdO (Silver Cadmium Oxide), AgSnOInO (Silver Tin Indium Oxide) Initial Contact Resistance 50 milliohms max @ 0.1A, 6VDC Service Life Mechanical 1 X 10 7 Operations Electrical 1 X 10 5 Operations CHARACTERISTICS 20 ms. max Operate Time Release Time 15 ms. max Insulation Resistance 1,000 megohms min, at 500 VDC, 50%RH Dielectric Strength 1500 Vrms, 1 min. between open contacts 1500 Vrms, 1 min. between coil and contacts Shock Resistance 10 g, 11ms, functional; 100 g, destructive Vibration Resistance DA 1.5mm, 10-55 Hz Power Consumption 0.9W, approx. Ambient Temperature Range -55 degrees C to 105 degrees C operating, -55 to 155 degrees C storage Weight 30 grams approx. PTRA-T Rev C 4-11-06 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: Call Toll Free (888)997-3933 Fax (818) 342-5296 email: [email protected] URL: pickercomponents.com PAGE 1 PTRA-T PTRA-T ORDERING INFORMATION Example: PTRA -1C -120 S T -X -T5 Model Contact Form 1A, 1B, or 1C Coil Voltage Configueration C: Dust Cover; S: Sealed plastic case O: Open Frame; Contact Material T: AgSnOInO Nil: AgCdO; Mounting Type T2: Form 1A PCB&QC, T3: Form 1C PCB&QC, T4 1A Panel all QC, T5: 1C Panel all QC RoHS Compliant Nil: Not Rohs, -X: RoHS Compliant COIL DATA Resistance Coil Voltage ohms_+ 10% Must Operate Voltage Max. (VAC) Must Release Voltage Min. Continuous Voltage Max. (VAC) (VDC) 12 26 10.20 1.8 13.8 24 106 20.40 3.6 27.6 120 2750 93.50 16.0 138 220/240 11000 187.00 33.0 276 Overall Dimensions Inches (millimeters) 1.27 (32.2) max Pin Layout 1.08 (27.5) max Bottom View Including Schematic .250 Ref. (6.35) 1.10 (28.0) max .440 (11.2) .300 (7.6) .600 (15.2) .500 (12.7) NO COM 1.71 (43.5) NC Notes: Breakable nib may be removed after flux removal. PC mount has .250 male QC terminals for load. Panel mount has .250 male QC terminals for the load and .187 male QC terminals for the coil. Tolerances + .010 unless otherwise noted Holes for load term. .081 + .005 Dia. (2.06 + .13) Holes for Coil term. .043 + .003 Dia. (1.09 + .08) .150 (3.81) .550 (13.97) .700 (17.78) 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: Call Toll Free (888) 997-3933 Fax (818) 342-5296 email: [email protected] URL: pickercomponents.com PAGE 2