MP4025 TOSHIBA Power Transistor Module Silicon NPN Epitaxial Type (darlington power transistor 4 in 1) MP4025 High Power Switching Applications Hammer Drive, Pulse Motor Drive and Inductive Load Switching · Small package by full molding (SIP 10 pin) · Built-in resistance (RB). · Surge voltage is clamped by zener diode (C-B). · Low VCE (sat): VCE (sat) = 1.2 V (max) (IC = 0.5 A, VBH = 4.2 V) · High DC current gain: hFE = 2000 (min) (VCE = 2 V, IC = 0.7 A) Maximum Ratings (Ta = 25°C) Characteristic Symbol Rating Unit Collector-base voltage VCBO 50 V Collector-emitter voltage VCEO 60 ± 10 V Emitter-base voltage VEBO 6 V VB 20 V DC IC 1.5 Pulse ICP 2.0 Collector power dissipation (1 device operation) PC 2.0 W Collector power dissipation (4 devices operation) PT 4.0 W Junction temperature Tj 150 °C Tstg -55~150 °C Input voltage Collector current Storage temperature range A Array Configuration 2 3 4 5 6 7 8 9 RB 1 10 R1 R2 RB » 3.6 kW, R1 » 5 kW, R2 » 300 W 000707EAA2 · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. 2000-08-21 1/2 MP4025 Thermal Characteristics Characteristic Thermal resistance of junction to ambient (4 devices operation, Ta = 25°C) Maximum lead temperature for soldering purposes (3.2 mm from case for 10 s) Symbol Max Unit SRth (j-a) 31.3 °C/W TL 260 °C Electrical Characteristics (Ta = 25°C) Characteristic Symbol Test Condition Min Typ. Max Unit Collector cut-off current ICBO VCB = 45 V, IE = 0 ¾ ¾ 10 mA Collector cut-off current ICEO VCE = 45 V, IB = 0 ¾ ¾ 10 mA Emitter cut-off current IEBO VEB = 6 V, IC = 0 0.46 ¾ 1.25 mA V (BR) CEO IC = 10 mA, IB = 0 50 60 70 V 2.5 3.6 4.7 kW 2000 ¾ ¾ ¾ Collector-emitter breakdown voltage Resistance RB ¾ DC current gain hFE VCE = 2 V, IC = 0.7 A Input voltage (low) VCE (sat) (1) IC = 0.5 A, VBH = 4.2 V ¾ ¾ 1.2 VCE (sat) (2) IC = 0.7 A, VBH = 9 V ¾ ¾ 1.5 VCE = 30 V, IC = 100 mA ¾ ¾ 0.7 ¾ 0.3 ¾ ¾ 4.0 ¾ ¾ 0.6 ¾ VBL Turn-on time ton Input Switching time Storage time 20 ms tstg 0 Fall time tf VBH = 5 V V V 34 9 Collector-emitter saturation voltage ms VCC ~ - 24 V Duty cycle < = 1% 000707EAA2 · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 2000-08-21 2/2