IRF HFA15TB60PBF

PD-95738
HFA15TB60PbF
HFA15TB60-1
Ultrafast, Soft Recovery Diode
HEXFRED
TM
Features
•
•
•
•
•
•
VR = 600V
Ultrafast Recovery
Ultrasoft Recovery
Very Low IRRM
Very Low Qrr
Specified at Operating Conditions
Lead-Free
VF = 1.7V
Qrr * = 84nC
di(rec)M/dt * = 188A/µs
* 125°C
Benefits
• Reduced RFI and EMI
• Reduced Power Loss in Diode and Switching
Transistor
• Higher Frequency Operation
• Reduced Snubbing
• Reduced Parts Count
Description
International Rectifier's HFA15TB60 is a state of the art ultra fast recovery
diode. Employing the latest in epitaxial construction and advanced processing
techniques it features a superb combination of characteristics which result in
performance which is unsurpassed by any rectifier previously available. With
basic ratings of 600 volts and 8 amps per Leg continuous current, the
HFA15TB60 is especially well suited for use as the companion diode for IGBTs
and MOSFETs. In addition to ultra fast recovery time, the HEXFRED product
line features extremely low values of peak recovery current (IRRM) and does not
exhibit any tendency to "snap-off" during the tb portion of recovery. The
HEXFRED features combine to offer designers a rectifier with lower noise and
significantly lower switching losses in both the diode and the switching transistor.
These HEXFRED advantages can help to significantly reduce snubbing,
component count and heatsink sizes. The HEXFRED HFA15TB60 is ideally suited
for applications in power supplies and power conversion systems (such as
inverters), motor drives, and many other similar applications where high speed,
high efficiency is needed.
HFA15TB60PbF
TO-220AC
TO-262
Absolute Maximum Ratings
Parameter
VR
IF @ TC = 100°C
IFSM
IFRM
P D @ TC = 25°C
P D @ TC = 100°C
TJ
TSTG
www.irf.com
Cathode-to-Anode Voltage
Continuous Forward Current
Single Pulse Forward Current
Maximum Repetitive Forward Current
Maximum Power Dissipation
Maximum Power Dissipation
Operating Junction and
Storage Temperature Range
Max
Units
600
15
150
60
74
29
V
- 55 to +150
C
A
W
1
10/22/04
HFA15TB60PbF, HFA15TB60-1
Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
Parameter
Min Typ Max Units
V BR
Cathode Anode Breakdown Voltage
600
V
V FM
Max Forward Voltage
IRM
Max Reverse Leakage Current
CT
Junction Capacitance
1.3 1.7
1.5 2.0
1.2 1.6
1.0
10
400 1000
25
50
LS
Series Inductance
8.0
V
µA
pF
nH
Test Conditions
IR = 100µA
IF = 15A
See Fig. 1
IF = 30A
IF = 15A, TJ = 125°C
See Fig. 2
V R = VR Rated
TJ = 125°C, VR = 0.8 x V R RatedD Rated
V R = 200V
See Fig. 3
Measured lead to lead 5mm from
package body
Dynamic Recovery Characteristics @ TJ = 25°C (unless otherwise specified)
Parameter
t rr
trr1
trr2
IRRM1
IRRM2
Qrr1
Qrr2
di(rec)M/dt1
di(rec)M/dt2
Reverse Recovery Time
See Fig. 5
Peak Recovery Current
See Fig. 6
Reverse Recovery Charge
See Fig. 7
Peak Rate of Fall of Recovery Current
See Fig. 8
During t b
Min Typ Max Units
19
42
74
4.0
6.5
84
241
188
160
60
120
6.0
10
180
600
ns
A
nC
A/µs
Test Conditions
IF = 1.0A, dif/dt = 200A/µs, V R = 30V
TJ = 25°C
TJ = 125°C
IF = 15A
TJ = 25°C
TJ = 125°C
VR = 200V
TJ = 25°C
TJ = 125°C
dif/dt = 200A/µs
TJ = 25°C
TJ = 125°C
Thermal - Mechanical Characteristics
Parameter
Tlead 
R thJC
RthJA ‚
RthCS ƒ
Lead Temperature
Thermal Resistance, Junction to Case
Thermal Resistance, Junction to Ambient
Thermal Resistance, Case to Heat Sink
Wt
Weight
T
Mounting Torque
Min
Typ
Max
Units
300
1.7
80
°C
K/W
12
10
g
(oz)
Kg-cm
lbf•in
0.5
2.0
0.07
6.0
5.0
 0.063 in. from Case (1.6mm) for 10 sec
‚ Typical Socket Mount
ƒ Mounting Surface, Flat, Smooth and Greased
2
www.irf.com
HFA15TB60PbF, HFA15TB60-1
10000
Reverse Current - IR (µA)
T J = 150°C
TJ = 150°C
1000
100
TJ = 125°C
10
1
0.1
TJ = 25°C
T J = 125°C
A
0.01
0
10
200
T = 25°C
J
400
600
Reverse Voltage - V R (V)
Fig. 2 - Typical Reverse Current vs. Reverse
Voltage
100
A
1
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
Forward Voltage Drop - V FM (V)
Fig. 1 - Maximum Forward Voltage Drop
vs. Instantaneous Forward Current
A
Junction Capacitance -CT (pF)
Instantaneous Forward Current - IF (A)
100
TJ = 25°C
A
10
10
100
1000
Reverse Voltage - V R (V)
Fig. 3 - Typical Junction Capacitance vs.
Reverse Voltage
Thermal Response (Z thJC )
10
1 D = 0.50
0.20
0.10
PDM
0.1
0.01
0.00001
0.05
t1
0.02
0.01
t2
SINGLE PULSE
(THERMAL RESPONSE)
0.0001
Notes:
1. Duty factor D = t 1 / t 2
2. Peak T J = P DM x Z thJC + TC
0.001
0.01
0.1
1
t1 , Rectangular Pulse Duration (sec)
Fig. 4 - Maximum Thermal Impedance Zthjc Characteristics
www.irf.com
3
HFA15TB60PbF, HFA15TB60-1
100
25
VR = 200V
TJ = 125°C
TJ = 25°C
I F = 30A
I F = 15A
80
20
I F = 5.0A
Irr- ( A)
trr- (nC)
I F = 30A
60
I F = 5.0A
40
10
20
5
VR = 200V
TJ = 125°C
TJ = 25°C
0
100
A
di f /dt - (A/µs)
1000
di f /dt - (A/µs)
Fig. 6 - Typical Recovery Current vs. dif/dt
800
600
A
0
100
1000
Fig. 5 - Typical Reverse Recovery vs. dif/dt
700
I F = 15A
15
10000
VR = 200V
TJ = 125°C
TJ = 25°C
VR = 200V
TJ = 125°C
TJ = 25°C
I F = 30A
Qrr- (nC)
500
di (rec) M/dt- (A /µs)
I F = 15A
I F = 5.0A
400
300
I F = 30A
IF = 15A
1000
IF = 5.0A
200
100
A
0
100
di f /dt - (A/µs)
Fig. 7 - Typical Stored Charge vs. dif /dt
4
1000
A
100
100
1000
di f /dt - (A/µs)
Fig. 8 - Typical di(rec)M/dt vs. dif/dt
www.irf.com
HFA15TB60PbF, HFA15TB60-1
3
t rr
IF
REVERSE RECOVERY CIRCUIT
tb
ta
0
Q rr
VR = 200V
2
I RRM
4
0.5 I RRM
di(rec)M/dt
0.01 Ω
L = 70µH
D.U.T.
dif/dt
ADJUST
D
G
IRFP250
S
Fig. 9 - Reverse Recovery Parameter Test
Circuit
www.irf.com
5
0.75 I RRM
1
di f /dt
1. dif/dt - Rate of change of current
through zero crossing
2. I RRM - Peak reverse recovery current
3. trr - Reverse recovery time measured
from zero crossing point of negative
going IF to point where a line passing
through 0.75 IRRM and 0.50 IRRM
extrapolated to zero current
4. Qrr - Area under curve defined by trr
and IRRM
trr X IRRM
Qrr =
2
5. di(rec)M/dt - Peak rate of change of
current during tb portion of trr
Fig. 10 - Reverse Recovery Waveform and
Definitions
5
HFA15TB60PbF, HFA15TB60-1
TO-220AC Package Outline
Dimensions are shown in millimeters (inches)
TO-220AC Part Marking Information
PART NUMBER
EXAMPLE: T HIS IS A HFA06TB120
LOT CODE 1789
ASSEMBLED ON WW 19, 2001
IN THE AS SEMBLY LINE "C"
INTERNATIONAL
RECTIF IER
LOGO
DAT E CODE
ASSEMBLY
LOT CODE
P = LEAD-FREE
YEAR 1 = 2001
WEEK 19
LINE C
PART NUMBER
EXAMPLE: T HIS IS A HFA06TB120
LOT CODE 1789
ASS EMBLED ON WW 19, 2001
IN THE ASSEMBLY LINE "C"
6
INTERNAT IONAL
RECTIF IER
LOGO
DATE CODE
ASS EMBLY
LOT CODE
YEAR 1 = 2001
WEEK 19
P = LEAD-FREE
www.irf.com
HFA15TB60PbF, HFA15TB60-1
Outline Table (TO-262)
2
1
N/C
3
Anode
Conforms to JEDEC Outline TO-262
Dimensions in millimeters and inches
Data and specifications subject to change without notice.
This product has been designed and qualified for Industrial Level.
Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
Visit us at www.irf.com for sales contact information. 10/04
www.irf.com
7