HITTITE HMC784MS8GE

HMC784MS8GE
v00.0808
GaAs MMIC 10 WATT T/R SWITCH
DC - 4 GHz
Typical Applications
Features
The HMC784MS8GE is ideal for:
Input P1dB: +40 dBm @ Vdd = +8V
• Cellular / 4G Infrastructure
High Third Order Intercept: +62 dBm
• WiMAX, WiBro & Fixed Wireless
Positive Control: +3 to +8 V
• Automotive Telematics
Low Insertion Loss: 0.4 dB
• Mobile Radio
MSOP8G Package: 14.8 mm2
• Test Equipment
General Description
Functional Diagram
The HMC784MS8GE is a high power SPDT switch in
an 8-lead MSOPG package for use in transmit-receive applications which require very low distortion at
high input signal power levels. The device can control signals from DC to 4 GHz. The design provides
exceptional intermodulation performance; > +60 dBm
third order intercept at +5V bias. RF1 and RF2 are
reflective shorts when “OFF”. On-chip circuitry allows
single positive supply operation from +3 Vdc to +8 Vdc
at very low DC current with control inputs compatible
with CMOS and most TTL logic families.
SWITCHES - SPDT - SMT
11
Electrical Specifi cations,
TA = +25° C, Vctl = 0/Vdd, Vdd = +5V (Unless Otherwise Stated), 50 Ohm System
Parameter
Frequency
Min.
DC - 1.0 GHz
DC - 2.0 GHz
DC - 2.5 GHz
DC - 3.0 GHz
DC - 4.0 GHz
Insertion Loss
Isolation
DC - 4.0 GHz
Return Loss (On State)
Input Power for 0.1dB Compression
Vdd = +3V
Vdd = +5V
Vdd = +8V
0.1 - 4.0 GHz
Input Power for 1dB Compression
Vdd = +3V
Vdd = +5V
Vdd = +8V
0.1 - 4.0 GHz
Input Third Order Intercept
(Two-tone input power = +30 dBm each tone)
26
DC - 1.0 GHz
DC - 2.0 GHz
DC - 3.0 GHz
DC - 4.0 GHz
0.02 - 0.1 GHz
0.1 - 2.0 GHz
0.1 - 3.0 GHz
0.1 - 4.0 GHz
32
35
38
Typ.
Max.
Units
0.4
0.6
0.8
0.9
1.3
0.6
0.8
1.1
1.3
2.0
dB
dB
dB
dB
dB
30
dB
35
30
20
10
dB
dB
dB
dB
32
37
38
dBm
dBm
dBm
35
38
41
dBm
dBm
dBm
42
62
61
60
dBm
dBm
dBm
dBm
15
40
ns
ns
Switching Characteristics
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
11 - 224
DC - 4.0 GHz
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC784MS8GE
v00.0808
GaAs MMIC 10 WATT T/R SWITCH
DC - 4 GHz
Isolation
0
0
-1
-10
ISOLATION (dB)
+25 C
+85 C
-40 C
-2
-3
-4
-30
-50
0
1
2
3
4
FREQUENCY (GHz)
5
6
Insertion Loss vs. Vdd
0
0
-1
-10
-2
+3V
+5V
+8V
-3
1
2
3
4
FREQUENCY (GHz)
5
6
11
Isolation vs. Vdd
0
ISOLATION (dB)
INSERTION LOSS (dB)
-20
-40
-5
-4
+3V
+5V
+8V
-20
-30
-40
-5
-50
0
1
2
3
4
FREQUENCY (GHz)
5
6
Return Loss
0
1
2
3
4
FREQUENCY (GHz)
5
6
5
6
RF1 to RF2 Isolation
0
0
-10
RF1 ON RF2 OFF
RF1 OFF RF2 ON
-10
ISOLATION (dB)
RETURN LOSS (dB)
RF1
RF2
-20
-30
INPUT RETURN LOSS
OUTPUT RETURN LOSS
-40
SWITCHES - SPDT - SMT
INSERTION LOSS (dB)
Insertion Loss vs. Temperature
-20
-30
-40
-50
-50
-60
0
1
2
3
4
FREQUENCY (GHz)
5
6
0
1
2
3
4
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
11 - 225
HMC784MS8GE
v00.0808
GaAs MMIC 10 WATT T/R SWITCH
DC - 4 GHz
Input P1dB vs. Vdd
Input P0.1dB vs. Vdd
50
50
+3V
+5V
+8V
40
35
30
1
2
FREQUENCY (GHz)
3
4
Input P1dB vs. Temperature @ Vdd = +5V
0
2
FREQUENCY (GHz)
3
4
70
+25 C
+85 C
-40 C
60
IP3 (dBm)
45
P1dB (dBm)
1
Input IP3 vs. Tone Power @ Vdd = +3V
50
40
35
50
40
+30 dBm
+27 dBm
+20 dBm
30
30
20
25
0
1
2
FREQUENCY (GHz)
3
0
4
70
60
60
IP3 (dBm)
70
50
+30 dBm
+27 dBm
+20 dBm
40
1
2
FREQUENCY (GHz)
3
4
Input IP3 vs. Tone Power @ Vdd = +8V
Input IP3 vs. Tone Power @ Vdd = +5V
IP3 (dBm)
SWITCHES - SPDT - SMT
35
25
0
50
+30 dBm
+27 dBm
+20 dBm
40
30
30
20
20
0
11 - 226
40
30
25
11
+3V
+5V
+8V
45
P0.1dB (dBm)
P1dB (dBm)
45
1
2
FREQUENCY (GHz)
3
4
0
1
2
FREQUENCY (GHz)
3
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
4
HMC784MS8GE
v00.0808
GaAs MMIC 10 WATT T/R SWITCH
DC - 4 GHz
Input IP3 vs. Temperature
27 dBm Tones, Vdd = +5V
70
70
60
60
IP3 (dBm)
50
40
+25 C
+85 C
-40 C
30
20
0
1
2
FREQUENCY (GHz)
3
0
4
Input IP3 vs. Temperature
27 dBm Tones, Vdd = +8V
50
60
45
50
+25 C
+85 C
-40 C
40
1
2
FREQUENCY (GHz)
3
4
11
Input P1dB vs. Vdd
70
P1dB (dBm)
IP3 (dBm)
+25 C
+85 C
-40 C
40
30
20
30
40
35
+3V
+5V
+8V
30
20
25
0
1
2
FREQUENCY (GHz)
3
0
4
0.05
0.1
0.15
0.2
0.25
FREQUENCY (GHz)
Input P0.1dB vs. Vdd
Input IP3 vs. Tone Power @ Vdd = +5V
50
70
+3V
+5V
+8V
60
IP3 (dBm)
45
P0.1dB (dBm)
50
40
35
30
SWITCHES - SPDT - SMT
IP3 (dBm)
Input IP3 vs. Temperature
27 dBm Tones, Vdd = +3V
50
+30 dBm
+27 dBm
+20 dBm
40
30
25
20
0
0.05
0.1
0.15
FREQUENCY (GHz)
0.2
0.25
0
0.05
0.1
0.15
0.2
0.25
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
11 - 227
HMC784MS8GE
v00.0808
GaAs MMIC 10 WATT T/R SWITCH
DC - 4 GHz
Bias Voltage & Current
Control Voltages & Currents
Vdd (V)
Typical Idd (μA)
+3
0.5
+5
2
+8
20
Vdd = +3V
(μA)
State
Vdd = +5V
(μA)
Vdd = +8V
(μA)
Low (0 to +0.2V)
0.5
2
20
High (Vdd ±0.2V)
0.1
0.1
0.1
Truth Table
Control Input (Vctl)
A
SWITCHES - SPDT - SMT
11
11 - 228
Signal Path State
B
RFC to RF1
RFC to RF2
High
Low
Off
On
Low
High
On
Off
Absolute Maximum Ratings
RF Input Power (Vdd = +8V,
50 Ohm source & load impedances)
+39 dBm (T = +85 °C)
Supply Voltage Range
(Vdd) (Vctl = 0V)
-0.2 to +9V
Control Voltage Range (A & B)
-0.2 to Vdd +0.5V
Channel Temperature
150 °C
Continuous Pdiss (T = 85 °C)
(derate 25 mW/°C above 85 °C)
1.217 W
Thermal Resistance
(Channel to ground paddle)
53.4 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Rating
Class 1A HBM
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Note: DC blocking capacitors are required at ports RFC,
RF1 and RF2. Their value will determine the lowest transmission frequency.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC784MS8GE
v00.0808
GaAs MMIC 10 WATT T/R SWITCH
DC - 4 GHz
Outline Drawing
11
NOTES:
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
HMC784MS8GE
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL Rating
MSL1
[2]
Package Marking [1]
H784
XXXX
[1] 4-Digit lot number XXXX
[2] Max peak reflow temperature of 260 °C
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
SWITCHES - SPDT - SMT
1. LEADFRAME MATERIAL: COPPER ALLOY
11 - 229
HMC784MS8GE
v00.0808
GaAs MMIC 10 WATT T/R SWITCH
DC - 4 GHz
Pin Descriptions
Function
Description
1
A
See truth table and control voltage table.
2
B
See truth table and control voltage table.
3, 5, 8
RFC, RF1, RF2
This pin is DC coupled and matched to 50 Ohms.
Blocking capacitors are required.
4
Vdd
Supply Voltage
6, 7
GND
Package bottom must also
be connected to PCB RF ground.
Interface Schematic
Typical Application Circuit
SWITCHES - SPDT - SMT
11
Pin Number
Notes:
1. Set logic gate and switch Vdd = +3V to +8V and use HCT series logic to provide a TTL driver interface.
2. Control inputs A/B can be driven directly with CMOS logic (HC) with Vdd of +3 to +8 Volts applied to the CMOS
logic gates and to pin 4 of the RF switch.
3. DC Blocking capacitors are required for each RF port as shown. Capacitor value determines lowest frequency
of operation.
4. Highest RF signal power capability is achieved with V set to +8V. The switch will operate properly (but at lower
RF power capability) at bias voltages down to +3V.
11 - 230
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC784MS8GE
v00.0808
GaAs MMIC 10 WATT T/R SWITCH
DC - 4 GHz
Evaluation Circuit Board
List of Materials for Evaluation PCB 104124 [1]
Item
Description
J1 - J3
PCB Mount SMA RF Connector
J4 - J7
DC Pin
C1 - C3
100 pF capacitor, 0402 Pkg.
C4
10 KpF capacitor, 0603 Pkg.
R1 - R3
100 Ohm Resistor, 0402 Pkg.
U1
HMC784MS8GE T/R Switch
PCB [2]
104122 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
The circuit board used in the final application
should be generated with proper RF circuit design
techniques. Signal lines at the RF port should have
50 ohm impedance and the package ground leads
and package bottom should be connected directly
to the ground plane similar to that shown above.
The evaluation circuit board shown above is available from Hittite Microwave Corporation upon
request.
SWITCHES - SPDT - SMT
11
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
11 - 231