REVISION DESCRIPTION Deleted AWG Rating Next to P2 Pin Out / Changed Cable Spec From 30 AWG to 28AWG REV. A DATE 03-12-07 APPROVED DP 4575 ± 100 1 P1 2 1 5 3 4 6 7 8 8 7 6 9 4 3 5 1 2 4 3 2 2 3 4 FRONT 1 6.0 ± 0.2 6.0 ± 0.2 1394 4P/M MOLDING TYPE (TOOLING NO. G102-288) 1394 4P/M MOLDING TYPE (TOOLING NO. G102-288) P2 FRONT PIN OUT TAPE P1 P2 140 ± 20 11 10 GREEN 1 2 RED 3 BLUE 3 4 1 ORANGE 4 SHELL PAIR SPIRAL 2 BRAID DRAIN NOTES: 1. CABLE: UL20276 28AWG IEEE1394 [28AWGx1P+FOIL+SP)x2+DW+FILLER+MYLAR+BD]x1 OUTER JACKET: BLACK, OD: 5.7 ± 0.2mm PRINTING: “E166307 AWM 20276 28AWG VW-1 IEEE AV 1394 COMPLIANT” 2. CONNECTORS: IEEE 1394 4P MALE TO IEEE 1394 4P MALE 3. HOOD: MOLDED TYPE. COLOR: BLACK 4. CABLE ELECTRICAL TEST: <1>.100% OPEN SHORT & MISS WIRE TEST <2>. INSULATION RESISTANCE: DC400V 10M ohm MIN. <3>. CONDUCTOR RESISTANCE: 1 ohm MAX. 5. PACKING: 1PC/POLYBAG SHELL No. SPECIFICATION STANDARD PARTS NAME QTY REMARKS 1 4P/M - CONTACT PHOSPHOR BRONZE / GOLD PLATED 8 2 4P/M - INSULATOR PBT / BLACK UL94V-0 2 3 4P/M - SHELL 1 SHELL / GOLD PLATED 2 4 4P/M - SHELL 2 SHELL / GOLD PLATED 2 5 SLIPCOVER PBT / TRANSPARENT 2 6 COPPER FOIL BOTH SIZES FOR SPECIAL ELECTRIC 2 7 4P/M - INNER MOLD PE NATURAL 2 8 4P/M - OUTER MOLD 45P PVC / COLOR: BLACK 2 9 CABLE UL20276 KL02004ABK01D 1 10 MINI TIE PE / BLACK 2 11 POLYBAG PE / 0.08x180x200mm 1 Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 Qualtek Electronics Corp. WCI DIVISION Part Number: Description: 1821023-15 IEEE1394 4P/M - IEEE1394 4P/M REV. A 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B. Grubb 01-25-07 01-25-07 JJH / 01-25-07