Pomona ® Model 4778 Cable Assembly Micrograbber® Breakouts To Bantam Plug MATERIALS: Connector: 1st End - Micrograbber® Breakouts Contact – Beryllium Copper, Alloy 165 Spring – Stainless Steel, 302 Finish: Contact – Gold plated per MIL-G-45204, Type II, Class 00. Insulation: Glass filled nylon. Color matches color of wire. Marking: “POMONA ELECTRONICS” “MICROGRABBER®” Wire: 20 AWG, stranding 41 x 36 tc., PVC insulated, 2.21 (.087) O.D. Color: One red and one black, red lead connected to tip, black lead connected to ring. Molded Breakout: PVC molded to breakout leads and cable. Color: Gray Cable: 2 Conductor shielded stranded copper, 26 AWG, PVC insulated, 4.57 (.180) O.D. Color: Gray Marking: “POMONA ELECTRONICS 4778-60” Connector: 2nd End – Brass Bantam Plug (Miniature Phone Plug) Insulation: PVC. Color: Black RATINGS: Operating Temperature: +50°C. (+122°F.) Max. Operating Voltage: 150 VRMS ORDERING INFORMATION: Model 4778-60 All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 6/9/99 SY/EH/LS Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 S:\Engineering \Release\DataSheets\FlukeDataSheet\d4778_1_01.doc PomonaACCESS 90277 (800) 444-6785 or (425) 446-6010 More drawings available at www.pomonaelectronics.com Page 1 of 1