Model 6553 Micro SMD Oscilloscope Tip Adapter FEATURES: Adapter attaches to Pomona Modular & Microline Series Oscilloscope Probes. Interfaces with Pomona’s micro SMD grabbers. Adapters provide electrical connection to probe tip and probe head grounding area. Dual leads allows oscilloscope probe to attach to .025” (.64 mm) diameter posts. Fits Pomona Oscilloscope Probe Models: 6491, 6492, 6493, 6494, 6495, 6496, 6497, 6498, 6499, 6500, 6501 Fits Pomona clips: All IC test Clips and SMD 5360, 5790, 6151, 6311, 6312, 6351, 6352, 6353, 6442, 6444, 6490 RATINGS: Operating Voltage: Hands free usage in controlled voltage environments: 45 Vrms maximum. For CE compliance: not intended for hand-held use at voltages above 33 Vrms/45 Vdc. ORDERING INFORMATION: Model 6553 All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Sales: 800-490-2361 Fax: 888-403-3360 Technical Support: 800-241-2060 ([email protected]) For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com Rev: 100 D1094823 Page 1 of 1