CC1V-T1A Tuning Fork Crystal 10 kHz – 2.1 MHz DIMENSIONS Package: Recommended Solder Pad: 8,0 1,2 2,7 4,0 2,3 2,3 4,2 max.1,75 3,7 1,2 All dimensions in mm typical 100% leadfree, RoHS - compliant Small SMT ceramic package Package height 1.75 mm SMD-package in Tape and Reel Ind. and Ext. temperature ranges High stability Low aging Low power consumption High shock and vibration resistance ELECTRICAL CHARACTERISTICS AT 25oC: DESCRIPTION: In the range between 10 and 200 kHz, the tuning fork resonators vibrate in the fundamental mode. From 201 to 560 kHz, an overtone mode is used. The frequency range from 561 kHz to 2.1 MHz is covered with length extensional resonators. The crystals are supplied in special trays (100 crystals per tray). For pick-and-place equipment, the parts are available in 16 mm tape: 7” (178 mm) reel with 1’000 crystals 10” (254 mm) reel with 2’000 crystals 13” (330 mm) reel with 4’000 crystals Frequency Range Load capacitance 1) Frequency tolerance 2) FL 10–200 201–560 561–2‘100 kHz CL 9.0 / 12.5 4.0 10.0 pF ΔF/F +/-30 +/-100 +/-100 ppm ΔF/F +/-100 +/-250 +/-500 ppm Drive level max. P 1.0 Insulation resistance min. Ri 500 MΩ ΔF/F +/-3 ppm Aging first year max. 3) μW FL 32.768 307.200 1‘000 kHz Series resistance typ./max. RS 37 / 60 1.4 / 3.5 0.6 / 1.2 kΩ Motional capacitance typ. C1 2.1 1.7 1.4 fF Static capacitance typ. C0 1.6 1.6 1.2 pF Turnover temperature T0 25 +/-5 39 +/-5 °C Frequency Example Frequency vs. temperature ΔF/F0 –0.035 22 +/-5 ppm/ °C² (T )2 - T0 +/-10% ppm 1) Other load capacitances on request. 2) Tighter and wider frequency tolerances on request. 3) Values for other frequencies consult factory. Version 5.1/05.2007 STANDARD FREQUENCIES: Frequency kHz Frequency MHz 10.000 12.800 16.000 16.384 20.480 1.0000 31.200 32.000 32.768 38.400 40.000 1.2288 40.960 60.000 75.000 76.800 100.000 1.8432 128.000 153.600 240.000 307.200 455.000 2.0000 768.000 Other frequencies between 10 kHz and 2.1 MHz on request ENVIRONMENTAL Conditions CHARACTERISTICS: TERMINATIONS AND PROCESSING: Storage temp. range –55 to +125°C Industrial operating temp. range –40 to +85°C Extended operating temp. range –55 to +125°C Max. Dev. Shock resistance ΔF/F 5000 g, 0.3 ms, ½ sine Vibration resistance ΔF/F 20 g / 10–2000 Hz +/-5 ppm +/-5 ppm Type Termination Processing CC1V-T1A For SMD mounting Au flashed pads Reflow soldering 260°C / 20 s max. PART NUMBER/ ORDERING INFORMATION EXAMPLE: CC 1 V-T 1 A 32.768 kHz 9.0 pF +/-30 ppm Frequency tolerance Crystal package C = Crystal in ceramic package Frequency FL Package lid C = Ceramic lid Package pad form A = Pads on both ends Package size 1 = 8.0 x 3.7 x 1.75 mm Pad plating 1 = Au flashed pads Blank V = Tuning fork or Length extension Package type T = For SMD mounting Load capacitance CL All specifications subject to change without notice. Micro Crystal Div. of ETA SA Mühlestrasse 14 CH-2540 Grenchen Switzerland 05.07 Tel. +41 32 655 82 82 Fax +41 32 655 82 83 [email protected] www.microcrystal.com Version 5.1/05.2007