ROHM SIM

SIM-012SB
Sensors
High power chip sensor, side view type
SIM-012SB
The SIM-012SB is ultra small size and high power ohip sensor. Original technology, original structure and original
Optical design enable to use Automatic moantinig machine, Reflow, ultra smallsize, High power.
zExternal dimensions (Unit : mm)
zApplications
Optical control equipment
Light source for remote control devices
Note) 1.Unspecified tolerance shall be +
− 0.2.
2.Dimension in parenthesis are show for
reference.
0.25
1
2
2
2-0.4
zFeatures
1) High power by φ2 lenze.
2) Emitting pore can have 7time high power then
substruk type with parabola structure.
3) Ultra -compact surface mount package.
(3mmx3mmx2mm)
4) It is possible to do Reflow.
3
0.8
2
3
R1
Internal connection diagram
1
2
zAbsolute maximum ratings (Ta=25°C)
Parameter
Symbol
Limits
Unit
Forward current
IF
40
mA
Reverse voltage
VR
5
V
Power dissipation
PD
60
mW
Pulse forward current
IFP∗
0.5
A
Operating temperature
Topr
−30~+85
°C
Storage temperature
Tstg
−40~+100
°C
∗ Pulse width=0.1msec, duty ratio 1%
1/3
SIM-012SB
Sensors
zElectrical and optical characteristics (Ta=25°C)
Symbol
Parameter
Min.
Typ.
Unit
Max.
Conditions
Optical output
PO
−
3.5
−
mW
IF=20mA
Emitting strength
IE
0.9
−
7.1
mW/sr
IF=20mA
Forward voltage
VF
−
1.2
1.5
V
IF=20mA
Reverse current
IR
−
−
10
µA
VR=3V
Peak light emitting wavelength
λP
−
950
−
nm
IF=20mA
∆λ
−
40
−
nm
IF=20mA
Half-viewing angle
θ1 / 2
−
±12
−
deg
IF=20mA
Pesponse time
tr·tf
−
1.0
−
µs
IF=20mA
fC
−
1.0
−
MHz
IF=20mA
Spectral line half width
Cut-off frequency
zElectrical and optical characteristic curves
8
50
40
30
20
10
0
−20
0
20
40
60
80
25°C
50°C
30
75°C
20
10
1
2
AMBIENT TEMPERATURE : Ta (°C)
FORWARD VOLTAGE : VF (V)
Fig.1 Forward current faloff
Fig.2 Forward current vs.
forward voltage
1000
6
4
2
0
0
10
20
30
40
FORWARD CURRENT : IF (mA)
Fig.3 Emitting strength vs.
forward current
100
RELATIVE OPTICAL OUTPUT : PO (%)
RELATIVE EMITTING STRENGTH : IE (%)
−25°C
0°C
40
0
0
100
EMITTING STRENGTH : IE (mW/sr)
FORWARD CURRENT : IF (mA)
FORWARD CURRENT : IF (mA)
50
100
10
−50
−25
0
25
50
75
100
80
60
40
20
0
900
920
940
960
980
AMBIENT TEMPERATURE : Ta (°C)
OPTICAL WAVELENGTH : λ (nm)
Fig.4 Relative emitting strength
vs.ambient temperature
Fig.5 Wavelength
1000
2/3
SIM-012SB
Sensors
−
90
0
100
+
RELATIVE EMITTING STRENGTH (%)
RELATIVE EMITTING STRENGTH (%)
100
80
70
60
50
40
30
20
10
0
−90
−60
−30
0
30
60
ANGULAR DISPLACEMENT : θ (deg)
Fig.6 Directional pattern(1)
90
− 0
90
+
80
70
60
50
40
30
20
10
0
−90
−60
−30
0
30
60
90
ANGULAR DISPLACEMENT : θ (deg)
Fig.7 Directional pattern(2)
3/3
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1