Embedded Power for Business-Critical Continuity Rev. 8.17.06 LCT43-E Series 1 of 3 LCT43-E Series RoHS 47 Watts Total Power: Input Voltage: # of Outputs: 47 Watts 85 - 264 VAC 120 - 300VDC Triple Electrical Specifications Special Features • • • • • • • Totally enclosed Universal input Quick Installation Built-in EMI filter Low output ripple Overvoltage protection Overload protection Input Input range 85 - 264 VAC (wide range) 120 - 300VDC Frequency 47-63 Hz Inrush current <20A peak @ 115VAC, <40A peak @ 230VAC cold start @ 25°C Input current 1A max. (RMS) @ 115VAC Efficiency 70% typical at full load EMI filter FCC Class B conducted and radiated; CISPR 22 Class B conducted and radiated; EN55022 Class B conducted and radiated Bellcore GR-1089-core Class B conducted Safety ground leadage current <3.5 mA @ 50/60 Hz, 264 VAC input Output Maximum power 47W with 12CFM forced air Cross regulation ±2% on output 1; ±5% on outputs 2, 3 Hold-up time 10ms @ 47W load, 100VAC input Overload protection Short circuit protection on all outputs. Case overload protected @ 110-135% above peak rating Overvoltage protection 5.50-6.75 VDC on main output Safety VDE UL CSA CB CE 0805/EN60950 21310-3336-0003 UL60950 E186249 CSA 22.2-234 -950-95-M90 Certificate and report 6593 Mark (LVD) Embedded Power for Business-Critical Continuity Rev. 8.17.06 LCT43-E Series 2 of 3 Environmental Specifications Operating temperature: 0° to 50°C ambient derate each output as 2.5% per degree from 50° to 70°C Storage temperature: -40°C to +85°C Temperature coefficient: ±.04% per °C Electromagnetic designed to meet IEC1000-4; susceptibility: -2, -3, -4, -5, -6, -8, -11 Level 3 Humidity: Vibration: MTBF demonstrated Operating; non-condensing 5% to 90% .41G from 3 to 500Hz; Spectral break points of .0065 G2/Hz at 10 Hz and 200 Hz and 5 db/octave roll off at each end, 2 hours per axis >300,000 hours at full load and 25°C ambient conditions Ordering Information Model Output Minimu Number Voltage m Load LCT43-E Maximum Load Maximum with Load with Peak Regulati Ripple on2 P/P (PARD)3 Convection 12CFM Forced Load1 Cooling Air +5V 1.0A 4A 7A 8A +4/-2% 50mV +12V -12V 0.1A 0A 1A 0.5A 1.2A 0.5A 1.5A 0.6A ±5% ±5% 120mV 120mV 1. Peak current lasting <30 seconds with a maximum 10% duty cycle. 2. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 μF (tantalum capacitor) in parallel with a 0.1 μF capacitor at rated line voltage and load ranges. Embedded Power for Business-Critical Continuity Rev. 8.17.06 LCT43-E Series 3 of 3 Mechanical Drawing Astec Power Mating Connectors 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 Technical Support: +1 888 41 ASTEC or +1 407 241 2752 AC Input: IEC 320 DC Outputs: Molex 15-48-0406 (USA) Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ±0.02" (±0.5mm) 3. 4. 5. Specifications are for convection rating at factory settings at 115VAC input 25ºC unless otherwise stated Warranty: 1 year Weight: 1.25lbs/0.57kg Pin Assignments Connector LCT43-E SK1-1 SK1-2 SK1-3 AC Line Ground AC Neutral SK2-1 SK2- 2 SK2- 3 -12V Com +5V SK2-4 +5V SK2-5 SK2-6 Common +12V Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Units 2111-2116, Level 21 Tower 1, Metroplaza 223, Hing Fong Road Kwai Fong, New Territories Hong Kong Telephone: +852 2437 9662 Facsimile: +852 2402 4426 For global contact, visit: www.astecpower.com [email protected] While every precaution has been taken to ensure accuracy and completeness in this literature, Astec Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Printed in U S A Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Power Inbound Power Integrated Cabinet Solutions Outside Plant Precision Cooling Site Monitoring and Services EmersonNetworkPower. com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2006 Emerson Electric Co.