MAAP-000082 PHS Power Amplifier 1880 - 1930 MHz Rev. V2 Functional Block Diagram Features • • • • • • • • • • • Ideal for PHS Applications Linear Output Power: +24 dBm Typical @ 3.6 V Small Signal Gain: 36 dB Typical Low Current: 200 mA at +21 dBm Pout Passes 1KV ESD rating Micro-Amp Shutdown Operates from 2.8 V to 4.2 V Lead-Free 3 mm, 12-Lead PQFN Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound RoHS* Compliant and 260°C Reflow Compatible Description The MAAP-000082 is a three stage power amplifier designed for PHS applications. This power amplifier is packaged in a lead-free standard outline 3 mm, 12-lead PQFN plastic package. Ordering Information Pin Configuration Pin No. Pin Name Description 1 RFIN RF Input 1,2 Part Number Package 2 N/C No Connection MAAP-000082-TR3000 3000 piece reel 3 VEN1,2 Power Enable MAAP-000082-001SMB Sample Test Board 1880 - 1930 MHz Tuning 4 VEN3 Power Enable 5 N/C No Connection 6 N/C No Connection 7 RFOUT / VCC3 RF Output, 3rd Stage Supply 8 RFOUT / VCC3 RF Output, 3rd Stage Supply 9 RFOUT / VCC3 RF Output, 3rd Stage Supply 10 VCC2 2nd Stage Supply 11 N/C No Connection VCC1 1st Stage Supply GND RF & DC Ground 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. Absolute Maximum Ratings 3,4 Parameter Absolute Maximum Input Power 0 dBm Operating Supply Voltage +4.2 Volts Operating Control Voltage +3.0 Volts Operating Temperature -40°C to +85°C Channel Temperature +150 °C Storage Temperature -50°C to +150°C 12 Pad 5 5. The exposed pad centered on the package bottom must be connected to RF and DC ground. 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAP-000082 PHS Power Amplifier 1880 - 1930 MHz Rev. V2 Electrical Specifications: F = 1905 MHz, TA = +25 °C, VCC = 3.6 V, VEN = 3.0 V, ZO = 50 Ω Parameter Test Conditions Units Min. Typ. Max. Gain POUT = +21 dBm dB 34 36 38 Input Return Loss — dB — 15 — ACPR POUT = +21 dBm, 600 KHz offset POUT = +24 dBm, 600 KHz offset dBc dBc — — -63 -60 -60 — ALT POUT = +21 dBm, 900 KHz offset POUT = +24 dBm, 900 KHz offset dBc dBc — — -72 -70 -69 — P1dB — dBm — 26.5 — Idle Current POUT = +21 dBm POUT = +24 dBm POUT = +21 dBm POUT = +24 dBm No RF applied % % mA mA mA — — — — — 17 25 200 280 90 — — 240 — 150 Current, Off VEN = 0 V µA — 3 — Enable Current VEN = 3.0 V mA — 4 — Forward Isolation VEN = 0 V POUT <27 dBm, VSWR < 4:1 -20°C < TA < +70ºC dB — 39 — PAE Operating Current Stability All spurs < -60 dBc Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Silicon germanium Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAP-000082 PHS Power Amplifier 1880 - 1930 MHz Rev. V2 Recommended PCB Configuration Schematic External Parts List Designator Value C1 1000 pF Foot Print Manufacturer 0402 Murata C2 18 pF 0402 Murata C3, C4, C5, C10, C11 0.1 µF 0402 Murata C6 15 pF 0402 Murata C7 47 pF 0402 Murata C8 0.5 pF 0402 Murata C9 2.7 pF 0402 Murata L1 2.2 nH 0402 Coilcraft L2 15 nH 0402 Coilcraft R1 820 Ω 0402 Panasonic Frequency = 1905 MHz Impedance Electrical Length (mils) T1 50 Ω 200 T2 50 Ω 120 T3 50 Ω 70 FR-4 Circuit Board, thickness = 0.20 mm 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAP-000082 PHS Power Amplifier 1880 - 1930 MHz Rev. V2 Typical Characteristics @ +25°C, -40°C, +85°C, +60°C, -10°C, VCC = 3.6 V Gain vs. POUT @ 1905 MHz PAE vs. POUT @ 1905 MHz 40 50 +25°C -40°C +85°C +60°C -10°C 45 +25°C -40°C +85°C +60°C -10°C 35 30 40 25 35 20 15 30 10 25 5 20 0 10 15 20 P 25 10 30 15 (dBm) OUT 20 P ACPR vs. POUT @ 1905 MHz OUT 25 30 25 30 (dBm) ALT vs. POUT @ 1905 MHz 0 0 +25°C -40°C +85°C +60°C -10°C -20 +25°C -40°C +85°C +60°C -10°C -20 -40 -40 -60 -60 -80 -80 -100 -100 10 15 20 P 25 30 (dBm) OUT 10 15 20 P OUT (dBm) ICC vs. POUT @ 1905 MHz 600 +25°C -40°C +85°C +60°C -10°C 500 400 300 200 100 10 15 20 P OUT 25 30 (dBm) 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAP-000082 PHS Power Amplifier 1880 - 1930 MHz Rev. V2 Typical Performance Curves, 1905 MHz, VCC swept from 3.4 V to 4.2 V by 0.2 steps PAE vs. POUT Gain vs. POUT 40 40 35 38 Gain @3.4 V Gain @3.6 V Gain @3.8 V Gain @4.0 V Gain @4.2 V 30 25 36 20 34 15 Gain @3.4 V Gain @3.6 V Gain @3.8 V Gain @4.0 V Gain @4.2 V 32 10 5 30 0 10 15 P 20 OUT (dBm) 25 30 ACPR vs. POUT 10 15 P 20 OUT (dBm) 25 30 ALT vs. POUT 0 0 Gain @3.4 V Gain @3.6 V Gain @3.8 V Gain @4.0 V Gain @4.2 V -20 Gain @3.4 V Gain @3.6 V Gain @3.8 V Gain @4.0 V Gain @4.2 V -20 -40 -40 -60 -60 -80 -80 -100 -100 10 15 P 20 OUT (dBm) 25 30 10 15 P 20 OUT (dBm) 25 30 ICC vs. POUT 600 Gain @3.4 V Gain @3.6 V Gain @3.8 V Gain @4.0 V Gain @4.2 V 500 400 300 200 100 10 15 P 20 OUT (dBm) 25 30 5 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAP-000082 PHS Power Amplifier 1880 - 1930 MHz Rev. V2 Lead-Free 3 mm 12-Lead PQFN† † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. 6 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.