35Amp 1/2" Pressfit 1.0mm LEAD Auto Rectifiers Data Sheet PFR3501~3506 N/ P DESCRIPTION MECHANICAL DIMENSIONS PRESS-FIT Features NOTE: Low Cost 1.PFR350XP Positive (Forward), (+) Cathode To Case,Color Code Red Super Cool 2.PFR350XN Negative(Reverse),(-): Long life Features Anode To Case, Color Code Black High Current Capability Electrical Characteristics@25C Average Forward Current, Io at Tc=150C 60HZ, Resistive Or Inductive Load Symbol PFR3501P PFR3501N PFR3502P PFR3502N IF PFR3504P PFR3506P Unit PFR3504N PFR3506N 35 A(DC) Peak Reverse Voltage, Repetitive:VRRM VRRM 100 200 400 600 DC Reverse Voltage, VR V(DC) 100 200 400 600 VRMS 70 140 280 420 Maximum RMS Voltage Max. Inst Forward Voltage Drop. VF at 80Amp V(DC) VF 1.15 V IFSM 400 A IR 10 uA IR 500 uA R0JA 1.2 C/W -65 to +175 C Peak Forward Surge Current, IFM(surge): 8.3ms. Single Half Sine-Wave Superimposed On Rated Load (JEDEC method) Maximum Reverse Current IR At Rated DC Reverse Voltage. TC= 25C Maximum Reverse Current IR At Rated DC Reverse Voltage. TC=100C Maximum Thermal Resistance, Junction To Case (single side cooled) Operating And Storage Temperature Range Tj; Tstrg Junction Capacitance (pF) Typical Junction Capacitance 1000 500 200 100 50 10 .1 100 10 1 Reverse Voltage (V) F = 1 MHz VSIG = 50 Vpp TJ = 25°° C Forward Current Derating Curve Average Forward Current (A) Non-Repetitive Peak Forward Surge Current 1000 TJ = 25°°C 500 200 100 TJ = 150°°C Amps 50 10 .1 1 10 Number of Cycles @ 60 Hz 100 Single Phase ½ Wave Res. or Ind. Load 50 40 10 30 20 10 5 20 Capacitive Load IPK/AV = 5, 10 & 20 0 25 5 0 7 5 100 125 150 175 Lead Temperature (°° C) Typical Instantaneous Forward Characteristics 1000 TJ = 100°°C .1 .01 .001 60 Forward Current (A) Reverse Current (µ µA) Typical Reverse Characteristics 10 1 PFR3501~3506P/N 35Amp 1/2" Pressfit 1.0mm LEAD Auto Rectifiers Data Sheet TJ = 25°°C 40 80 120 Percent of Rated Peak Voltage 100 Ratings at 25 Deg. C ambient temperature unless otherwise specified. 10 1 .1 NOTES: 1. Measured @ 1 MHz and applied reverse voltage of 4.0V. 2. Thermal Resistance Junction to Ambient, Jedec Method. 3. When Mounted to heat sink, from body. TJ = 150°°C PW = 300 µs Forward Voltage (V) .6 .9 1.1 1.4 1.7 2.0 2.3 2.6 Single Phase Half Wave, 60 Hz Resistive or Inductive Load. For Capacitive Load, Derate Current by 20%.