AMPHENOL MS25042-36D

MS & 97B - Series
ACR11 0601
MS And 97B Series
Introduction
Amphenol MS and 97B series are two series of thread & Bayonetcoupled connectors designed to meet the operating requirements
of MIL-C-5015. Available in a variety of styles and classes, these
connectors are primarily used in a range of military and industrial
applications where specific degrees of environmental protection
are required.
Although MS series have identical insert arrangements and other
similar component parts, the two series differ in that Amphenol MS
series of connectors are also qualified to meet the operating
requirements of Defence Standard Joint Services Specification
JSS50812 , issued by the Electronics Components
Standardization Organisation (LCSO).
Amphenol 97B connectors feature a quick mating bayonet
coupling with an audible full mating feature. This series uses the
same MIL-C-5015 insert patterns and are used in high shock
and vibration environments encountered in commercial,
geophysical, aerospace, ground support and shipboard
applications.
Page Contents
Introduction
Connector styles
General description
Electrical data
Insert orientations
Insert arrangements
Shell types
Back accessories
Other accessories
MS/97B Series
Ordering MS/97B series
connectors
1
1
2-3
4
5
6
7-18
19-25
26-29
30-33
34
35
AMPHENOL
MS And 97B Series
Connector Styles - MS
Class F
MS-3108
MS-4108
Class A=R
MS-3106
MS-4106
Class A
MS-3100
MS-4100
Class E and F
MS-3101
MS-4101
Class R
cable
clamp
AMPHENOL
back
shell
grommet
sleeve
2
grommet
MS-3102
MS-4102
MS And 97B Series
Connector Styles - 97B
Class F
97B - 3108
97B - 4108
Class A=R
97B - 3106
97B - 4106
Class A
97B - 3100
97B - 4100
Class F
97B - 3101
97B - 4101
97B - 3103
97B - 4103
Class R
cable
clamp
back
shell
grommet
sleeve
grommet
97B - 3102
97B - 4102
3
AMPHENOL
MS And 97B Series
General Description
These electrical connectors are designated MS
because the interchangeability and operating
characteristics are determined by U.S. Military
Specifications. These specifications are revised
from time to time to incorporate performance
requirements dictated by design advances and
more stringent requirements of allied equipment.
The several designations of MS and 97B
connectors meet different requirements of MILC-5015. These designations and general
descriptions are as follows :
Inserts and grommet
Synthetic inserts and grommet manufactured
according to MIL-R-3065, offer high dielectric
strength and are resistant to oils, gasoline and low
temperature. DAP is dimensionally stable, has high
arc resistance and high insulation resistance under
both humidity and thermal stress.
General description
Plugs are available in A, F and R types. Receptacles
are available in A, E, F and R types.
Shell
A Solid back shell
Shell constructions include solid back shell (A)
and environmental resistant (E, F & R).
Environmental resistant connectors provide a
moisture barrier and assure a positive seal. Shell
styles consist of wall type receptacles (3100),
cable receptacles (3101), box receptacles
(3102), straight plugs (3106) and angle plugs
(3108). Shell hardware is manufactured from
aluminium alloy and cadmium plated with olive
drab chromate finish. This finish has excellent
conductivity; it is non-reflecting and corrosion
resistant. Black anodised finish and cadmiumfree zinc plating with olive drab chromate finish
are also available. For details, contact factory.
Intended for general service usage to provide
convenient means of connecting and disconnecting
electrical circuits in industrial and military
applications.
Environmental resisting
Intended for use where the connector will be subject
to heavy condensation and rapid changes in
temperature or pressure and/or where the connector
is subjected to high vibratory conditions.
E
Environmental resisting with grommet seal and
strain relief backshell except for 3102 type.
Contacts
F
Environmental resisting with grommet seal,
strain relief backshell and front gasket seal for plug
type.
Pin and socket contacts are of brass and
generally silver plated. Gold plating is also
available. For details contact factory. These
contacts are available for solder or crimp
termination. Special arrangements of contacts
for pre-mating and pre-earth are also available.
R
Environmental resisting with grommet seal,
shorter and lightweight.
Features for 97B reverse bayonet coupling connectors
with Mil-C-5015 insert patterns:
Available in both crimp and solder terminations
Contacts available in gold and silver plating
Numerous finishes available
Zinc alloy plating (cadmium free) available
Quick positive coupling
Audible and tactile indication of full coupling
Waterproof
No lockwiring required
High shock and vibration capabilities
Rugged construction; aluminum or stainless
steel components
Intermateable with existing VG95234
connectors
500 couplings minimum
Insert available in Neoprene material (alternate
inserts materials available upon request)
Operating temperature range with Neoprene
inserts: -550C to +1250C
AMPHENOL
4
MS And 97B Series
Electrical Data
Dielectric strength
Service rating
Test Voltage
Vac rms
Inst.
1000V
A
2000V
D
2800V
E
3500V
B
4500V
C
7000V
Contact rating
Contact
Size
Rated
Current
Contact
Resistance
miliohms
16
13A
3.46
12
23A
1.83
8
46A
0.52
4
80A
0.26
0
150A
0.14
Service rating
Operating Voltage
DC at Sea Level
Operating Voltage
AC at Sea Level
Inst.
250V
200V
A
700V
500V
D
1250V
900V
E
1750V
1250V
B
2450V
1750V
C
4200V
3000V
Service rating
5
AMPHENOL
MS And 97B Series
Insert Orientations
To avoid cross-plugging problems in applications
requiring the use of more than one connector of
the same size and arrangement, alternate insert
rotations are available as indicated in the
accompanying chart.
The following insert arrangements have the same
alternate insert rotations for W, X, Y and Z which
are as below :
Degree
As shown in the daigram below, the front face of
the pin insert is rotated within the shell in a
clockwise direction from the normal shell key. The
socket insert would be rotated counterclockwise
the same number of degrees with respect to the
normal shell key.
B
B
Position W
Position X
B
B
A
A
Position Y
Position Z
Views looking into front face of pin insert or rear
of socket insert
Insert
Arrangement
12S-3
14S-2
14S-5
14S-7
14S-9
16-9
16-10
16-11
16-13
16S-1
16S-4
16S-5
16S-6
16S-8
18-1
18-3
18-4
18-8
18-10
18-11
18-12
18-15
18-20
18-22
18-29
20-3
20-4
20-5
AMPHENOL
Degrees
W
X
Y
Z
70
90
70
35
90
35
35
80
35
70
90
70
35
35
70
80
90
70
90
70
45
35
145
120
110
180
145
110
180
110
110
110
145
180
170
145
110
110
120
170
120
180
145
180
145
110
110
215
240
270
215
250
270
250
250
250
215
270
265
215
250
250
240
265
240
270
215
270
215
250
250
290
290
325
325
325
280
325
290
290
325
325
290
280
290
290
325
Insert
Arrangement
20-6
20-15
20-17
20-18
20-19
20-21
20-23
20-24
20-27
20-29
22-1
22-2
22-4
22-5
22-8
22-9
22-10
22-11
22-13
22-20
22-22
22-23
22-27
22-28
24-2
24-9
24-10
24-11
X
Y
Z
80
110
250
280
16-7 20-16
18-5 20-20
18-9 20-22
18-13 22-3
18-14 22-6
20-7 22-12
20-8 22-14
20-9 22-15
20-12 22-16
20-14 22-17
A
A
W
Degrees
W
X
Y
Z
70
80
90
35
90
35
35
35
35
80
35
70
35
35
35
70
35
35
35
35
35
80
80
80
35
80
35
145
180
110
180
110
110
110
110
110
145
110
110
110
145
110
110
110
110
110
110
110
215
270
250
270
250
250
250
250
250
215
250
250
250
215
250
250
250
250
250
250
250
250
250
290
280
325
325
325
325
325
280
325
290
325
325
325
290
325
325
325
325
280
280
280
325
280
325
6
22-18
22-19
22-21
22-24
22-25
22-29
22-33
22-34
24-1
24-3
24-4
24-5
24-6
24-7
24-12
24-14
24-16
24-17
24-20
Insert
Arrangement
24-22
24-27
28-2
28-3
28-5
28-6
28-7
28-12
28-18
28-22
32-8
36-3
36-4
36-5
36-6
36-9
36-10
36-14
36-15
40-56
24-21
24-28
28-1
28-4
28-8
28-9
28-10
28-11
28-14
28-15
28-16
28-17
28-19
28-20
28-21
32-1
32-3
32-4
36-1
36-7
36-8
36-13
Degrees
W
X
Y
Z
45
80
35
70
35
70
35
90
70
70
80
70
70
35
80
80
90
60
72
110
110
145
110
145
110
180
145
145
125
145
145
120
110
125
125
180
125
144
250
250
215
250
215
250
270
215
215
235
215
215
240
250
235
235
270
245
216
280
325
290
325
290
325
290
290
280
290
290
325
280
280
305
288
MS And 97B Series
Insert Arrangements
Insert Service Total
Contact Size
Arran- Rating Cont0
4 8 12 16
gement
acts
10S-2 A
1
1
10SL-3 A
3
3
10SL-4 A
2
2
12S-3 A
2
2
12S-4 D
1
1
12-5
D
1
1
3
3
14S-1 A
14S-2 Inst
4
4
14S-4 D
1
1
14S-5 Inst
5
5
14S-6 Inst
6
6
14S-7 A
3
3
14S-9 A
2
2
14S-10 Inst
4
4
14S-12 A
3
3
14-3
A
1
1
14S-A7 A
19 19
16S-1 A
7
7
16S-3 B
1
1
16S-4 D
2
2
16S-5 A
3
3
16S-6 A
3
3
16S-8 A
5
5
16-2
E
1
1
16-7
A
3
1 2
16-9
A
4
2 2
16-10
A
3
3
16-11
A
2
2
16-12
A
1
1
16-13
A
2
2
18-1 A/Inst 10
10
18-3
D
2
2
18-4
D
4
4
18-5
D
3
2 1
18-06
6
4 2
18-6
D
1
1
18-7
B
1
1
18-8
A
8
1 7
18-9 Inst
7
2 5
18-10
A
4
4
18-11
A
5
5
18-12
A
6
6
18-13
A
4
1 3
18-14
A
2
1
1
18-15
A
4
4
18-16
C
1
1
18-17 Inst
7
2 5
18-19
A
10
10
18-20
A
5
5
18-22
D
3
3
18-24 A/Inst 10
10
18-29
A
5
5
18-30
A
5
5
18-31
A
5
5
20-2
1
1
20-3
D
3
3
20-4
D
4
4
20-6
D
3
3
20-7 D/A
8
8
Insert Service Total
Contact Size
Arran- Rating Cont0
4 8 12 16
gement
acts
20-8 Inst
6
2
4
20-9 D/A
8
1 7
20-11 Inst 13
13
20-12
A
2
1
1
20-14
A
5
2 3
20-15
A
7
7
20-16
A
9
2 7
20-17
A
6
5 1
20-18
A
9
3 6
20-19
A
3
3
20-20
A
4
1
3
20-21
A
9
1 8
20-22
A
6
3
3
20-23
A
2
2
20-24
A
4
2
2
20-25 Inst 13
13
20-27
A
14
14
20-29
A
17
17
20-30 Inst 13
13
20-33
A
11
11
20-A48
A
19
22-1
D
2
2
22-2
D
3
3
22-4
A
4
2 2
22-5
D
6
2 4
22-6
D
3
2
1
22-7
E
1
1
22-8
E
2
2
22-9
E
3
3
22-10
E
4
4
22-11
B
2
2
22-12
D
5
2
3
22-13 D/A
5
4 1
22-14
A
19
19
22-15 E/A
6
5 1
22-16
A
9
3 6
22-17 D/A
9
1 8
22-18 D/A
8
8
22-19
A
14
14
22-20
A
9
9
22-21
A
3
1
2
22-22
A
4
4
22-23 D/A
8
8
22-24 D/A
6
2 4
22-27 D/A
9
1
8
22-28
A
7
7
22-34
D
5
3 2
24-2
D
7
7
24-3
D
7
2 5
24-4
1
3
24-5
A
16
16
24-6 D/A
8
8
4
2
24-06 A
6
24-7
A
16
2 14
24-9
A
2
2
24-10
A
7
7
7
Insert Service Total
Contact Size
Arran- Rating Contgement
acts 0 4 8 12 16
24-11
24-12
A
A
9
5
24-16
24-17
24-20
24-21
24-22
24-27
24-28
28-1
28-2
28-3
28-4
28-5
28-6
28-7
28-8
28-9
28-09
28-10
28-11
28-12
28-13
28-15
28-16
28-17
28-18
28-19
28-20
28-21
28-22
28-51
32-1
32-3
D/A
D
D
D
D
E
Inst
D/A
D
E
E/D
D
D
D
E/D/A
D
A
D/A
A
A
A
A
A
B/D/A
C/D/A/Inst
B/D/A
A
A
D
D
D/A
D
7
5
11
10
4
7
24
9
14
3
9
5
3
2
12
12
9
7
22
26
26
35
20
15
12
10
14
37
6
12
5
9
D
32-5
A
32-6
32-7 INST,A
32-8
A
32B-13 D
D
32-17
A
32-22
2
23
35
30
13
4
54
36-1
36-3
36-4
36-5
36-6
36-7
36-8
36-9
36-10
36-11
36-12
36-13
36-14
36-15
36-16
36-17
38-18
36-20
36-46
36-52
40-56
40-63
22
6
3
4
6
47
47
31
48
48
48
17
16
35
47
47
31
34
27
52
85
61
D
D
D/A
A
A
A
A
A
A
A
A
E/A
D
D/A
A
A
A
A
A
A
A
A
3
2
1
3
2
2
1
4
6
3
3
3
9
9
7
24
3
6
2 12
3
2
1
2
3
2
4
2
2
3
2
1
2
7
2
2 10
6 6
5
3
4 18
26
26
35
20
15
12
4 6
10 4
37
3
12
3
2 4
2
2
3
2 16
7 28
6 24
13
4
54
3
3
4
2
4 18
3
4
1
1
7 40
1 46
2 14 14
48
48
48
2 15
5 5 6
35
7 40
7 40
2 14 14
2 2 30
27
52
85
AMPHENOL
MS And 97B Series
Insert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND
B A
A
16
B
C
12
8
0
4
A
B
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Front of
socket insert
10SL-3
A
3
16
C
10S-2
A
1
16
G
10SL-4
A
2
16
14S-1
C A
A
F
E
Front of
socket insert
B
C
12S-3
A
2
16
A
B
C
B
14S-2
Inst.
4
16
14S-1
A
3
16
B
A
14S-4
D
1
16
14S-7
A
3
16
B
D
C
A
B
C
14S-9
A
2
16
B
100 0 rotation
of 14S-2
100 0 rotation
of 14S-7
*14S-10
Inst.
4
16
*14S-12
A
3
16
B
A
C
16S-4
D
2
16
AMPHENOL
8
B
C
16S-1
A
7
16
G
E
C
A
D
B
16S-5
A
3
16
A
*Not tooled up, can be tooled up on request. Contact Factory.
*14-3
A
1
8
A
G
D
B
*16S-3
B
1
16
14S-6
Inst.
6
16
E
A
B
A
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
14S-5
Inst.
5
16
F
A
B
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
C
D
C
14S-A7
A
7
16
C
E
B
D
D
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
A
F
A
E
D
B
12-5
D
1
12
12S-4
A
1
16
16S-6
A
3
16
B
C
A
B
16S-8
A
5
16
E
*16-2
E
1
12
MS And 97B Series
Insert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND
A
B
A
C
D
H
A
A
F
J
16-9
A
2 2
12 16
16-10
A
3
12
B
D
B
C
16-11
A
2
12
16-12
A
1
4
A
C
B
*16-13
A
2
12
E
A
A
C
A
B
B
F
D
C
B
D
E
Insert arrangement
18-1
Service rating
B,C,F,G=A;Bal.=Inst.
Number of contacts
10
Contact size
16
Premating contact
F
A
E
G
D
*18-6
D
1
4
18-06
A
2 4
16 12
E
B
B
18-5
D
2 1
12 16
C
C
E
H
D
18-4
D
4
16
A
18-3
D
2
12
G
F
A
D
A
C
B
C
18-7
B
1
8
F
A
D
B
C
E
A
D
B
D
18-8
A
1 7
12 16
H
18-9
Inst.
2 5
12 16
18-10
A
4
12
D
18-11
A
5
12
E
F
A
B
B
18-12
A
6
16
C or D
A
C
B
B
E
D
B
G
D
C
D
E
A
C
C
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
A
B
B
A
I
0
4
B
C
16-7
A
1 2
8 16
C
G
8
B
C
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
12
16
*18-13
A
1 3
8 12
A
E
C
A
G
F
B
D
A
A
H
J
C
K
o
100 - rotation
of 18-9
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
*18-14
A
1 1
4 16
18-15
A
4
12
18-16
C
1
12
*18-17
Inst.
2 5
12 16
18-19
A
10
16
K
18-20
A
5
16
D
*Not tooled up, can be tooled up on request. Contact Factory.
9
AMPHENOL
MS And 97B Series
Insert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND
H
C
B
A
A
B
A
G
I
B
F
J
C
C
D
E
E
E
H
20-3
D
4
12
A
A
A
H
G
F
B
B
B
H
C
F
B
20-2
D
1
0
-
C
B
G
B
C
*18-31
A
5
16
C
A
C
A
260 rotation
of 18-20
110 rotation
of 18-20
*18-30
A
5
16
C
*18-29
A
5
16
D
A
A
0
0
-
0
-
*18-24
B,C,F,G=A;Bal.=Inst.
10
16
D
4
D
D
250 - rotation
of 18-1
18-22
D
3
16
C
8
B
A
C
D
o
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
B
A
12
C
E
E
16
G
J
C
F
C
C
E
B
D
E
A
D
D
E
F
D
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
20-4
D
4
12
C or D
L
B
E
M
N
20-7
A,B,H,G=D;C,D,E,F=A
8
16
A
*20-6
D
3
16
A
G
F
A
D
D
G
E
A
B
H K
20-9
H=D;Bal.=A
1 7
12 16
H
I
D
C
D
20-11
Inst.
13
16
A
H
G
F
D
B
C
B
C
F
20-18
A
3 6
12 16
D
20-19
A
3
8
C
20-20
A
1 3
4 12
A
*Not tooled up, can be tooled up on request. Contact Factory.
AMPHENOL
10
20-16
A
2 7
12 16
E
A
F
C
B
20-17
A
5 1
12 16
E or F
F
A
H
G
B
D
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
A
C
E
20-15
A
7
12
A or D
A
A
I
D
B
20-14
A
2 3
8 12
D
*20-12
A
1 1
4 16
H
C
C
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
E
G
E
B
B
J
20A - 9
A
9
12
F
A
F
E
A
C
20-8
Inst.
2 4
8 16
A
B
I
E
C
D
E
A
B
D
B
C
*20-21
A
1 8
12 16
1
20-22
A
3 3
8 16
20-23
A
2
8
MS And 97B Series
Insert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND
L
A
J
B
N G
B
D
F
A
D
K
I
M
J
L
F
C
0
L
C
E
F
N G
P
S
C
B
M
D
T
H K
E
A
D
R
J
D
4
B
N
K
E
G
C
A
L
H
8
M
B
N
H K
12
A
C
E
M
16
J
F
H
G
_
0
100 rotation
of 20-11
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
20-24
A
2 2
8 16
*20-25
Inst.
13
16
B
M
U
K
C
H
*20-30
Inst.
13
16
B
D
P
C
J
D
H
E
R
S
A
A
N
V
T
L
F
20-29
A
17
16
G
20-27
A
14
16
M
L M A
A
K
J
o
250 rotation
of 20-11
B
A
C
B
B
C
D
G F E
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
20-33
A
11
16
E
F
20 A - 48
A
19
16
22-2
D
3
8
A
*22-4
A
2 2
8 12
C
A
A
E
22-1
D
2
8
A
B
B
B
A
C
C
D
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
22-5
D
2 4
12 16
D
22-7
E
1
0
*22-6
D
2 1
8 16
B
A
E
B
C
22-9
E
3
12
A
*22-8
E
2
12
A
D
B
K
A
J
U
C
C
22-12
D
2 3
8 16
A
22-13
E=D;A,B,C,D=A
4 1
12 16
E
C
R
H
D
G
22-11
B
2
16
B
P
S
B
A
N
Y
T
B
22-10
E
4
16
C
M
L
A
D
E
D
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
B
C
F
E
22-14
A
19
16
A
*Not tooled up, can be tooled up on request. Contact Factory.
11
AMPHENOL
MS And 97B Series
Insert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND
16
12
8
A
F
H
G
B
F
C
C
Insert arrangement
22-15
Service rating
D=E;A,B,C,E,F=A
Number of contacts
5 1
Contact size
12 16
Premating contact
D
E
D
E
22-16
A
3 6
12 16
D
*22-17
A=D;Bal.=A
1 8
12 16
E
D
B
22-19
A
14
16
F
E
B
H
E
F
A
F
22-27
J=D;Bal.=A
1 8
8 16
A
B
B
G
E
E
D
22-28
A
7
12
G
C
A
C
D
D
B
G
E
C
B
24-4
A
D
D
C
H
J
D
C
A
H
F
B
K
M
L
G
B
E
G
F
C
D
F
22-24
C,D,E=D;A,B,F=A
2 4
12 16
D
B
C
G
22-23
H=D;Bal.=A
8
12
A or D
G
E
C
D
22-22
A
4
8
C or D
A
B
J
D
C
*22-21
A
1 2
0 16
22-20
A
9
16
D
F
B
E
B
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
D
A
F
F
H
C
C
F
A
A
A
B
E
E
C
22-18
A,B,F,G,H=D;C,D,E=A
8
16
D
G
A
C
D
G
D
A
J
F
N
D
H
G
C
M
H
B
F
J
F
E
D
P
0
B
L
J
H
C
J
A
K
A
G
A
G
E
B
A
H
B
4
N
A
P
E
D
C
R
S
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
*22-34
D
3 2
12 16
E
24-2
D
7
12
A
*24-3
D
2 5
12 16
D
*Not tooled up, can be tooled up on request. Contact Factory.
AMPHENOL
12
24-4
A
3 1
16 0
-
24-5
A
16
16
S
24-6
A,G,H=D;Bal.=A
8
12
D
MS And 97B Series
Insert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND
D
E
A
L
A
K
J
12
8
F
B
C
M
P
16
0
A
A
B
C
A
B
E
N
4
B
G
D
D
E
F
O
E
I
D
B
C
24-06
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
24-7
A
2 14
12 16
G
24-9
A
2
4
D
E
B
A
*24-16
A,B,F,G=D;C,D,E=A
1 3 3
8 12 16
G
24-12
A
2 3
4 12
D
*24-17
D
2 3
12 16
D
A
A
A
F
B
E
K
G
C
B
E
F
L
B
G
M
C
H
N
E
E
D
H
A
24-21
D
1 9
8 16
E
K
B
Q
J
G
C
R
S
T
W X
U
V
P
Y
Z
G
F
B
M
24-28
Inst.
24
16
*24-27
E
7
16
D
C
D
N
D
E
24-22
D
4
8
D
H
A
L
J
C
D
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
D
24-20
D
2 9
12 16
A
J
P
K
F
D
F
B
C
J
L
G
D
A
H
G
C
K
C
24-11
A
3 6
8 12
E
B
H
G
E
C
A
J
C
B
F
24-10
A
7
8
D or E or G
D
A
A
B
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
I
H
G
24-06
A
2 4
16 8
E
G
C
F
H
28-1
A,J,E=D;Bal.=A
3 6
8 12
E
E
F
*28-2
D
2 12
12 16
E
*Not tooled up, can be tooled up on request. Contact Factory.
13
AMPHENOL
MS And 97B Series
Insert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND
16
12
8
4
0
A
A
S
A
B
A
B
E
C
P
C
D
C
B
B
E
G
F
C
D
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
28-3
E
3
8
A
*28-5
D
2 1 2
4 12 16
*28-4
G,S,P=E;Bal.=D
2 7
12 16
E
J
H
H
A
A
G
M
A
B
28-6
D
3
4
A
B
F
L
C
A
K
G
B
M
B
D
L
C
D
28-7
D
2
4
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
U
G
B
V
W
X
P
R
S
L
N
A
F
B
M
C
L
H
D
Z
X
J
C
U
N
G
C
D
E
F
b
Z
M
A
B
S
a
T
d
V
W
H
R
P
B
T
d
Y
K
A
b
H
G
28-09
A
5 4
16 4
S
a
G
T M I
D
R
P
E
K
J
D
28-9
D
6 6
12 16
E
J
N
E
E
28-8
L,M=E;B=D;Bal.=A
2 10
12 16
D
A
F
F
E
C
F
E
L Y
K
X
U
H
G
o
F
100 rotation
of 28-12
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
28-10
G=D;Bal.=A
2 2 3
4 8 12
G
28-11
A
4 18
12 16
M
*Not tooled up, can be tooled up on request. Contact Factory.
AMPHENOL
14
28-12
A
26
16
H
*28-13
A
26
16
H
D
E
W
J
C
V
MS And 97B Series
Insert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND
A
J
H
A
B
E
D
C
L
K
M
e
f
g
N
M
H
C
S
H
V
N
U
R
Q
P
G
F
E
8
4
E
0
A
L
B
K
L
F
K
C
R
M
P
J
M
D
N
E
H
k
l
F
m
G
28-15
A
35
16
M
28-16
A
20
16
F
J
A
N
K
A
B
G
28-19
H,M=B;A,B=D;Bal.=A
4 6
12 16
H
D
A
F
N
V
P
W
R
X
Z
a
b
c
d
e
Y
B
f
g
l
h
m
j
k
n
p
E
28-21
A
37
16
A
A
B
J
M
U
28-20
A
10 4
12 16
E
A
H
L
T
E
K
C
G
K
S
D
H
N
F
C
L
M
G
F
H
E
P
E
M
J
J
B
C
H
C
K
28-18
M=C;G,H,J,K,L=D;A,B=ABal.=Inst.
12
16
*28-17
R=B;M,N,P=D;A to L=A
15
16
N
B
A
L
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
C D
J
12
D
h
j
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
L
T
A G
PX R Y S Z T a U b V c W
d
B
B
K
J
G
F
16
A
E
B
B
D E
L
D
28-22
D
3 3
4 16
C
F
M
F
C
G
D
E
D
J
C
H
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
28-51
D
12
12
32-1
A=E;B,C,D,E=A
2 3
0 12
*32-3
D
1 2 2 4
0 4 12 16
32-5
D
2
0
*Not tooled up, can be tooled up on request. Contact Factory.
15
AMPHENOL
MS And 97B Series
Insert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND
A
B
G
H
K
L
P
W
X
J
M
N
S Z
T
O
h
R
K
S
L
F
e
j
X
W
f
g
X
Z
T
a
U
4
0
A
G
B
M
k
Y
V
U
8
E
R
d
Y
12
J
c
F
I
P
W
D
C
E
16
H
C
N
D
I
b
V
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
O
32-7
INST , A
4 24 7
16
12
32-6
A
16 2 3 2
16 12 8 4
A
M
T
Y
D
N
c
Z
V
P
a
e
X
e
i
l
AA
z
AD
10
1
A
B
C
E
F
G
A
F
D
11
13
H
B
2
12
J
I
8
K
L
M
N
E
3
32B13
O
7
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
5
32B-13
D
13
8
R
S
U
V
W
*36-1
D
4 18
12 16
*Not tooled up, can be tooled up on request. Contact Factory.
AMPHENOL
P
T
D
C
4
6
AC
AE
AG
32-22
A
54
16
32-17
D
4
4
32-8
A
6 24
12 16
S
9
w
y
AF
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
r
v
AB
B
C
16
f
j
n
m
x
S
W
a
Z
d
h
o
L
X
R
Y
Y
c
k
C
G
R
P
U
g
F
K
W
b
J
M
O
T
b
B
J
H
L
N
E
O
d
G
K
S
B
D
F
A
I
U
C
A
D
H
36-3
D
3 3
0 12
MS And 97B Series
Insert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND
16
12
8
4
0
A
A
A
B
F
B
D
C
B
E
C
C
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
36-4
A=D;B,C=A
3
0
A
C
K
O
P
R
V
a
h
Y
d
Z
e
S
T
b
f
W
x
A
H
O
V
J
P
W
d
K
Q
X
e
l
Y
m
t
R
f
N
a
p
H
U
b
j
r
w
C
T
h
v
y
M
Z
n
G
S
g
u
A
F
L
O
c
V
k
s
J
P
W
d
r
f
Q
e
n
z
y
M
j
c
k
s
x
V
D
J
P
W
d
Q
X
R
f
m
t
F
L
Y
e
l
B
E
K
Z
n
N
T
a
h
p
v
y
G
M
S
g
u
z
100 rotation
of 36-10
*36-11
A
48
16
A
36-10
A
48
16
A
O
U
b
r
w
H
N
a
p
C
T
h
v
G
N
A
Z
C
F
L
T
G
S
g
u
X
c
*36-9
A
1 2 14 14
4 8 12 16
P
F
L
Y
m
t
R
B
R
f
K
W
b
w
z
E
K
X
l
x
D
o
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
B
e
*36-8
A
1 46
12 16
Y
B
E
H
t
y
A
P
e
p
v
E
J
V
j
u
*36-7
A
7 40
12 16
x or y
D
k
n
s
D
I
O
Y
a
d
h
M
U
a
d
L
R
V
Z
m
y
C
Y
g
z
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
K
P
U
M
c
f
s
y
S
Z
H
X
b
m
p
vv
w
r
J
O
T
N
S
c
g
k
u
I
X
j
n
N
36-6
A
2 4
0 4
C
E
F
G
W
l
A
B
D
E
G
J
M
I
U
36-5
A
4
0
B
D
F
H
L
D
j
r
w
U
b
c
k
s
x
z
o
250 rotation
of 36-10
*36-12
A
48
16
A
*Not tooled up, can be tooled up on request. Contact Factory.
17
AMPHENOL
MS And 97B Series
Insert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND
16
12
8
4
0
A
J
P
S
R
B
N
K
L
P
P
M
R
S
H
B
E
W
g
Y
X
F
G
K
J
E
D
V
f
h
Z
G
E
F
e
m
L
D
G
D
M
C
Q
H
a
M
N
J
C
U
j
b
N
L
T
d
k
c
C
Q
A
K
A
B
Q
I
H
F
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
A
D
C
F
H
L
P
K
O
U
Y
d
h
Z
e
B
E
I
R
V W
l
w
u
F
H
L
P
U
X
Y
d
c
g
k
v
h
m
Z
e
S
E
R
V W
G
J
M
S
N
T
l
w
g
v
I
J
B
f
b
W
c
X
K
R
T
A
C
H
P
R
X
d
D
J
Y
T
Z
*36-16
A
7 40
12 16
x or y
*36-17
A
7 40
12 16
x or y
*36-18
A
1 2 14 16
4 8 12 16
A
U
N
V
b
e
J
W
R
H
P
N
A
E
F
L
M
L
E
T
K
g
W
U
V
T
B
F
M
U
C
H
N
V
D
J
P
W
A
X
Y
S
b
j
c
k
d
m
f
n
g
p
h
t
AC
Z
d
Y
c
s
X
t
u
v
w
i
j
u
v
z
AA AB AC
AD AE AF AH
M
V
U
d
c
W
f
p
n
g
r
p
AD
AE
AF
w
x
y
z
AH
AJ
AK
AL
AA
Z
s
AB
AM
AN
x
AP
y
b
b
m
k
L
K
T
h
r
j
m
i
J
S
a
Z
D
C
H
R
Y
X
Z
q
P
N
S
B
F
E
K
R
W
a
a
k
B
G
c
f
h
C
D
G
M
a
AR
AZ
AS
BA
BJ
AT
BB
BK
X
AU
BC
LB
BS
AV
BT
AW
BD
BM
BE
BN
BU
AX
BF
BP
BV
AY
BH
BR
Y
40 - 56
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
*36-20
A
2 2 30
8 12 16
k
36-46
A
27
16
36-52
A
52
16
*Not tooled up, can be tooled up on request. Contact Factory.
AMPHENOL
G
100orotation
of 36-9
F
L
F
250 rotation
of 36-7
B
E
K
S
o
L
N
100 rotation
of 36-7
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
18
A
H
p
z
o
D
E
e
s
y
V
M
O
Y
m
y
z
U
a
P
c
k
u
d
Z
X
b
f
a
r
y
y
B
I
j
n
p
s
r
A
D
C
K
O
N
T
b
f
a
j
n
G
J
M
S
*36-15
M=D;Bal=A
35
16
J
*36-14
D
5 5 6
8 12 16
*36-13
N,P,Q=E;Bal.=A
2 15
12 16
40-56
A
85
16
40-63
A
61
16
C
MS And 97B Series
Shell Types
Wall mounting receptacle
MS-3100
MOUNTING HOLES
4.39 DIA. FOR SIZE 32 AND 36
3.73 DIA. FOR SIZE 24 AND 28
3.05 DIA. FOR ALL OTHER SIZES
4.55 DIA. FOR 40 SIZE
MS-4100
M
K
V
S
R
S
PANEL OPENING
R
A
All dimensions are in mm
Connector
Size
A
Thread
in inches
K
M
O
R
S
V
Thread
in inches
10SL
12S
12
14S
14
16S
16
18
20
22
24
28
32
36
40
5/8-24 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1-20 UNEF
1 1/8-18 UNEF
1 1/4-18 UNEF
1 3/8-18 UNEF
1 1/2-18 UNEF
1 3/4-18 UNS
2.00-18 UNS
2 1/4-16 UN
2 1/2-16 UN
1.98
1.98
1.98
1.98
1.98
1.98
3.17
3.17
3.17
3.17
3.17
3.17
3.17
3.17
3.45
14.29
14.29
19.05
14.29
19.05
14.29
19.05
19.05
19.05
19.05
20.64
20.64
22.25
22.22
22.22
20.62
20.62
20.62
23.82
23.82
26.97
26.97
30.17
33.32
36.52
39.67
46.02
53.0
58.72
62.00
18.25
20.64
20.64
23.02
23.02
24.61
24.61
26.99
29.37
31.75
34.92
39.69
44.45
49.21
55.58
25.68
27.76
27.76
30.43
30.43
32.82
32.82
35.07
38.38
41.55
44.70
51.08
57.15
63.78
69.85
5/8-24 NEF
11/16-24NEF
11/16-24NEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
1 7/8-16UN
2 1/16-16UN
2 5/16-16 UN
Cable Connecting Receptacle
MS-3101
MS-4101
V
A
All dimensions are in mm
Connector
Size
A
Thread
in inches
V
Thread
in inches
10SL
12S
12
14S
14
16S
16
18
20
22
24
28
32
36
40
5/8-24 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1-20 UNEF
1 1/8-18 UNEF
1 1/4-18 UNEF
1 3/8-18 UNEF
1 1/2-18 UNEF
1 3/4-18 UNS
2-18 UNS
2 1/4-16 UN
2 1/2-16 UN
5/8-24 NEF
11/16-24 NEF
11/16-24 NEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
1 7/8-16UN
2 1/16-16UN
2 5/16-16 UN
19
AMPHENOL
MS And 97B Series
Shell Types
Box mounting receptacle
MS-3102
MOUNTING HOLES
4.39 DIA. FOR SIZE 32 AND 36
3.73 DIA. FOR SIZE 24 AND 28
3.05 DIA. FOR ALL OTHER SIZES
4.55 FOR 40 SIZE
MS-4102
L
S
N
R
S
M
K
R
A
All dimensions are in mm
Connector
Size
A
Thread
in inches
K
L
M
N
R
S
10SL
12S
12
14S
14
16S
16
18
20
22
24
28
32
36
40
5/8-24 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1-20 UNEF
1 1/8-18 UNEF
1 1/4-18 UNEF
1 3/8-18 UNEF
1 1/2-18 UNEF
1 3/4-18 UNS
2-18 UNS
2 1/4-16 UN
2 1/2-16 UN
1.98
1.98
1.98
1.98
1.98
1.98
3.17
3.17
3.17
3.17
3.17
3.17
3.17
3.17
3.45
30.18
30.18
41.28
30.18
41.28
30.18
41.28
49.28
49.28
49.28
49.28
49.28
49.28
49.28
49.28
13.89
14.28
19.05
14.28
19.05
14.28
19.05
19.05
19.05
19.05
20.64
20.64
22.22
22.22
22.22
15.87
17.46
17.46
19.05
19.05
22.22
22.22
25.40
28.57
31.75
34.92
41.27
48.26
53.97
58.25
18.25
20.64
20.64
23.02
23.02
24.61
24.61
26.99
29.37
31.75
34.92
39.69
44.45
49.21
55.58
25.68
28.04
28.04
30.43
30.43
32.82
32.82
35.08
38.38
41.55
44.73
51.08
57.15
63.78
69.85
Straight Plug
MS-3106
Q
MS-4106
V
A
All dimensions are in mm
Connector
Size
A
Thread
in inches
Q
max
V
Thread
in inches
10SL
12S
12
14S
14
16S
16
18
20
22
24
28
32
36
40
5/8-24 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1-20 UNEF
1 1/8-18 UNEF
1 1/4-18 UNEF
1 3/8-18 UNEF
1 1/2-18 UNEF
1 3/4-18 UNS
2-18 UNS
2 1/4-16 UN
2 1/2-16 UN
19.05
19.84
19.84
22.22
22.22
25.40
25.40
28.57
31.75
34.92
38.10
44.45
51.75
57.15
63.50
5/8-24 NEF
11/16-24NEF
11/16-24NEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
1 7/8-16UN
2 1/16-16UN
2 5/16-20 UN
Note - Both versions, straight and diamond knurling available on coupling ring. For details, contact factory.
AMPHENOL
20
MS And 97B Series
Shell Types
Right angle plug
MS-3108
MS-4108
Q max
A THREAD
V
All dimensions are in mm
Connector
Size
A
Thread
in inches
Q
max
V
Thread
in inches
10SL
12S
12
14S
14
16S
16
18
20
22
24
28
32
36
5/8-24 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1-20 UNEF
1 1/8-18 UNEF
1 1/4-18 UNEF
1 3/8-18 UNEF
1 1/2-18 UNEF
1 3/4-18 UNS
2-18 UNS
2 1/4-16 NS
19.05
19.84
19.84
22.22
22.22
25.40
25.40
28.57
31.75
34.92
38.10
44.45
51.75
57.15
5/8-24 NEF
11/16-24 NEF
11/16-24 NEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
1 29/32-18 NS
2 1/16-20 UNS
40
2 1/2-16 UN
63.50
2 5/16-16 UN
Note - Both versions, straight and diamond knurling available on coupling ring. For details, contact factory.
Shell Types
Box mounting receptacle
S
R
A
97B-3100 97B-4100
R
K
V
MOUNTING HOLES
4.39 DIA. FOR SIZE 32 , 36 AND 40
3.73 DIA. FOR SIZE 24 AND 28
3.05 DIA. FOR ALL OTHER SIZES
S
M
All dimensions are in mm
A
K
M
R
S
V
Thread
in inches
10SL
14S
16S
16
18
20
22
24
28
32
36
18.2
24.6
27.4
27.4
30.8
34.2
37.4
40.9
46.7
53.4
59.6
2.8
3.2
3.2
3.2
4.0
4.0
4.0
4.0
4.0
4.0
4.0
14.2
14.2
14.2
19.0
19.0
19.0
19.0
20.6
20.6
22.2
22.2
18.2
23.0
24.6
24.6
27.0
29.4
31.8
34.9
39.7
44.5
49.2
25.4
30.0
32.5
32.5
35.0
38.0
41.0
44.5
50.8
57.0
63.5
5/8-24 NEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-24 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
1 7/8-16UN
2 1/16-16UN
40
65.5
4.0
22.2
55.5
69.85
2 5/16-16 UN
Connector
Size
21
AMPHENOL
MS And 97B Series
97B-4101
A
97B-3101
Q
M
Cable Connecting Receptacle
K
V
All dimensions are in mm
Connector
Size
10SL
14S
16S
16
18
20
22
24
28
32
36
40
A
K
M
18.2
24.6
27.4
27.4
30.8
34.2
37.4
40.9
46.7
53.4
59.6
65.5
2.8
3.2
3.2
3.2
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
14.2
14.2
14.2
19.0
19.0
19.0
19.0
20.6
20.6
22.2
22.2
22.2
V
Thread
in inches
5/8-24 NEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-24 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
1 7/8-16UN
2 1/16-16UN
2 5/16-16 UNS
Shell Types
MOUNTING HOLES
4.39 DIA. FOR SIZE 32 ,36 AND 40
3.73 DIA. FOR SIZE 24 AND 28
3.05 DIA. FOR ALL OTHER SIZES
Front box mounting receptacle
97B-3102 97B-4102
M
S
R
A
N
S
R
K
L
All dimensions are in mm
Connector
Size
10SL
14S
16S
16
18
20
22
24
28
32
36
40
AMPHENOL
A
K
M
R
S
18.2
24.6
27.4
27.4
30.8
34.2
37.4
40.9
46.7
53.4
59.6
65.5
2.8
3.2
3.2
3.2
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
14.2
14.2
14.2
19.0
19.0
19.0
19.0
20.6
20.6
22.2
22.2
22.2
18.2
23.0
24.6
24.6
27.0
29.4
31.8
34.9
39.7
44.5
49.2
55.5
25.4
30.0
32.5
32.5
35.0
38.0
41.0
44.5
50.8
57.0
63.5
69.85
22
N
max
L
max
15.9
19.2
22.4
22.4
25.6
29.0
32.2
35.3
41.4
47.8
52.4
58.70
24.7
24.7
24.7
33.8
34.5
34.5
34.5
35.7
35.7
37.3
37.3
37.3
MS And 97B Series
Back Box Mounting Receptacle
97B-3103X* / 97B-4103X*
M
‘L’
R
A
S
R
K
V
S
97B-3103 / 97B-4103
MOUNTING HOLES
4.39 DIA. FOR SIZE 32 , 36 AND 40
3.73 DIA. FOR SIZE 24 AND 28
3.05 DIA. FOR ALL OTHER SIZES
* Replace X with Required Class
All dimensions are in mm
A
K
M
R
S
V
Thread
in inches
18.2
24.6
27.4
27.4
30.8
34.2
37.4
40.9
46.7
53.4
59.6
65.5
2.8
3.2
3.2
3.2
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
18.2
18.2
18.2
21.5
23.05
23.05
23.05
23.05
24.05
24.05
24.05
24.05
18.2
23.0
24.6
24.6
27.0
29.4
31.8
34.9
39.7
44.5
49.2
55.5
25.4
30.0
32.5
32.5
35.0
38.0
41.0
44.5
50.8
57.0
63.5
69.85
5/8-24 NEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-24 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
1 7/8-16UN
2 1/16-16UN
Connector
Size
10SL
14S
16S
16
18
20
22
24
28
32
36
40
L
REF.
27.60
33.81
35.71
37.31
2 5/16-16 UN-2A
Shell Types
Straight plug
97B-3106 97B-4106
Q
V
All dimensions are in mm
Connector
Size
10SL
14S
16S
16
18
20
22
24
28
32
36
40
Q
max
V
Thread
in inches
22.8
29.2
32.0
32.0
36.5
39.9
43.1
46.6
53.4
60.1
66.3
69.10
5/8-24 NEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
1 7/8-16UN
2 1/16-16UN
2 5/16-16 UN
23
AMPHENOL
MS And 97B Series
L
Right Angle Plug
97B-3108 97B-4108
Q max
K
V
All dimensions are in mm
Connector
Size
10SL
14S
16S
16
18
20
22
24
28
32
36
40
Q
max
V
Thread
in inches
L
max
K
max
22.8
29.2
32.0
32.0
36.5
39.9
43.1
46.6
53.4
60.1
66.3
69.10
5/8-24 NEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
1 29/32-18 NS
2 1/16-20 UNS
2 5/16-16 UN
45
47
48
57
58
61
61
66
66
72
75
78
30
30
30
35
35
35
35
40
40
45
50
55
Note - Both versions, straight and diamond knurling available on coupling ring. For details, contact factory.
Shell Types
Jam nut receptacle
97B - 3107R 97B-4107R
L
K
S
H
NUT
236 MAX.
PANEL THICKNESS
D
W
A
S
O-RING
B THREAD
G
M
J
All dimensions are in mm
Shell
Size
A
Ref.
D
Ref.
G
Ref.
H
Ref.
J
Ref.
K
Ref.
L
Ref.
M
Ref.
S
+- 0.3
W
Ref.
10SL
14S
16S
16
18
20
22
24
28
32
36
18.2
24.6
27.4
27.4
30.8
34.1
37.3
40.8
46.7
53.3
59.6
2.5
2.5
2.5
2.5
3.0
3.0
3.0
3.0
3.0
3.0
3.0
35.0
41.3
44.4
44.4
48.2
52.4
55.5
59.0
66.0
72.0
80.0
31.5
37.9
41.0
41.0
44.8
49.0
52.2
55.0
62.0
68.0
75.0
13.5
13.5
13.5
13.5
15.0
15.0
15.0
15.0
15.0
15.0
15.0
3.2
3.2
3.2
3.2
4.0
4.0
4.0
4.0
4.0
4.0
4.0
29.2
29.2
29.2
37.7
40.0
40.0
40.0
40.0
40.0
40.0
40.0
12.5
12.5
12.5
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
31.8
38.1
41.2
41.2
45.0
49.2
52.4
55.2
62.2
68.2
75.2
5.0
6.0
6.0
6.0
7.0
7.0
7.0
7.0
7.0
7.0
8.0
AMPHENOL
24
MS And 97B Series
Shell Types
Jam nut receptacle
97B - 3107 97B-4107
L
S
G
M
J
P
G
S
N
R
V
B
O-Ring
All dimensions are in mm
Shell
Size
G
+- 0.3
10SL
14S
16S
16
18
20
22
24
28
32
36
40
11.2
14.6
15.7
15.7
16.8
18.0
20.0
20.2
22.5
24.7
26.9
29.6
J
Wall Thickness
Min.
Max.
2.4
5.2
2.4
7.5
2.4
7.5
2.4
7.5
2.4
9.0
2.4
9.1
2.4
9.1
2.4
9.1
2.4
10.0
2.4
10.0
2.4
8.3
2.4
8.3
L
+- 0.3
M
+- 0.3
36.2
38.9
38.9
48.5
49.3
49.3
49.3
49.6
51.9
51.9
51.9
51.9
24.5
26.8
26.8
32.1
33.7
33.7
33.7
33.7
35.2
35.2
35.2
35.2
N
+0.00
-0.15
18.2
24.6
27.4
27.4
30.8
34.2
37.4
40.9
46.7
53.4
59.6
65.5
Shell Types
Panel mounting plug connector
97B - 3110X 97B-4110X
L3
P
+- 0.2
R
+-0.4
S
+- 0.3
Thread
in inches
4.0
4.8
4.8
4.8
4.8
4.8
4.8
4.8
5.6
5.6
5.6
5.6
27
33
38
38
40
44
51
51
56
62
71
76
31.8
41.3
44.4
44.4
47.6
50.8
57.2
57.2
63.5
69.8
76.2
82.5
5/8-24 NEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
1.7/8-16UN
2 1/16-20 UNS
2 5/16-16 UN
e
LP
L4
L4
d2
e
L1
All dimensions are in mm
Shell
Size
10SL
14S
16S
16
18
20
22
24
28
32
36
40
d1
d2
Max
H13
22.8
29.2
32
32
36.5
39.9
43.1
46.6
53.4
60.1
66.3
72.5
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.7
3.7
4.3
4.3
4.3
e
+- 0.1
18.2
23
24.6
24.6
27
29.4
31.8
34.9
39.7
44.5
49.2
55.5
25
l1
~
28.1
28.1
28.1
37.6
38.6
38.6
38.6
41
41.8
45
45
45
l3
+- 0.2
l4
+- 0.3
2.8
3.2
3.2
3.2
4
4
4
4
4
4
4
4
25.4
30
32.5
32.5
35
38
41
44.5
50.8
57
63.5
69.9
AMPHENOL
MS And 97B Series
Back Accessories
Solid backshell without grommet and sleeve
Class A
Q
L
V
A
All dimensions are in mm
A Thread
in inches
L max
for MS
L max
for 97B
Q
max
V
Thread
in inches
5/8-24 NEF
11/16-24 NEF
11/16-24 NEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
1 7/8-16UN
2 1/16-16UN
32.54
37.31
46.83
36.51
46.83
37.70
48.02
50.80
53.97
53.97
57.15
57.15
59.0
60.32
71.80
37.60
----37.64
--38.83
48.00
51.58
54.75
54.75
57.94
57.94
59.78
61.13
80.00
19.05
19.84
19.84
22.22
22.22
25.40
25.40
28.57
31.75
34.92
38.10
44.45
51.75
57.15
63.50
5/8-24 UNEF
5/8-24 UNEF
5/8-24 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18 UNEF
1 3/16-18 UNEF
1 7/16-18 UNEF
1 7/16-18 UNEF
1 3/4-18 UNS
2-18 UNS
2 1/4 - 16 UN
Connector
Size
10SL
12S
12
14S
14
16S
16
18
20
22
24
28
32
36
40
2 5/16-16 UN
Solid Backshell With Grommet & Sleeve
Class R
Q
L
A
All dimensions are in mm
Connector
Size
10SL
12S
12
14S
14
16S
16
18
20
22
24
28
32
36
40
A Thread
class 2B
in inches
5/8-24 NEF
11/16-24 NEF
11/16-24 NEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
1 7/8-16UN
2 1/16-16UN
2 5/16-16 UN
For Plug type
L max
for MS
47
47
55
47
55
47
55
57
57
57
57
57
58.25
58.25
58.25
For Receptacle
L max
for 97B
48
----48
--48
56
57
57
57
57
57
60
60
60
Note - Both versions, straight and diamond knurling available on back accessories. For details, contact factory.
AMPHENOL
26
Q
max
21.50
20.35
20.35
23.40
23.40
26.71
26.71
29.50
35.70
35.85
44.40
45.08
52.36
56.81
64.50
MS And 97B Series
Back Accessories
Strain relief backshell with grommet and sleeve
Class E and F
N
L
A
All dimensions are in mm
A Thread
class 2B
in inches
L max
for MS
L max
for 97B
N
max
5/8-24 NEF
11/16-24 NEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
1 7/8-16UN
2 1/16-16UN
54.07
54.07
55.90
55.90
64.41
65.94
67.41
67.41
73.28
73.28
74.75
74.75
86.0
59.10
--61.34
62.86
21.97
21.97
25.15
28.45
28.45
30.76
37.29
37.29
44.45
44.45
52.22
57.15
67.10
Connector
Size
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
40
2 5/16-16 UN
71.10
72.55
72.55
76.82
77.82
77.64
125.0
Right Angle Backshell With Or Without Grommet
Class A, F & R
L1
Q
L
A
V
All dimensions are in mm
Connector
Size
A Thread
class 2B
in inches
L max
for MS
L max
for 97B
L1
max
Q
max
V
Thread
in inches
10SL
12S
12
14S
14
16S
16
18
20
22
24
28
32
36
40
5/8-24 NEF
11/16-24 NEF
11/16-24 NEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
1 7/8-16UN
2 1/16-16UN
2 5/16-26 UN
37.60
37.80
47.30
39.40
48.90
42.60
52.10
53.70
58.80
58.80
63.60
63.60
69.60
72.80
76.00
45.00
----47.00
--48.00
57.00
58.00
61.00
61.00
66.00
66.00
72.00
75.00
78.00
25.00
25.00
25.00
27.00
27.00
28.00
28.00
31.00
34.00
34.00
37.00
39.00
45.00
48.00
55.00
22.22
25.40
25.40
28.57
28.57
31.75
31.75
34.13
37.30
40.48
43.66
50.00
56.50
62.71
62.71
5/8-24 UNEF
5/8-24 UNEF
5/8-24 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18 UNEF
1 3/16-18 UNEF
1 7/16-18 UNEF
1 7/16-18 UNEF
1 3/4-18 UNS
2-18 UNS
2 1/4 -16 UN
Note - Both versions, straight and diamond knurling available on back accessories. For details, contact factory.
27
AMPHENOL
MS And 97B Series
‘O’ Ring
G
PG
B
A
PG Adaptor
L
Shell
size
G Thread
in inches
10SL
12S
14
16
18
20
22
24
28
36
5/8-24
11/16-24
3/4-20
7/8-20
1-20
1 1/8-18
1 1/4-18
1 3/8-18
1 5/8-18
2 1/8-18
PG 9
A
30
B
21
PG 11
L
26
PG 13
PG 16
A
B
L
A
B
L
23
25
30
35
23
25
26
26
30
30
37
40
23
23
30
PG 21
A
B
L
25
30
35
35
25
28
28
28
30
37
40
40
PG 29
A
B
L
35
35
38
45
35
35
35
37
40
40
40
45
A
B
L
A
B
L
40
45
57
40
45
44
40
45
55
57
57
55
Ordering Information
MS - XX-PGYY
Where XX- Shell Size
YY-PG-Thread Size
EGM/PHM
Backshell Accessories
L
G
‘O’ RING
EGM INNER METAL FERRULE
PLASTIC CDMB
RUBBER BUSH
D
GLAND NUT
EGM BACKSHELL
Shell size
G Thread in inches
10SL
5/8”-24
11/16”-24
3/4”-20
7/8”-20
1”-20
1.1/8”-18
1.1/4”-18
1.3/8”-18
1.29/32”-18
2.1/6”-18
12SL
14
16
18
20
22
24
32
36
EGM/PHM 11
D
25.00
25.00
25.00
25.00
29.00
31.50
L
37.00
37.00
37.00
40.00
40.00
52.00
35.00
35.00
52.00
52.00
60.00
60.00
70.00
70.00
Note:- Rubber Bush supplied in Packing
In case of PHM inner metal Furrele is not required/supplied
EGM/PHM11 Can accept cable Min. 5.70 mm & Max. 10.85 mm
EGM/PHM21 Can accept cable Min. 12.70 mm & Max. 17.85 mm
AMPHENOL
28
EGM/PHM 21
D
27.00
27.00
27.00
27.00
31.00
33.50
35.00
35.00
52.00
52.00
L
41.00
41.00
41.00
43.00
43.00
55.00
60.00
60.00
70.00
70.00
PG 36
MS And 97B Series
Heat Shrink
Boot adaptor (G)
C
A
B
3.50+0.20
L
B
L Max.
C- THD
20.30
30.00
5/8-24 NEF
22.30
27.00
3/4-20 UNEF
13.50
24.80
29.50
7/8-20 UNEF
14.60
18.70
20.80
24.60
27.00
33.30
38.50
48.20
28.50
Shell size
A Min.
10SL
7.70
8.20
10.60
12S
14S
16S
16
18
20
22
24
28
32
36
40
1-20 UNEF
1 1/8-18 NEF
1 1/4-18 UNEF
1 3/8-18 NEF
1 5/8-18 NEF
1 7/8-16 UN
2 1/16-16 UN
2 5/16-16 UN
33.50
34.50
35.10
41.00
44.80
51.50
56.00
62.00
35.70
34.00
34.10
34.20
34.20
36.60
Back Accessories
Cable clamp
MS-3057
Use MS-3420 sleeves
B
C
A
All dimensions are in mm
Part number
Shell
size
Max OD
of cable
A
B
C
Thread
in inches
MS-3057-4A
10SL, 12S
5.59
20.90
21.39
7.94
5/8-24
MS-3057-6A
14, 14S
7.92
21.59
25.27
11.11
3/4-20
MS-3057-8A
16, 16S
11.10
23.37
28.45
14.29
7/8-20
MS-3057-10A
18
14.27
23.37
30.89
15.87
1-20
23.07
35.03
19.50
1 3/16-18
23.81
1 7/16-18
MS-3057-12A
20,22
15.87
MS-3057-16A
24,28
19.05
25.78
42.75
MS-3057-20A
32
23.80
28.00
51.00
31.70
1 3/4-18
MS-3057-24A
36
31.75
29.36
57.02
34.92
2-18
29
AMPHENOL
MS And 97B Series
Neoprene Sleeve
MS-3420
Rubber bushing. Protects wire bundles and unjacketed cables from possible damage by cable clamp.
D
F
B
A
C
E
45 0
All dimensions are in mm
E Rad
in inches
Part number
A
MS-3420-3
3.30
5.33
9.50
73.02
0.79
F Rad
in inches
0.79
MS-3420-4
5.59
7.67
12.70
69.85
0.79
0.79
1.59
B
C
D
MS-3420-6
7.92
10.84
15.59
66.67
0.79
MS-3420-8
11.10
14.02
18.77
63.50
1.59
1.59
MS-3420-10
14.27
15.62
21.94
60.32
1.59
1.59
MS-3420-12
15.87
18.80
26.23
56.20
1.59
1.59
MS-3420-16
19.05
23.54
26.39
53.97
1.59
1.59
MS-3420-20
23.80
31.50
40.41
50.80
1.59
1.59
MS-3420-24
31.75
34.67
46.79
47.62
1.59
1.59
Other Accessories
Plain flat gasket
For MS and 97B flange mounted receptacles
B
A
O
C
C
A
OD
4 HOLES
T
All dimensions are in mm
Part number
Shell size
A max
B
C
D
MS-101000
MS-108686
MS-101001
MS-101002
MS-101003
MS-101004
MS-101005
MS-108687
MS-101006
MS-108688
MS-101007
MS-110831
10SL
12S & 12
14S & 14
16S & 16
18
20
22
24
28
32
36
40
18.26
20.62
23.01
24.61
27.00
29.36
31.75
34.90
39.70
44.45
49.22
55.77
15.90
19.05
22.20
25.40
28.57
31.75
34.90
38.10
44.45
50.80
55.57
61.92
25.40
27.80
30.15
32.50
34.90
38.10
41.20
44.45
50.80
57.15
63.50
69.85
4.35
4.35
4.35
4.35
5.15
5.15
5.15
5.15
5.15
5.55
5.55
5.55
AMPHENOL
30
T
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
MS And 97B Series
Protective Cap For MS Series
MS-25043
For receptacles Has internal threads and is used on all receptacles. Gasket is provided in the dust cap forming a watertight seal.
D
C MAX
A
B MAX
E
All dimensions are in mm
MS Part number
Shell size
A Thread in inches
B
C
D
E
MS 25043-10D
MS 25043-12D
MS 25043-14D
MS 25043-16D
MS 25043-18D
MS 25043-20D
MS 25043-22D
MS 25043-24D
MS 25043-28D
MS 25043-32D
MS 25043-36D
MS 25043-40D
MS 10S-1-SL
MS 12-12S
MS 14-14S
MS 16-16S
MS 18
MS 20
MS 22
MS 24
MS 28
MS 32
MS 36
MS 40
5/8-24
3/4- 20
7/8-20
1-20
1 1/8-18
1 1/4-18
1 3/8-18
1 1/2-18
1 3/4-18
2-18
2 1/4-18
2 1/2-16
11.11
11.11
11.11
11.11
11.11
11.11
11.11
11.11
12.7
12.7
12.7
12.7
20.7
25.4
28.6
30.2
34.1
37.3
40.4
43.6
50
56.3
62.7
69
3.6
3.6
3.6
3.6
3.6
4.4
4.4
4.4
4.4
4.8
4.8
4.8
102
115
115
115
115
127
127
140
197
197
197
197
Notes :
1.
2.
3.
4.
For protective caps with nylon cord, contact factory.
Standard - Plating is Cad. For alternative finishes, contact factory.
Standard - straight knurling. For diamond knurling on caps, contact factory.
Please add 07 suffix for bigger end link.
Other Accessories
Protective cap for MS series
MS-25042
For plugs
Has external threads and is used on all plugs where a coupling ring is provided.
A
D
C MAX
B MAX
E
All dimensions are in mm
MS Part number
Shell size
A Thread in inches
B
C
D
E
MS 25042-10D
MS 25042-12D
MS 25042-14D
MS 25042-16D
MS 25042-18D
MS 25042-20D
MS 25042-22D
MS 25042-24D
MS 25042-28D
MS 25042-32D
MS 25042-36D
MS 25042-40D
MS 10S-1-SL
MS 12-12S
MS 14-14S
MS 16-16S
MS 18
MS 20
MS 22
MS 24
MS 28
MS 32
MS 36
MS 40
5/8-24
3/4- 20
7/8-20
1-20
1 1/8-18
1 1/4-18
1 3/8-18
1 1/2-18
1 3/4-18
2-18
2 1/4-18
2 1/2-16
16.67
21.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
17.4
20.6
23.7
26.9
30
33
36.4
39.6
46
52
58.7
65
4
4
4
4
4
4.8
4.8
4.8
4.8
5.6
5.6
5.6
102
115
115
115
115
127
127
140
197
197
197
197
31
AMPHENOL
MS And 97B Series
Other Accessories
Protective cap for 97B series
'B'
97B-25042
For Plugs
INK MARK A CONN. NO. &
BATCH CODE AS PER BOM.
All dimensions are in mm
'A'
'B'
SHELL
MAX.
MAX.
SIZE
10 SL
21.0
14 S
27.50
16 S
16
33.50
20
37.0
22
40.0
24
43.0
28
49.50
32
56.0
36
62.50
40
73.0
'E'
MIN.
90.0
23.50
4.30
30.0
18
'D'
+ 0.60/-0
'E' + ONE LINK
'A'
'D'
100.0
115.0
4.70
130.0
5.50
190.0
31.50
'B'
Protective Cap For 97B Series
97B-25043
'D'
INK MARK A CONN. NO. &
BATCH CODE AS PER BOM.
All dimensions are in mm
SHELL
SIZE
'A'
MAX.
10 SL
23.0
14 S
30.0
16 S
16
'B'
+ 0.20
'D'
+ 0.60/-0
16.0
'E'
MIN.
90.0
32.50
18
37.0
20
40.50
22
43.50
24
47.0
28
54.0
32
60.50
36
67.0
40
73.0
4.30
100.0
115.0
20.70
5.50
160.0
Note :- Please add 07 suffix for bigger end link. Applicable for Jam Nut
AMPHENOL
32
'E' + ONE LINK
'A'
For Receptacle
MS And 97B Series
Other Accessories
Dummy receptacle
MS-3105
A
B
OC
E
OG
D
F MAX
All dimensions are in mm
Part number
(see note)
A
B
C
3.05
D
Thread
in inches
5/8-24
MS-3105-10S
25.4
18.26
MS-3105-12S
27.79
E
F
G
14.27
3.96
8.20
20.62
3.05
3/4-20
14.27
3.96
11.43
max.
MS-3105-12
27.79
20.62
3.05
3/4-20
19.05
3.96
11.43
MS-3105-14S
30.17
23.01
3.05
7/8-20
14.27
3.96
13.36
MS-3105-14
30.17
23.01
3.05
7/8-20
19.05
3.96
13.36
MS-3105-16S
32.54
24.61
3.05
1-20
14.27
3.96
16.41
MS-3105-16
32.54
24.61
3.05
1-20
19.05
3.96
16.41
MS-3105-18
34.92
26.97
3.05
1 1/8-18
19.05
5.16
18.03
MS-3105-20
38.10
29.36
3.05
1 1/4-18
19.05
5.16
23.54
MS-3105-22
41.27
31.75
3.05
1 3/8-18
19.05
5.16
25.93
MS-3105-24
44.45
34.92
3.73
1 1/2-18
20.62
5.16
29.21
MS-3105-28
50.8
39.67
3.73
1 3/4-18
20.62
5.16
34.67
MS-3105-36
63.5
49.22
4.39
2 1/4-16
22.2
9.11
46.56
Note:
The dash number also indicates shell size.
Special Accessories
For special accessories, please contact factory with specifications and drawings.
Amphenol has in-house capability to meet and custom build your special
accessories requirements for its range of MIL-C5015 MS and 97B series connectors.
33
AMPHENOL
MS And 97B Series
MS/97B Connector- Accessories
Crimp contact
Contacts for MS/97B connectors are machined from copper alloys and silver plated for maximum corrosion
resistance, with a minimum millivolt drop and a maximum current carrying capacity; the size 16 and 12 socket
contacts are of the closed entry design. Gold plated contacts are also available.
Part Number
For Crimp Contacts
only*
MS-106433
Pin/
Socket
Pin
MS-108456
Socket
MS-108295
Pin
MS-108457
Socket
MS-108388
Pin
MS-110262
Socket
MS-108386
Pin
MS-108387
Socket
MS-108384
Pin
MS-111878
Socket
MS-112067
Pin
MS-112068
Socket
Mating End
Size
Wire Barrel
Size
16 Short†
16
16 Long
16
12
12
Allowable
Wire size
Test Current***
Amps
Insertion/Removal
Tool
16
18
60
22**
16
18
20
22**
13
10
7.5
5
13
10
7.5
5
12
14
23
17
97B-IR-12
97B-IR-16
97B-IR-16
8
8
8
10**
46
33
97B-IR-8
4
4
4
6**
80
60
97B-IR-4
0
0
0
1
2**
150
125
97B-IR-0
* Solder contacts are not sold as separate items. Part numbers shown here are for crimp contacts only.
** When using wire adapter sleeve shown.
*** Contact rating as stated are test ratings only. The connecter may not withstand full rated current through all
contacts continuously. Please note that the electrical data given is not an establishment of electrical safety factors.
This is left entirely in the designer`s hands as he can best determine which peak voltage, switching surges,
transients, etc. can be expected in a particular circuit.
MS/97B Connectors
Application tools
When proprietary crimp contacts are employed rather than the standard MS
approved solder contacts, the following application tools are recommended for use.
There is a possibility of additional crimping tools other than those included being
available at present or in the future for this specific application.
TOOLING CHART
Crimping
Tool
Positioner/
Turret
M22520/1-01
*
M22520/1-01
*
**
**
**
**
**
**
* Use Daniels Turret TH29-1 or Astro Tool Co. Turret 616266
** For appropriate crimp tool and positioner refer to Pico Crimping Tool Co.
† Tools used with Arbor Press 11-7364
AMPHENOL
34
MS And 97B Series
MS/97B Series Connectors
To obtain the specific connector required, write down the connector number from the typical example below. Only inserts
shown in the availability chart shown on page 7 can be specified. Connectors are delivered with protective plastic dust
covers. Include premating contact designation only if premating contact is required. The second letter in the premating
contact designation stands for the actual contact position. B at the end of the connector number indicates telescopic
bushing provided.
MS - 3
A - 18 - 19 - P - W - PC
100
PC- Premating
contact designation
Series designation
See pages 8 to 18
MS - Threaded version
97B - Bayonet version
3
4
Alternate positions
W-X-Y-Z
(No suffix - Normal)
- Solder
- Crimp
See insert orientations on page 6.
Shell style
100 - Wall mounting
receptacle
101
-
Cable connecting
receptacle
102
-
Box mounting
receptacle
103
-
Back box mounting receptacle
without rear end thread
103X
-
Back box mounting receptacle
with rear end thread to accept
accessory (Replace X by
required connector class)
105A
-
Plug without accessories,
suitable only of straight
accessories
106
107R
107T
-
Straight plug
-
Jam nut Receptacle
Jam nut Receptacle with
threads to accept accessories
107A
-
Plug suitable for right angle
back shell to interlock
108
- 90- plug
Contact type
P - Pin contacts
S - Socket contacts
Standard - Silver plating
Note : Contact factory for gold
plating part number.
Insert arrangement
See pages 7 to 18
Shell size
10S, 10SL, 12S, 12, 14S,
14, 16S, 16, 18, 20, 22,
24, 28, 32, 36.
0
Connector class
- Solid backshell. Applicable to straight plug
- Environment resisting with grommet
seal and strain relief backshell. 3106F
style includes a front gasket seal
- Environment resisting with grommet
R
seal, lightweight, shorter overall length
PG - Straight PG threaded backshells
Supplied with different diameter sizes to
suit varying Cable sizes, used for
unshielded cable
- Backshell for heat shrinkable end shell
G
SQ - Backshell for shielding & heat Shrinkable
end shells
EGM - Backshell with metal ferrule for shielded cable
PHM - Backshell without metal ferrule for unshielded
cable
A
F
Shell finish
Standard - Cadmium
plating with olive drab
chromate finish
Alternate finishes
1. Cadmium free zinccobalt plating with
olive drab chromate
finish-622
2. Cadmium free zinccobalt plating with
black finish (624)
3. Electroless Nickel
plating(A23)
4. 608:- Black Anodized
For details contact factory.
For 97B - Connector Modification
F 42 - Less grommet & backshell
F0/LC - Less contacts
563 - Gold plated contacts
T 00 - Metric threads in flange holes
97 BS - Bayonet Version with Steel wear pin (for receptacle connector)
RFI - Plug connector with grounding finger
HD - Heavy duty coupling ring
Note:- Connector 3103 supplied in two types. Connector with rear end thread to accept backshell & without rear end thread. To order
3103 without rear end thread do not add any connector class such as( A,E,F,R...) & hence it is similar to 3102 with Back Box mount
For e.g 97B-3103-18-1P-622
Connector without thread
35
AMPHENOL
MS And 97B Series
Notes :
Notice : All information, including illustrations given herein is believed to be accurate at the time of printing. In lieu of design advances,
Amphenol reserves the right to change specifications without notice. This publication ACR11 0601 01/10 MS AND 97B Series
Connectors supercedes all existing Amphenol literature on MS AND 97 B Series Connectors.
AMPHENOL
36
Bangalore Operations
Pune Operations
MARKETING HEAD
QUARTERS
Southern Region
Northern and Eastern Region
105, Bhosari Industrial Area,
Pune - 411 026.
Tel.: 91- 020 - 30688303, 30688304
Fax : 91 - 020 - 30688321
Email : vbhavsar@amphenol-in.com
sales@amphenol-in.com
4931, 11th Floor, High Point IV
45, Palace Road, Bangalore 560 001.
Tel.: 91-80-22281392, 22281002
Fax : 91-80-22253859
Email : kmanoj@amphenol-in.com
1414, 14th Floor, Chiranjiv Tower,
43, Nehru Place, New Delhi - 110 019.
Tel. : 91-11-26449177
Telefax : 91-11-26449176
Email : sunily@amphenol-in.com
Export
Western Region
Central Region
105, Bhosari Industrial Area,
Pune - 411 026, India.
Tel.: 91- 20 - 30688305, 30688353
Fax : 91- 20 - 27129158
Email : svpatil@amphenol-in.com
105, Bhosari Industrial Area,
Pune - 411 026.
Tel.: 91- 20 - 27119735, 30688334
Fax: 91- 20 - 27120581, 27119735
Email : sunilp@amphenol-in.com
107, 1st Floor, ‘Am Sri Classic’,
Sarojinidevi Road, Secunderabad-500 003.
Telefax : 91- 40-66332906
Email : pprasad@amphenol-in.com
www.amphenol-in.com
www.czarcontent.com
Our offices in India: