SPECIFICATION Part No. : PCB.SMAFST.2H.B.HT Product Name : SMA (F) Jack 2 Hole Panel Mount with Solder Post Termination Feature : SMA(F) Jack 2 Hole Panel Mount with Solder Post Termination Frequency Range: 0~12.4GHz Finish: Nickel Post Length: 2mm Total Length: 11.52mm RoHS Compliant SPE-12-8-141/A/WY Page 1 of 3 1. Introduction The PCB.SMAFST.2H.A.HT connector was designed to be mounted on a PCB, it has a Solder Post for connection and 2 Mounting holes. The connector pin is directly soldered onto pads on the PCB. The connector is a standard SMA (F) Jack. The SMA connector is the most popular type connector for RF applications. Taoglas connectors are all RoHS compliant. 2. Specification ELECTRICAL Impedance 50Ω Frequency Range 0~12.4 GHz Working Voltage Max. 335 Vrms Dielectric withstanding Voltage ≤1000 Vrms Insulation Resistance ≥5000M Ω MECHANICAL Connector Dimension 11.52 X 15.88 mm Connector Pin Diameter 1.27 mm Connector Pin Height 2 mm Connector Type SMA (F) ENVIRONMENTAL RoHS compliant SPE-12-8-141/A/WY Page 2 of 3 3. Connector Drawing Name Material Finish QTY 1 Body Brass Nickel 1 2 Female Contact Phosphor Bronze Gold 1 3 Insulator Teflon White 1 Taoglas makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Taoglas reserves all rights to this document and the information contained herein. Reproduction, use or disclosure to third parties without express permission is strictly prohibited. Copyright © 2012, Taoglas Ltd. SPE-12-8-141/A/WY Page 3 of 3