iCG Series 6A Non-isolated SMT Point Of Load Features u DOSA Compatible Footprint u Surface Mountable u Constant Switching Frequency u Edge Plated Castellations (EPC) - Inspectable Solder Joints u No external loop tuning components needed u Excellent Transient Response Key Market Segments & Applications Specifications Model DC Output Voltage DC Input Voltage Efficiency Output Voltage Tolerance Switching Frequency Line Regulation Load Regulation External Load Capacitance Output Ripple and Noise Overcurrent Protection Remote On / Off Remote Sense Power Good Operating Temp Storage Temperature Safety Agency Approvals Weight Size (LxWxH) Warranty V V % % kHz mV mV uF mVpp A °C °C g / oz mm / in. yrs iCG05 iCG12 0.6 - 3.63 2.4 - 5.5 84 - 93 0.7 - 5.5 4.5 - 14 84 - 94 ±3 600 3 6 3 6 47 - 1000 15 Hiccup Type Negative Logic (For Positive Logic Contact Factory) (+) Sense, compensating up to 0.5V Not available Yes, Low on fail -40 to 115 (see thermal data on website) -55 to 125 UL60950-1, CSA 22.2 No.60950-1-03; VDE CB scheme (IEC60950-1, EN60950-1) 3g / 0.106 oz 12.2 x 12.2 x 8.5 / 0.48 x 0.48 x 0.335 3 years 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 15 140 Disclaimer: us.tdk-lambda.com/lp/legal.htm iCG Series Model Selector Model iCG05006A006V-003-R iCG12006A007V-003-R Input Voltage (V) 2.4 - 5.5 4.5 -14 Output Current (A) 6 6 Output Positive Logic Negative Logic EPC Solder Voltage (V) On/Off On/Off Sequencing Bumping 0.6 - 3.63 yes yes* 0.7 - 5.5 yes yes* *For LGA solder bumping specify -007-R model suffix Outline Drawing Pinout PIN 1 Function ON / OFF PIN 6 Function TRIM 2 3 VIN GND 7 8 GND no connection 4 5 VOUT SENSE 9 10 reserved PWR GOOD Other Industrial Products CC-E 1.5 - 30W 5, 12, 24 or 48V input isolated DC-DC converters PX 10 - 60W 12, 24 or 48V input isolated DC-DC converters iAF, iBF, iCF 3 - 20A DOSA2 non isolated DC-DC converters For Additional Information, please visit us.tdk-lambda.com/lp/products/icg-series.htm 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 141 Revision A2: Oct 2012