Tel : Fax : email : 0044 (0)118 979 1238 0044 (0)118 979 1283 [email protected] ACT250SMX-4 The ACT250SMX-4 is an ultra miniature surface mount Crystal whose low power consumption makes it ideal for portable applications. It’s size makes it suitable for high density circuit boards or applications where space is limited and the tape and reel packaging means that it is ideal for automatic placement machines.The heart of the device is a heat resistant cylinder type crystal which gives it high stability characteristics sufficient to allow reflow soldering. Specification Parameter Frequency Range Frequency Tolerance Symbol fo f/fo Specification 30.00 ~ 100KHz ±20ppm ~ 100ppm Condition 100~200kHz See table/note 1 Please specify Please specify ±200ppm~300ppm Frequency v Temp Characteristics f/Fo See drawing Turnover Temperature Freq. Temp. coefficient Temp Operating Range Temp Storage Range Equivalent Series Resistance Shunt Capacitance Load Capacitance Motional Capacitance Drive Level Insulation Resistance Soldering reflow Aging (first year) Tm Topr Tstg ESR C0 CL C1 DL IR 25°C ±5°C -0.04ppm / °C² max -10 ~ +60°C std ( -40 ~ +85°C available) -20 ~ +70°C std 65k max** 2.0pF max 10 ~ 25.0pF 4.0 fF max 1.0 W max 500M Min see diagram: page 2 ±5ppm / first year Fa -10 ~ +60°C Please specify Others available, please enquire. @ 25°C Please specify. 25°C ±3°C ** For the ESR specification on specific frequencies please enquire. Table 1 Developed frequencies (kHz) 32.000 32.768 40.000 60.000 77.500 76.800 Note1. Availability of other frequencies dependant on MOQ please enquire. Pad Surface Material Sn/Cu Please note that all parameters can not necessarily be specified in the same device Customer to specify : Frequency, Frequency tolerance, Operating Temperature, Load capacitance In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK http://www.actcrystals.com Issue : 10 C1b Date : 31-5-2012 Tel : Fax : email : 0044 (0)118 979 1238 0044 (0)118 979 1283 [email protected] ACT250SMX-4 TAPE AND REEL DIMENSIONS (mm) Standard Reel Size 2000 pieces 30.00 ~ 100KHz 100~200kHz See table 1 ±10ppm ~ 100ppm ±200ppm~300ppm Please note that all parameters can not necessarily be specified in the same device Customer to specify : Frequency, Frequency tolerance, Operating Temperature, Load capacitance In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK http://www.actcrystals.com Issue : 10 C1b Date : 31-5-2012 ACT250SMX- Device series code is AF Example : AF 00010 I Z E XO F E (26SMX) (100.000kHz ) (±30ppm) STD - See data (-10+60) (12.5pF) Fund' (1K Reel ) - PF (RoHS) 30.00 ~ 100KHz ±10ppm ~ 100ppm Tolerance (±pm) 25ºC Frequency @ G 20 H 25 I 30 L 50 N 100 O 200 R 300 Frequency dependant please refer to data To 999.9999kHz 1st five digits of Frequency ( See available frequency range on data sheet. ) Examples 00007 = 70.00kHz 00003 = 32.00kHz 00010 = 100.00kHz Operating Temperature Range (ºC) Stability Over Operating Temperature (ºC) NB: It is important to suffix the above part number with the full frequency required to give a completed part number as illustrated below Full Example Part Number AF00010IKZXOFC-PF NOTES : 100.00kHz E -10+60 G -20+70 M -40+85 Std Load Capacitance ( pF or Series Resonance) XO KO MO OO ZO PO RO TO VO AA BA 12.5 10 11 12 14 15 16 18 20 24 25 Mode F RoHS Comp' Fundamental - PF Std Package L = Loose E =2K Reels Table 1 Developed frequencies (kHz) 32.000 32.768 40.000 60.000 77.500 76.800 Note1. Availability of other frequencies dependant on MOQ please enquire. 2) Other Tolerances, CL's and other Operating Temperature Ranges may be available. As each of these specification parameters impact on each other, it is not always possible to combine all options in one device. Therefore, if a specification not catered for above is required, please contact us directly for the relevant part 3) ACT are always happy to consider truly custom specification parts which may require non-standard specification parameters, specific testing, customer requested AQL requirements, non standard packaging or taping and reeling and custom marking. Such devices would normally be allocated a custom specification ACT250SMX device may have a part number such as AF00007C- C1121-PF) ISO9001 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, United Kingdom http:www.actcrystals.com Issue : 10 C1b Date : 31-5-2012