114-106094 Application Specification 2012/03/02 Rev.A NEXT GENERATION GRACE INERTIA CONNECTOR 3.3 CONTACT Application Specification 114-106094 GRACE INERTIA CONNECTOR 3.3 CONTACT 1. Applicable Product Part Number Wire Size Description Part No. 1983780-1 REC CONTACT mm2(AWG) 0.21～0.53 (AWG#24～#20) Insulation Diameter (mm) φ1.5～2.5 Strip Contact for Application Crimp TE Connectivity (Shanghai) Co., Ltd.（No.1528 Gumei Rd, Building 5,Shanghai 200233） 1 of 6 © Copyright 2005 by Tyco Electronics Shanghai Co., Ltd. * : Trademark All rights reserved. Application Specification 2. 114-106094 Nomenclature and Crimping Features: Insulation Barrel Width Wire Wire Barrel Insulation Barrel Frictional Contact Area Barrel Flush⑥ Wire stripping Length ⑧ Rear Bellmouth ③ Front Bellmonth ② Wire-End Protrusion Length ⑦ Wire Barrel Crimp Height Cut-Off Tab Length ① Contact Length ⑨ Fig.1 Rev. A 2 of 6 Application Specification 3. 114-106094 Crimping Conditions and Crimp Data: 3.1 Crimping Conditions: No. 1 Item Allowable Deviation after Crimping 2 Cut-Off-Tab Length 3 Bellmouth 4 Spec Refer Bend-up 3°Max. Fig.2 ① Bend-down 3°Max. Fig.3 ② Twisting 3°Max. Fig.4 ③ Rolling 5°Max. Fig.5 ④ 0.25mm (MAX) Fig.1 ① 0.1～0.3mm Fig.1 ③ 0.2mm Max. Fig.1 ⑥ 0.1～0.65mm Fig.1 ⑦ 2±0.3mm Fig.1 ⑧ 8.3±0.2mm Fig.1 ⑧ Rear Anvil Flush 5 Wire-End Protrusion Length 6 Insulation stripping Length 7 Contact length Rev. A One-Wire Crimp 3 of 6 Application Specification ① Bend-up 114-106094 ② Bend-down 3°Max ③ Twisting 3°Max ③ Twisting 3°Max ④ Rolling 3°Max ④Rolling 5°Max ° 5°Max ° Rev. A 4 of 6 Rev. A 0.51～0.53 (#20) 1 2.7ｍｍ Min ②Applicable wire insulation dia φ2.0～φ2.5 ： 2.6“F” Width (mm) 2.4ｍｍ Min. A B C Disk Symbol （＊2） Height (mm) Insulation Barrel Crimp ①Applicable wire insulation dia φ1.5～φ2.0 ： (＊2) Insulation barrel crimp height must apply following 0.93 0.80 1.27 “F” 0.31～0.38 (#22) 1 2 0.74 0.21~0.23 (#24) 1 Height ±0.03 (mm) mm2(AWG) Width (mm) Wire Barrel Crimp No. ± 0.5(mm) Stripping Length Insulation (＊１) 1762389-2 are not available on TE now . 2088571-2; 1552510-2 （＊１）; 1762389-2 Applicator Number. Wire Size Application Crimp 3-2. Crimping Data 1.5～2.5 Finished insulation Diameter (mm) 6 5 3 (kg)min. Strength Crimp Tensile Application Specification 114-106094 5 of 6 Rev. A 1762390-1 mm2(AWG) 0.21~0.23 (#24) 0.31～0.38 (#22) 0.51～0.53 (#20) No. 1 1 1 Wire Size Hand Tool Crimp Hand Tool Number. 3-2-2 2 ±0.5(mm) Insulation Stripping Length 1.27 “F” Width (mm) 0.90 0.75 Height ±0.05 (mm) A B Disk Symbol Wire Barrel Crimp 2.6“F” Insulatio n Barrel Crimp Width (mm) 1.5～2.5 Finished insulation Diameter (mm) 6 5 3 Crimp Tensile Strength (kg)min. Application Specification 114-106094 6 of 6