FTR-C1 Series ULTRA MINIATURE RELAY SIGNAL RELAY FTR-C1 Series RoHS compliant n Features Dimensions of large contact gap relay Height: 9.3 mm maximum (THT) 9.65 mm maximum (SMT) Length:15 mm maximum Width: 7.5 mm maximum lConforms to IEC60950 / EN60950 / UL1950/ C22.2 No.950 spacing & high breakdown voltage Clearance: 2.0 mm ( coil and contacts) Creepage: 2.5 mm ( coil and contacts) l HIGH RELIABILITY Bifurcated contacts lLow power consumption 280 mW (latching type 140mW) lRoHS Compliant since beginning of production l n ORDERING INFORMATION [Example] FTR-C1 C A 012 G-(B05)* (a) ( b)(c) (d) (e) (f) (a) Series Name FTR-C1 (b) Terminal Appearance C: Through hole type G: Surface mount type (c) Operation Function A: Standard Type B: Single coil latching type (d) Coil Number Nominal Voltage (e) Contact Material G: Silver alloy Remarks: Actual marking on relay would not carry code FTR and be as below: Ordering code Actual marking FTR-C1CA03G → C1CA03G * If ordering tape and reel package, please add “B05” after the partnumber (tape and reel is only available for SMT type, example: FTR-C1GA003G-B05 FTR-C1 Series n COIL DATA CHART Standard type Model THT SM T Nominal Voltage Coil Resistance (±10%) Must Operate Voltage Must Release Voltage Nominal Operating Power (±10%) FTR-C1CA003G FTR-C1GA003G 3 VDC 32.1 Ω 2.25 VDC 0.3 VDC 280 mW FTR-C1CA4.5G FTR-C1GA4.5G 4.5 VDC 72.3 Ω 3.38 VDC 0.45 VDC 280 mW FTR-C1CA005G FTR-C1GA005G 5 VD C 89.3 Ω 3.75 VDC 0.5 VDC 280 mW FTR-C1CA012G FTR-C1GA012G 12VDC 514 Ω 9.00 VDC 1.2 VDC 280 mW FTR-C1CA024G FTR-C1GA024G 24VDC 1920 Ω 18.0 VDC 2.4 VDC 300 mW Nominal Voltage Coil Resistance (±10%) Set Voltage Reset Voltage Nominal Operating Power (±10%) Note: All values in the table are measured at 20˚C. Single coil latching type Model THT SM T FTR-C1CB003G FTR-C1GB003G 3 VDC 64 Ω 2.25 VDC 2.25 VDC 140 mW FTR-C1CB4.5G FTR-C1GB4.5G 4.5 VDC 14 5 Ω 3.38 VDC 3.38 VDC 140 mW FTR-C1CB005G FTR-C1GB005G 5 VD C 179 Ω 3.75 VDC 3.75 VDC 140 mW FTR-C1CB012G FTR-C1GB012G 12VDC 1029 Ω 9.00 VDC 9.00 VDC 140 mW FTR-C1CB024G FTR-C1GB024G 24VDC 3200 Ω 18.0 VDC 18.0 VDC 180 mW Note: - All values in the table are measured at 20˚C. - Single coil latching type is applying to the standard now. FTR-C1 Series n SPECIFICATIONS FTR-C1CA ( )G FTR-C1GA ( )G Item Contact Coil Time Value Arrangement 2 F o rm C Material Silver alloy Resistance (initial) Max. 100m ohm (at 1A 6VDC) Max. Switching Power 37.5AV / 30W Max. Switching Voltage 250VAC, 220 VDC Max. Switching Current 1A Operating Temperature -40˚ C to + 85˚ C (no frost ) Max. Allowable Voltage 150% nominal voltage (at 20˚ C) Operate Time Max. 10ms (at nominal voltage, without bounce) Release Time (without diode) Max. 10ms (at nominal voltage, without bounce) Resistance (at 500 VDC) Min. 1,000M ohm S Dieelectric Strenght Insulation Surge Strength Between open contacts 1,500VAC, 1 minut e Between adjacent contacts 1,500VAC, 1 minut e Between coil and contacts 3,000VAC, 1 minut e Between open contacts 2,500V (at 2/10 microsec ) Between adjacent contacts 2,500V (at 2/10 microsec ) Between coil and contacts 5,000V (at 2/10 microsec ) Mechanical 10x106 operations min. (at 10Hz) Electrical (resistive load) 100x103 operations min. at 1A, 30VDC, 0.5Hz 100x103 operations min. at 0.1A, 48VDC, 0.5Hz 100x103 operations min. at 0.3A, 125VDC, 0.5Hz Vibration Resistance Misoperation 10 to 55 Hz at double amplitude of 3.3 mm Endurance 10 to 55 Hz at double amplitude of 5 mm Shock Resistance Misoperation Min. 500 m/s2 Endurance Min. 1,000 m/ s2 UL / CSA Contact Ratin g 0.3A 125 VAC 1A 30VDC 0.3 110VDC Insulation Class Supplementary Insulatio n Working Voltage 250 V Pollution Degree 2 Clearance 2.0 mm (between coil and contacts) Creepage Distance 2.5 mm (between coil and contacts) Life IEC060950 UL1950 C22.2 No.950 EN60950 FTR-C1 Series n DIMENSIONS AND SCHEMATICS Through hole type Polarity Bar Japan 7.4 ±0. F.T. CCA003G 003K 9.1 ± 0.2 4.9 ±0. 3.5 Unit: mm n 5.08 ±0.3 (1.16) 2.54±0.3 2.54±0.3 n TERMINAL DESIGNATIONS RECOMMENDED MOUNTING PAD +0.1 8-O 0.8 -0.05 Standard type (Bottom view de-energized position) 3 4 5 10 9 8 5.08 ±0.1 (+) 1 5.08 ±0.3 (1.16) (1.1) (-) 12 Polarity Bar (1.1) Single Coil Latching type (Bottom view reset position) (+) (-) 1 3 4 2.54±0.1 5 S shows the polarity of set positin R shows the polarity of reset position S R (+)..(+) 12 Polarity Bar 5.08 ±0.1 2.54±0.1 10 9 8 Unit: mm FTR-C1 Series n DIMENSIONS AND SCHEMATICS Surface mount type Polarity Bar Japan 7.4 ± 0.1 F.T. C1GA003G 0031K 9.4 ± 0.25 14.9 ± 0.1 0.3-0. (1.1) 2.54±0.3 5.08 ±0.3 2.54±0.3 3o±2o 5.08 ±0.3 Unit: mm 9.4+0.3 TERMINAL DESIGNATIONS (+) 1 Polarity Bar 10 3 9 8 4 5 Single Coil Latching type (Bottom view reset position) (-) (+) 12 10 9 8 1±0.1 1±0.1 1±0.1 5.08 ±0.1 2.54±0.1 2.54±0.1 S shows the polarity of set positin R shows the polarity of reset position S R (+) (-) 1 Polarity Bar RECOMMENDED MOUNTING PAD 7.24±0.1 (-) 12 3.16 ±0.1 Standard type (Top view de-energized position) n 3.16 ±0.1 n 3 4 5 Unit: mm FTR-C1 Series n RECOMMENDED SOLDERING CONDITIONS (TEMPERATURE PROFILE) Temperature (C) IRS (Infrared Reflow Soldering) soldering T3 T 3 = 245C max. T 2 = 200C max. cooling T 1 = 165C max. T2 T1 0 preheating 120 sec maximum Note: 1.Temperature profiles show the tempera- ture of PC board surface. 2. Please perform soldering test with your actual PC board before mass produc- tion, since the temperatures of PC board surfaces vary according to the size of PC board, status of parts mounting and heating method. 30 sec Max. n PACKAGING Packaging method (only tape packaging is available) 1. Taping standards: JIS C 0806 and RC-10092B (EIAJ) Orientation 2. Reel type: TB2416 or TB2416 Mark side 3. Reel type: RD24D 4. Quantity of 1 reel: 500 pieces 4 ±0.1 21.05 17.1 O 2.2 10.7 12.5 16±0.1 24±0.3 +0.1 O1.5-0 0.4 11.5±0.1 1.75±0.1 Tape Dimensions: Feeding 2±0.1 Reel Dimensions: 2±0.5 O 13±0.5 O 21±0.8 O 370 25.5+0.1 MAX. 2.0 Unit: mm FTR-C1 Series RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu amd Sm-3.0 Cu-Ni (only FTR-B3 and FTR-B4 from February 2005. Reflow Solder condtion for SMT Peak Temp.: max. 250°C Soldering temperature (°C) 250 Flow Solder condtion: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: 220 Cooling Pre-heating 70 Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. 30 90~20 sec. max. 20 sec. 20~30 sec. (duration) We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity Moisture Sensitivity Level standard is not applicable to electromechanical realys. l 4. Tin Whisker SnAgCu and SnCuNi solder is known as low risk of tin whisker. No considerable length whisker was found by our in-house test. l FTR-C1 Series Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: http://www.fujitsu.com/emea/services/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://us.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property off their respective owners. Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Rev. April 13, 2007