VANLONG CO602_13

Clipped-Sine & HCMOS OCXO
Oven Controlled Crystal Oscillator
•
Low power consumption
•
Excellent temperature stabilities
•
High stability overtone crystal
•
Fast warm-up
CO602
Specifications:
CO-C
Frequency Range:
1.0 MHz or 160.0 MHz
Operating Temperature:
Storage Temperature:
0°C ~ +50°C
-A
-10°C ~ +45°C
-B
-10°C ~ +55°C
-C
-20°C ~ +60°C
-D
-30°C ~ +70°C
-E
-40°C ~ +85°C
Frequency Stability:
Accuracy:
Vs. Temperature:
Short-Term Stability:
Aging Rate:
± 5 x 10-9
± 5 x 10-7
± 1 x 10-7
± 5 x 10-8
± 1 x 10-8
± 5 x 10-9
± 1 x 10-10
± 1 x 10-9
± 5 x 10-8
- 57
- 17
- 58
- 18
- 59
per second
per day
per year max
Output Waveform:
Sine Wave, HCMOS
Output Level:
2dBm min. Sine Wave
TTL, HCMOS compatible
Phase Noise (10MHz):
-120dBc/Hz
-140dBc/Hz
-145dBc/Hz
-150dBc/Hz
Harmonics Distortion:
Supply Voltage:
Supply Current:
Frequency Adjust:
@ 10Hz
@ 100Hz
@ 1KHz
@ 10KHz
Pin
-25 dB
+3.3 VDC (± 5%)
+5.0 VDC (± 5%)
Vcc
2
Vref
3
Vc/Nc
4
Ground
5
Output
-P
300mA max at warm-up
100mA max after warm-up at 25°C
±3.0ppm (AT-cut), ±1.0ppm (SC-cut),
Note:
1.
Other frequencies, stabilities, and operating temperature ranges available.
Consult VTC Support for specific requirements.
2.
Not all combinations of the above, stabilities, and temperature ranges are
available. Consult VTC Support if your requirement is not standard.
3.
Configurations
1
All dimensions are in mm
Ordering Information
Product name + Temperature + Stability +
Frequency + Other Specification Code.
i.e. CO602C18-10.0MHz
or CO602D58P-10.0MHz
All specifications subject to change without notice.
Phone: +86 (10) 5820-3910
February 2009
Fax: +86 (10) 5820-3915
Email: [email protected]
Web: http://www.vanlong.com
Vanlong Technology Co., Ltd.