RADIAL-TAPING SPECIFICATIONS FOR R-1 RECTIFIERS h P A D F d H W2 W1 W0 W t D0 T P1 ITEM Body diameter P0 SYMBOL D A SPECIFICATIONS (mm) 2.5+0.2 SPECIFICATIONS (inch) 0.100+0.008 3.1+0.3 0.122+0.012 Lead wire diameter d 0.6+0.1 0.024+0.004 Component pitch P 12.7+1.0 0.500+0.040 Feed hole pitch P0 12.7+1.0 0.500+0.040 Component lead spacing Deflection F 5.0+0.8 0.0+2.0 Tape width W 18.0 0.196+0.032 0.000+0.080 +0.040 0.709 0.020 Hold-down tape width W0 12.5 min. Hole position W1 +0.7 9.0 0.5 Length from seating plane H Feed hole diameter Total tape thickness D0 Cut out length Lead protrution Center of seating plane location T P1 2.0 max. 6.35+0.7 Adhesive tape position Lead bend W2 B 3.0 max. 1.0 max. Body length h +1.0 0.5 0.492 min. 0.354 +0.028 0.020 20.0+0.5 0.787+0.020 4.0+0.3 0.157+0.012 t 0.7+0.2 L 11.0 max. 0.028+0.008 0.433 max. 0.079 max. 0.250+0.028 0.118 max. 0.040 max. NOTES: 1. Packaging per EIA/JEDEC standard RS-468 and specifications given above. Available only for R-1 product utilizing 0.6mm diameter leads. 2. Maximum cumulative pitch tolerance: 1.0mm/20pitches.