GBU10A thru GBU10G Single Phase Glass Passivated Silicon Bridge Rectifier VRRM = 50 V - 400 V IO = 10 A Features • Plastic package has Underwriters Laboratory Flammability Classification 94V-0 • High case dielectric strength of 1500 VRMS • Glass passivated chip junction GBU Package • Ideal for printed circuit boards • High surge overload rating • High temperature soldering guaranteed: 260⁰C/ 10 seconds, 0.375 (9.5mm) lead length • Not ESD Sensitive Mechanical Data Case: Molded plastic body over passivated junctions Terminals: Plated leads, solderable per MIL-STD-750 Method 2026. Mounting position: Any Maximum ratings at Tc = 25 °C, unless otherwise specified Parameter Symbol Conditions GBU10A GBU10B GBU10D GBU10G Unit Repetitive peak reverse voltage VRRM 50 100 200 400 V RMS reverse voltage VRMS 35 70 140 280 V DC blocking voltage Operating temperature Storage temperature VDC Tj Tstg 50 -55 to 150 -55 to 150 100 -55 to 150 -55 to 150 200 -55 to 150 -55 to 150 400 -55 to 150 -55 to 150 V °C °C Electrical characteristics at Tc = 25 °C, unless otherwise specified Single phase, half sine wave, 60 Hz, resistive or inductive load For capacitive load derate current by 20% Conditions GBU10A GBU10B GBU10D GBU10G Unit IO Tc = 100 °C 10.0 10.0 10.0 10.0 A IFSM tp = 8.3 ms, half sine 220 220 220 220 A Maximum instantaneous forward voltage drop per leg VF IF = 10 A 1.1 1.1 1.1 1.1 V Maximum DC reverse current at rated DC blocking voltage per leg IR Ta = 25 °C 5 5 5 5 Ta = 125 °C 500 500 500 500 Typical junction capacitance per leg 3 Cj 70 70 70 70 pF RΘJC 2.2 2.2 2.2 2.2 °C/W Parameter Maximum average forward rectified current 1,2 Peak forward surge current Typical thermal resistance per leg 1,2 1 Symbol - Device mounted on 100 mm x 100 mm x 1.6 mm Cu plate heatsink 2 - Recommended mounted position is to bolt down device on a heatsink with silicon thermal compond for maximum heat transfer using #6 screw. 3 - Measured at 1.0 MHz and applied reverse bias of 4.0 V www.genesicsemi.com/silicon-products/bridge-rectifiers/ 1 μA GBU10A thru GBU10G www.genesicsemi.com/silicon-products/bridge-rectifiers/ 2 GBU10A thru GBU10G Package dimensions and terminal configuration Product is marked with part number and terminal configuration. Di Dimensions i iin iinches h and d ((millimeters) illi t ) www.genesicsemi.com/silicon-products/bridge-rectifiers/ 3