2.0 A Single-Phase Silicon Bridge Rectifier Data Sheet Mechanical Dimensions Description 4.2 + 0.2 KBJ200~210 19.6 + 0.5 2.0 + 0.4 + ~ ~ _ 11.0 + 0.3 3.4 + 0.2 13.0 + 0.3 1.8 + 0.2 1.0 + 0.1 0.40 + 0.11 5.1 + 0.3 KBJ-2 Dimensions in millimeters(1mm =0.0394inch ) Features Mechanical Data This series is UL listed under the Recognized Component Index, file number E142814 Plastic package has Underwriters Laboratory Flammability Classification 94V-0 High case dielectric strength of 1500VRMS Ideal for printed circuit boards High surge current capability Case : Molded plastic body over passivated junctions Terminals : Plated leads solderable per MIL-STD-750, Method 2026 Polarity : Polarity symbols molded on body Mounting Position : Any(3) Mounting Torque : 5 in-lbs max. Weight : 0.15 ounce, 4.0 grams (approx) Maximum Ratings & Thermal Characteristics Rating at 25 C ambient temperature unless otherwise specified, Resistive or Inductive load, 60 Hz. For Capacitive load derate current by 20%. KBJ KBJ KBJ KBJ KBJ Parameter Symbol KBJ 200 201 202 204 206 208 VRRM 50 100 200 400 600 800 Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified output current KBJ 210 1000 Unit V VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V TA =25 C IF(AV) 2.0(1) A 50.0 A A sec Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) IFSM Rating for fusing ( t<8.3ms) I t 60 Maximum thermal resistance per leg RejA RejC 2.6(2) 5 (1) Operating junction and storage temperature range TJ, TSTG -55 to + 150 2 2 C/W Electrical Characteristics Rating at 25 C ambient temperature unless otherwise specified. Resistive or Inductive load, 60Hz. For Capacitive load derate by 20 %. KBJ KBJ KBJ KBJ KBJ KBJ Parameter Symbol 200 201 202 204 206 208 Maximum instantaneous forward voltage drop VF 1.1 per leg at 2.0A Maximum DC reverse current at rated DC blocking voltage per leg TA=25 C TA=125 C IR 10 250 Notes: (1)Unit case mounted on Al plate heatsink. (2)Units mounted on P.C.B. with 0.5x0.5"(12x12mm) copper pads and 0.375"(9.5) lead length. (3)Recommended mounting position is to bolt down on heat sink with silicone thermal compound for maximum heat transfer with #6 screw. KBJ Unit 210 V A 2.0 A Single-Phase Silicon Bridge Rectifier C Data Sheet o Fig. 2 Maximum Non-repetitive Peak Forward Surge Current Peak Forward Surge Current, Amperes Fig. 1 Derating Curve for Output Rectified Current 2.0 1.5 1.0 8.3ms Single half-sine-Wave [JEDEC Method] 50 40 30 20 10 0 10 1 100 Number of Cycles at 60HZ 0.5 0 Fig. 4 Typical Reverse Characteristics 10 50 100 150 o Case Temperature, C Instantaneous Reverse Current ,Amperes TA=125 C Fig. 3 Typical Instantaneous Forward Characteristics 10 TA=100 C 1.0 0.1 TA=25 C .01 Tj=25 C Pulse Width=300us 2% duty cycle 0 20 40 60 80 100 120 Percent of Rated Peak Reverse Voltage, % 1.0 Fig. 5 Typical Junction Capacitance 100 0.1 .01 0.4 0.6 0.8 1.0 1.2 Instantaneous Forward Voltage, Volts 1.4 Capacitance, pF Instantaneous Forward Current, Amperes Average Forward Output Current, Amperes 60Hz Resistive of Inductive Load 60 Tj=25 C f=1.0MHz 10 1 10 Reverse Voltage, Volts 100 140