SIRU3018 Datasheet - EMCORE Corporation

SIRU3018 .05–18 GHz
Unamplified Fiber Optic Receiver
DATASHEET | JULY 2014
MICROWAVE
The SIRU3018 (Small Integrated Receiver Unit) is an ideal receiver to use with
EMCORE’s high-performance externally-modulated fiber optic transmitters. This
high-performance optical receiver is designed for applications from 50 MHz to
18 GHz and features high optical input power of up to +12 dBm (15 mW). The
SIRU3018 is a fully-integrated unit that contains both high-frequency PIN photodiode and the control electronics. Only DC input voltages and the optical signal are
required for operation.
„„ Microwave Antenna Signal Distribution
The broad bandwidth of the SIRU3000 units makes it ideal to construct transparent links for microwave antenna signal distribution, Electronic Warfare (EW) systems and Ku- and Ka-Band systems. Other applications include delay lines, signal
processing, radar system calibration, phased array antennas and other systems
where it is necessary to transport RF and microwave signals over long distances
without signal degradation.
„„ Broadband Delay Line and Signal Processing
Performance Highlights
Applications
Systems
Parameter
Min
Max
Units
.05
-
18
GHz
Wavelength
-
1550
-
nm
„„ Phased Array Antenna Systems, Interferometric Optical Input Power
-
-
+12
dBm
Temperature Range
-40
-
70
°C
„„ Frequency Distribution Systems
Antenna Arrays
Features
Frequency Range
Typical
Absolute Maximum Ratings
„„ Integrated High Frequency Photodiode and Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These
are absolute stress ratings only. Functional operation of the device is not implied at these or any other
Bias Circuitry in a Connectorized Package
conditions in excess of those given in the operational sections of the data sheet. Exposure to absolute
„„ 50 MHz - 18 GHz Bandwidth
„„ 1310 nm and 1550 nm Operation
maximum ratings for extended periods can adversely affect device reliability.
Parameter
Symbol
Min
Max
Units
Operating Temperature (within specifications)
TOP
0
50
°C
„„ High Optical Input Power Capability:
Operating Temperature (with degraded performance)
TOP
-40
70
°C
Storage Temperature
TSTG
-40
70
°C
-
NA
+13
dBm
+12 dBm (15 mW)
Receiver Optical Input Power (damage level threshold)
Optical Specifications
Parameter
Condition
Min
Typical
Max
Unit
Wavelength
-
1280
-
1580
nm
Optical Power Input
-
-
-
+12 (15mW)
dBm
Responsivity (@1310 nm)
-
0.7
-
-
A/W
Responsivity (@ 1550 nm)
-
0.7
-
-
A/W
FC/APC
-
-
-
-
Connectors
© 2014 EMCORE Corporation | REV 2014.07
+1 626-293-3400
[email protected]
www.emcore.com
Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.
SIRU3018 .05–18 GHz
Unamplified Fiber Optic Receiver
DATASHEET | JULY 2014
MICROWAVE
RF Specifications
Parameter
Condition
Min
Typ
Frequency Range
-
0.05
Electrical Power Requirements
-
-
RF Response/Gain Variation (S21 w/EMCORE SITU3122 TX)
0.05 - 1 GHz
1 - 18 GHz
Photodiode Monitor Output
RF Connector
Max
Unit
-
18
GHz
-
+15 V @ 50
mA
-
<5
<10
dB
dB
V/mA
-
-
0.1
-
2.92 mm
-
SMA (female)
-
-
-
-
50
0
Ω
RF Output Impedence
Note: Units provide signal transport above and below rated RF bandwidth with some degradation in signal gain and return loss.
Package Outline Drawing
Physical Specifications
Parameter
Configuration
Dimensions
D-Connector Pin Out
DC Power Consumption
Condition
Min
Typ
Max
Unit
Pin
Function
Input Voltage
Max Current
Self Contained Housing
-
-
-
-
1
+15 V
+15
0.7 A
0.8 H x 4.6 W x 3.4 D
-
-
-
in
2
n/c
mm
3
n/c
-40
-
+70
°C
4
GND
-
oz
5
n/c
g
6
Photodiode Monitor
7
n/c
8
n/c
9
n/c
20.32 H x 116.84 W x 86.36 D
Operating/Storage Temperature
Weight
-
-
10
-
-
283.5
Ordering Information
Product Name
SIRU3018-00
Description
0.05 - 18 GHz Fiber Optic Receiver Module
© 2014 EMCORE Corporation | REV 2014.07
+1 626-293-3400
[email protected]
www.emcore.com
Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.