DSCC 05003 www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors High Frequency DSCC Qualified Type 05003 FEATURES • US Defense Supply Center approved • Federal stock control number, CAGE CODE 2770A Available Available • Case size 0402 • High frequency • Excellent aging characteristics • Tin / lead termination code “Z” • Lead (Pb)-free terminations code “M” • Surface mount, wet build process • Reliable Noble Metal Electrode (NME) system • Made with a combination of design, materials and tight process control to achieve very high field reliability • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details. APPLICATIONS • Broadband wireless communication • Satellite communication • WiFi (802.11) and WiMax (802.16) • VolP networks and cellular base stations • Subscriber based wireless devices ELECTRICAL SPECIFICATIONS Note • Electrical characteristics at +25 °C unless otherwise specified Operating Temperature: -55 °C to +125 °C Aging Rate: 0 % maximum per decade Capacitance Range: 1.0 pF to 27 pF Insulation Resistance (IR): Voltage Rating: 50 VDC to 100 VDC at +25 °C and rated voltage 100 000 M minimum or 1000 F, whichever is less Temperature Coefficient of Capacitance (TCC): BP: 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C with zero (0) VDC applied Dissipation Factor (DF): BP: 0.05 % max. at 1.0 VRMS and 1 MHz Revision: 17-Aug-15 at +125 °C and rated voltage 10 000 M minimum or 100 F, whichever is less Dielectric Strength Test: performed per method 103 of EIA-198-2-E. Applied test voltages 250 VDC-rated: 200 % of rated voltage Document Number: 45070 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DSCC 05003 www.vishay.com Vishay Vitramon QUICK REFERENCE DATA DIELECTRIC CASE CODE BP CAPACITANCE MAXIMUM VOLTAGE (V) MINIMUM MAXIMUM 100 1.0 pF 27 pF 0402 ORDERING INFORMATION 05003- 1R0 B C Z - C (2) DSCC NUMBER CAPACITANCE NOMINAL CODE DC VOLTAGE RATING (1) CAPACITANCE TOLERANCE TERMINATION GROUP C TESTING OPTION 0402 Case size High Frequency Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. An “R” indicates a decimal point. Examples: 1R0 = 1.0 pF A = 50 V B = 100 V B = ± 0.1 pF C = ± 0.25 pF D = ± 0.50 pF F=±1% G=±2% J=±5% K = ± 10 % M = ± 20 % Note: B, C, D 6.2 pF B, C, J, K, M 6.8 pF to 9.1 pF F, G, J, K, M 10 pF M = silver palladium Z = Ni barrier with tin / lead plate min. 4 % lead C = full group C L = 2000 h life test only M = 1000 h life test only H = low voltage humidity test only - = group A test only PACKAGING C = 7" reel / paper tape O = 7" reel / flamed paper tape J = 7" reel (low quantity) P = 11 1/4" / 13" reel / paper tape I = 11 1/4" / 13" reel / flamed paper tape B = bulk Note: “I” and “O” is used for “M” termination code Notes (1) DC voltage rating should not be exceeded in application (2) Selecting one of the group C options with life testing may extend the delivery time DIMENSIONS in inches (millimeters) W L T MAX. P PART ORDERING NUMBER 05003- Revision: 17-Aug-15 TERMINATIONS PAD (P) LENGTH (L) WIDTH (W) MAXIMUM THICKNESS (T) MINIMUM MAXIMUM 0.040 ± 0.004 (1.00 ± 0.10) 0.020 ± 0.004 (0.50 ± 0.10) 0.024 (0.60) 0.004 (0.10) 0.016 (0.41) Document Number: 45070 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DSCC 05003 www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC BP STYLE 05003 CASE CODE 0402 VOLTAGE (VDC) VOLTAGE CODE 50 100 A B TOLERANCE CAP. CODE CAP. 1R0 1.0 pF •• •• B, C 1R1 1.1 pF •• •• B, C, D 1R2 1.2 pF •• •• B, C, D 1R3 1.3 pF •• •• B, C, D 1R5 1.5 pF •• •• B, C, D 1R6 1.6 pF •• •• B, C, D 1R7 1.7 pF •• •• B, C, D 1R8 1.8 pF •• •• B, C, D 2R0 2.0 pF •• •• B, C, D 2R1 2.1 pF •• •• B, C, D 2R2 2.2 pF •• •• B, C, D 2R4 2.4 pF •• •• B, C, D 2R7 2.7 pF •• •• B, C, D 3R0 3.0 pF •• •• B, C, D 3R3 3.3 pF •• •• B, C, D 3R6 3.6 pF •• •• B, C, D 3R9 3.9 pF •• •• B, C, D 4R3 4.3 pF •• •• B, C, D 4R7 4.7 pF •• •• B, C, D 5R1 5.1 pF •• •• B, C, D 5R6 5.6 pF •• •• B, C, D 6R2 6.2 pF •• •• B, C, D 6R8 6.8 pF •• •• B, C, J, K, M 7R5 7.5 pF •• •• B, C, J, K, M 8R2 8.2 pF •• •• B, C, J, K, M 9R1 9.1 pF •• •• B, C, J, K, M 100 10 pF •• •• F, G, J, K, M 110 11 pF •• •• F, G, J, K, M 120 12 pF •• •• F, G, J, K, M 130 13 pF •• •• F, G, J, K, M 150 15 pF •• •• F, G, J, K, M 180 18 pF •• •• 200 20 pF •• F, G, J, K, M 220 22 pF •• F, G, J, K, M 240 24 pF •• F, G, J, K, M 270 27 pF •• F, G, J, K, M F, G, J, K, M Notes RoHS-compliant except when supplied with lead (Pb)-containing termination, code “Z” •• Paper carrier tape Revision: 17-Aug-15 Document Number: 45070 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DSCC 05003 www.vishay.com Vishay Vitramon DSCC PACKAGING QUANTITIES (1) 7" REEL QUANTITIES CASE CODE TAPE SIZE 0402 8 mm 11 1/4" AND 13" REEL QUANTITIES BULK VIAL PACKAGING CODE “B” 100 PACKAGING CODE “C” / “O” PACKAGING CODE “J” PAPER TAPE PACKAGING CODE “P” / “I” 4000 1000 10 000 Note (1) Reference: EIA Standard RS 481 - “Taping of Surface Mount Components for Automatic Placement” STORAGE AND HANDLING CONDITIONS (1) Store the components at 5 °C to +40 °C ambient temperature and 70 % related humidity conditions. (2) The product is recommended to be used within a time-frame of 2 years after shipment. Check solderability in case extended shelf life beyond the expiry date is needed. Precautions: a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering. b. Store products on the shelf and avoid exposure to moisture or dust. c. Do not expose products to excessive shock, vibration, direct sunlight and so on. Revision: 17-Aug-15 Document Number: 45070 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000