EKV Datasheet

EKV
www.vishay.com
Vishay Roederstein
Aluminum Capacitors
Radial Style
FEATURES
• Polarized aluminum electrolytic capacitor
• High ripple current
• High load life up to 10 000 h
• Temperature range up to 105 °C
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• For electronic lighting ballast
• Power supply
QUICK REFERENCE DATA
DESCRIPTION
UNIT
VALUE
Nominal case size (Ø D x L)
mm
10 x 12.5 to 18 x 31.5
Rated capacitance range CR
μF
1.0 to 150
Capacitance tolerance
%
± 20
Rated voltage range
V
200 to 450
Category temperature range
°C
-25 to 105
Load life
h
10 000
Based on sectional specification
IEC 60384-4/EN130300
Climatic category IEC 60068
25/105/56
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
RATED VOLTAGE (V)
CR
(μF)
200
250
350
400
450
1.0



10 x 12.5
-
2.2



10 x 12.5
10 x 16
3.3


10 x 12.5

10 x 16
4.7



10 x 16
10 x 20
6.8

10 x 12.5

10 x 16
10 x 20
10
10 x 16


10 x 20
12.5 x 20
22
10 x 20

12.5 x 20
12.5 x 25
16 x 25
33

12.5 x 20
16 x 20
16 x 25
18 x 25
47
12.5 x 20
12.5 x 25
16 x 25
18 x 25
18 x 31.5
68
12.5 x 25
16 x 25
18 x 25
-
-
100
16 x 25
18 x 25
-
-
-
150
18 x 25
-
-
-
-
Revision: 25-Sep-13
Document Number: 25145
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
EKV
www.vishay.com
Vishay Roederstein
RADIAL STYLE: DIMENSIONS in millimeters
Ø D + α max.
Ø d ± 0.05 tinned copper-ply steel
+
S ± 0.5
L + β max.
15 min.
4 min.
ØD
5
6.3
8
10
12.5
16
18
22
25
S
2.0
2.5
3.5
5.0
5.0
7.5
7.5
10.0
12.5
Ød
0.5
0.5
0.6
0.6
0.6
0.8
0.8
1.0
1.0

1.5
2.0

0.5
1.0
Ød
DIMENSIONS in millimeters AND AVAILABLE FORMS
Dmax.
Dmax.
Casing Insulation
Lmax.
15 min.
S ± 0.5
Lmax.
4 min.
Ø D ≤ 18 long leads MALREKV00...
4.5 ± 0.5
Ø D ≤ 18 shortened leads MALREKV05...
(S = 2 mm/2.5 mm/3.5 mm/5 mm/7.5 mm)
GENERAL NOTE
• For Minimum Package Quantity (MPQ) and Minimum Order Quantity (MOQ) please refer to our price list or contact customer service.
• For other packaging forms please refer to Vishay Roederstein General Information.
ORDERING EXAMPLE
ELECTRICAL DATA
SYMBOL
UR
CR
DESCRIPTION
Rated voltage
Rated capacitance at 120 Hz
tan 
Max. dissipation factor at 120 Hz
RESR
Max. equivalent series resistance at 120 Hz
IR
EKV 22 μF/450 V, ± 20 %, size: 16 mm x 25 mm
Leads: Long 
Ordering code: MALREKV00JG222P00K
Leads: Short 
Ordering code: MALREKV05JG222P00K
Rated alternating current (RMS) at 120 Hz and
upper category temperature
Note
• Unless otherwise specified, all electrical values apply at
Tamb = 20 °C, P = 80 kPa to 120 kPa, RH = 45 % to 75 %.
Revision: 25-Sep-13
Document Number: 25145
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
EKV
www.vishay.com
Vishay Roederstein
ELECTRICAL DATA AND ORDERING INFORMATION
CR
120 Hz
(μF)
UR
(V)
200
250
350
400
450
DIMENSIONS
ØDxL
(mm)
tan 
120 Hz
RESR
120 Hz
()
IR
100 kHz/105 °C
(mA)
WEIGHT
(g)
CATALOG NUMBER
(Long Leads)
10
10 x 16
0.15
19.9
250
2.3
MALREKV00DD210S00K
22
10 x 20
0.15
9.04
500
2.8
MALREKV00DE222S00K
47
12.5 x 20
0.15
4.23
660
3.8
MALREKV00FE247S00K
68
12.5 x 25
0.15
2.93
760
5.1
MALREKV00FG268S00K
100
16 x 25
0.15
1.99
1120
7.1
MALREKV00JG310S00K
150
18 x 25
0.15
1.33
1360
9.5
MALREKV00KG315S00K
MALREKV00DC168N00K
6.8
10 x 12.5
0.15
29.3
120
1.9
33
12.5 x 20
0.15
6.03
600
3.8
MALREKV00FE233N00K
47
12.5 x 25
0.15
4.23
720
5.1
MALREKV00FG247N00K
68
16 x 25
0.15
2.93
920
7.1
MALREKV00JG268N00K
100
18 x 25
0.15
1.99
1200
9.5
MALREKV00KG310N00K
3.3
10 x 12.5
0.20
80.4
100
1.9
MALREKV00DC133O00K
22
12.5 x 20
0.20
12.1
350
3.8
MALREKV00FE222O00K
33
16 x 20
0.20
8.04
500
6.3
MALREKV00JE233O00K
47
16 x 25
0.20
5.64
660
7.1
MALREKV00JG247O00K
MALREKV00KG268O00K
68
18 x 25
0.20
3.90
840
9.5
1.0
10 x 12.5
0.24
318
90
1.9
MALREKV00DC110X00K
2.2
10 x 12.5
0.24
145
100
1.9
MALREKV00DC122X00K
4.7
10 x 16
0.24
67.7
180
2.3
MALREKV00DD147X00K
6.8
10 x 16
0.24
46.8
200
2.3
MALREKV00DD168X00K
10
10 x 20
0.20
26.5
280
2.8
MALREKV00DE210X00K
22
12.5 x 25
0.20
12.1
430
5.1
MALREKV00FG222X00K
33
16 x 25
0.20
8.04
640
7.1
MALREKV00JG233X00K
47
18 x 25
0.20
5.64
840
9.5
MALREKV00KG247X00K
2.2
10 x 16
0.24
145
120
2.3
MALREKV00DD122P00K
3.3
10 x 16
0.24
96.5
140
2.3
MALREKV00DD133P00K
4.7
10 x 20
0.24
67.7
180
2.8
MALREKV00DE147P00K
6.8
10 x 20
0.24
46.8
200
2.8
MALREKV00DE168P00K
10
12.5 x 20
0.20
26.5
320
3.8
MALREKV00FE210P00K
22
16 x 25
0.20
12.1
560
7.1
MALREKV00JG222P00K
33
18 x 25
0.20
8.04
700
9.5
MALREKV00KG233P00K
47
18 x 31.5
0.20
5.64
880
12.0
MALREKV00KS247P00K
LOW TEMPERATURE BEHAVIOUR (at 120 Hz)
IMPEDANCE RATIO
Z (T2)/Z (T1)
RATED VOLTAGE (V)
T2/T1
200
250
350
400
450
-25 °C/+20 °C
3
3
4
6
6
ADDITIONAL ELECTRICAL DATA
PARAMETER
CONDITIONS
VALUE
After 5 min at UR
IL5  0.02 x CR x UR + 25 μA
Calculated from tan max.
ESR = tan /2  f CR
Current
Leakage current
(test conditions: UR, 20 °C)
Resistance
Equivalent series resistance (ESR)
Revision: 25-Sep-13
Document Number: 25145
3
For technical questions, contact: [email protected].com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
EKV
www.vishay.com
Vishay Roederstein
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
IR MULTIPLIER
FREQUENCY
(Hz)
1.0 μF ~ 4.7 μF
6.8 μF ~ 150 μF
60
0.25
0.35
120
0.30
0.50
300
0.45
0.60
1000
0.60
0.80
10 000
0.80
0.90
 100 000
1.00
1.00
TEST PROCEDURES AND REQUIREMENTS
TEST
PROCEDURE
(quick reference)
REQUIREMENTS
Load life
Tamb = 105 °C
UR and IR applied
After 5000 h  6.8 μF
After 10 000 h  10 μF
C/C: ± 20 % of initial value
IL  spec. limit
tan   2 x spec. limit
Shelf life
No voltage applied
After 1000 h
After test: UR to be applied for 30 min
24 h to 48 h before measurement
C/C: ± 20 % of initial value
IL  spec.limit
tan   2 x spec. limit
Revision: 25-Sep-13
Document Number: 25145
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000