Wide Terminal Type High Wattage Chip Resistor Hokuriku Electric Industry Co.,Ltd [Model No.] WCR110/160 [Features] ■Surface mount type, 3W , 5W rated of high wattage type ■Primary circuit of power supply is suitable application. ■Due to wide side terminal structure, solder joints hold high reliability. ■Wide side terminal structure has effect of suppressing heat generation. ■1Ω~1MΩ, wide resistance range is covered. ■Europe RoHS compliant product. [Dimensions] (Unit:mm) L W Model No. L W t c d WCR110 11.00±0.20 5.00±0.20 0.56±0.15 0.60±0.20 1.50±0.20 WCR160 16.00±0.20 8.00±0.20 0.56±0.15 0.70±0.20 2.50±0.20 Rated power (W) Tolerance Range (Ω) TCR(ppm/℃) c t d [Specification] Model No. WCR110 3.0 W WCR160 5.0 W Max. Working voltage Max. Overload voltage 1~91 ±200 200V F(±1%) 100~9.1k ±100 10k~1M ±200 250V J(±5%) 1~1M ±200 *Specification in bold line is common to WCR110, WCR160. *Operating temperature range : -55~+155℃ [Structure] No. 1 2 3 4 5 6 7 8 9 10 Element Name Ceramic substrate Back electrode Top electrode Resistive element Protective coat Ⅰ Protective coat Ⅱ Marking Side electrode Ni plating Sn plating 3 7 4 6 8 9 1 10 2 * Design・specification are subject to change without prior notice. Please check before purchase and use. 2015.4.10 5 HOKURIKU 400V 500V Hokuriku Electric Industry Co.,Ltd [Power rating] ■For resistors operated in ambient temperature above 70 ℃,power rating must be derated in accordance with the derating curve. Derating Curve 100 Power rating (%) 80 60 40 20 0 -55 0 70 155 Ambient temperature (℃) 【Surface temperature】 ■Please refer below, for relation between rated power ratio and surface temperature rise. Condition: Condition: Measure by soldering to glassglass-fabric laminate epoxy resin (t= (t=1.6 t=1.6mm 1.6mm Cu foil 35μm 35μm) μm) WCR160 Temperature rise WCR110 5W (Center of resistor) 3W (Center of resistor) 1W (Center of resistor) 180 160 S urface tem p erature rise(℃) Surface tem p erature rise(℃) Temperature rise 200 200 Hollow dot: (Electrode of resistor) 140 120 100 80 60 40 20 3W 1W 180 160 (Center of resistor) (Center of resistor) Hollow dot: (Electrode of resistor) 140 120 100 80 60 40 20 0 10 20 Cu foil d=e 0 30 10 Unit (mm) 20 d=e Cu foil 30 Unit (mm) e ※ Please keep center temperature of the resistor not to exceed 155℃. d [Recommended footprint] b c WCR110 WCR160 a 2.5 3.5 b 2.0 3.2 c 11.0 16.0 b a (mm) a c * Design・specification are subject to change without prior notice. Please check before purchase and use. 2015.4.10 HOKURIKU Cu foil pattern dimension for measurement