Data Sheet Mechanical Drawing Apply a piece of shrinking tube for marking 10 +/- 2 Dot for pin 1 ICE Components, Inc. Tel 678-560-9172 Fax 678-560-9304 [email protected] www.icecomponents.com 1165 Allgood Rd., Ste. #20, Marietta, GA 30062 21.5 MAX 18.5 MAX 38.1 +/- 2 15.5 MAX TO09035 YYWW General Information Customer Part Number Revision Description Date Reference Doc Control # Issue(For ICE use only) TO09035 0 8W Flyback Transformer NOV-10-2010 OPP10769 1011-958P -Specification Pins Spec Item Inductance (HP-4284A) Leakage Inductance DCR 4–1 3.0 MIN unit:mm Sample Test Data Test Condition 20 uH max 100kHz, 1Vrms, series 3–2 0.3 Ohms max Fly1 – Fly2 0.2 Ohms max 4–1 1050 mV +/- 3 mV Voltage Ratio & Phasing 3–2 130 mV +/- 3 mV Test Fly1 – Fly2 200 mV +/- 3 mV (1,2,3,4) – (Fly1, Fly2) Hi – Pot Winding – Core 25 deg C 10 kHz, i/p: 3 – Fly2 = 1380 mV, short (2 – 4, 1 – Fly1) 3000 Vac, 60Hz, 1 mA, 1 minute 1500 Vac, 60Hz, 1 mA, 1 minute Remark Footprint Schematic 5 SQ 0.5 100kHz, 1Vrms, series 1.8 Ohms max 4 4 1 1.8 mH +/- 5% 4 – 1 short (2,3, Fly1, Fly2) 4–1 Fly1 Fly2 3.8 1 5 8 Fly1 1) This is RoHS compliant product. 4 3 15.4 Fly2 1 2 Sample approval is required before release to production. Sample specifications take precedence over customer specifications. 4 TOP VIEW Rev. 0 Description Initial release unit:mm PRD CHK Emily Joe APP Date NTFY L. L. Chou 2010/11/10 2010/11/0 __________________________ Customer Signature FORM NO. : I10105-01 PAGE 1 OF 1