Data Sheet Mechanical Drawing 10.6 MAX 4 ICE Components, Inc. Tel 678-560-9172 Fax 678-560-9304 [email protected] www.icecomponents.com 1165 Allgood Rd., Ste. #20, Marietta, GA 30062 1 IN06090 YYWW 3 8.7 MAX 2 General Information Item 6.0 MAX Customer Part Number Revision Description Date Reference Doc Control # Issue(For ICE use only) IN06090 0 Inductor AUG-07-2009 ---Specification Pins Spec (a) (b) 2.29 unit:mm Sample Test Data Test Condition Inductance @0Adc 1 – 3 600 nH +/- 15% Inductance @Isat at 1 – 3 25degC 1–3 430 nH min 1 MHz, 0.1Vrms, series (26Adc) 320 nH min 1 MHz, 0.1Vrms, series (32Adc) DCR 1 MHz, 0.1Vrms, series 1–2 0.63 mOhm +/- 10% 4–3 0.63 mOhm +/- 10% Footprint Schematic +25 deg C Recommended PCB Layout Remark 8.24 1 4 1. 2.0 1.6 2.55 1.45 2. 1.0 1.45 2.29 1.78 2 10.2 Top View unit:mm Sample approval is required before release to production. Sample specifications take precedence over customer specifications. 4.06 3. 4. 5.9 3 Rev. 0 1.45 2.55 2.03 Top View Description Initial release Isat is the current at which the inductance drops by 20%. Inductance vs. Current Curve as attached. This is RoHS compliant product. The nominal DCR is measured from point (a) to point (b), as shown on the mechanical drawing. unit:mm PRD CHK Emily Gary APP Date NTFY L. L. Chou 2009/8/7 2009/8/7 __________________________ Customer Signature FORM NO. : I10105-02 PAGE 1 OF 2 P/N: IN06090 Inductance VS Current Inductance(%) 100.0 80.0 60.0 40.0 20.0 0.0 0 4 8 12 16 20 24 28 32 36 Current (DC) PAGE 2 OF 2