G5520A/S

G5520A
Global Mixed-mode Technology
Bias Power Supply for TFT LCD Panels
Features
regulator with an integrated 20V N-Channel 0.7Ω
MOSFET that allows the use of ultra-small inductors
and ceramic capacitors. It provides fast transient response to pulsed loading while achieving efficiency
over 90%. The device can produce output voltage as
high as 18V from an input as low as 2.8V.
„
„
„
2.5V to 5.5V Input Supply Range
Active-High Enable Control
1.2MHz Current-Mode Boost Regulator
Š Fast Transient Response to Pulse Load
Š ±1% Accurate Output Voltage
Š Built-In 20V/1.8A, 0.7Ω N-Channel MOSFET
Š High Efficiency up to 90%
Š Over-Current Protection
Š Output Under-Voltage Protection
„ High-Performance Operational Amplifier
Š ±150mA Output Short-Circuit Current
Š 12V/μs Slew Rate
Š 12MHz, -3dB Bandwidth
Š Rail-to-Rail Input and Output
„ 600kHz Negative Charge Pump Driver for VGL
„ 600kHz Positive Charge Pump Driver for VGH
„ Power-On Sequence Control
„ Thermal-Overload Protection
„ TQFN3X3-16 Package
The VCOM buffer can drive the LCD VCOM voltage that
features high short-circuit current (150mA), fast slew
rate (12V/μs), wide bandwidth (12MHz) and rail-to-rail
input/output.
A positive and a negative charge-pump driver provide
adjustable regulated output voltages VGH and VGL to
bias the TFT. Both the charge-pump driver operate
with 600kHz switching frequency.
The G5520A includes internal power-up sequencing,
over/under voltage protections of the boost converter,
and over temperature protection to ensure in safe operating.
Applications
„
„
„
Photo Frame
GPS
UMPC
The G5520A are available in a 16-pin 3X3TQFN
packages.
General Description
Ordering Information
The G5520A includes a high-performance boost regulator, a VCOM buffer (unity gain OPA), a VGH charge
pump driver, and a VGL charge pump driver for active-matrix thin-film transistor (TFT) liquid-crystal displays (LCDs).
ORDER
NUMBER
MARKING
TEMP.
RANGE
PACKAGE
(Green)
G5520AR41U
5520A
-40°C to +85°C
TQFN3X3-16
Note: R4:TQFN3X3-16
1: Bonding Code
U: Tape & Reel
The boost converter provides the regulated supply
voltage for the panel source driver ICs. The converter
is a high switching frequency (1.2MHz) current mode
12
FB
11
IN
10
LX
FBN
DRVP
FBP
COMP
15
14
13
9
8
4
SUP
NC
7
3
OPAO
AGND
Thermal
Pad
6
2
OPAI
REF
5
1
EN
DRVN
16
Pin Configuration
PGND
G5520A TQFN3X3-16
Note: Recommend connecting the Thermal Pad to the Ground for excellent power dissipation.
TEL: 886-3-5788833
http://www.gmt.com.tw
Ver: 0.2
Oct 21, 2013
1