HCD5MIH 720P TDN H.264 NETWORK CAMERA ® Honeywell’s latest addition to the EQUIP Series of IP-based products, the HCD5MIH is a high definition, True Day/Night network camera that offers the latest in digital video surveillance. The HCD5MIH provides 720p resolution at full frame rate. The 1/4" CMOS network camera combines world-class imaging and camera technology with our EQUIP Series IP networking technology, to provide streaming H.264 and MJPEG images at up to 30 fps (25 fps for PAL systems). The HCD5MIH supports the PSIA specification for interoperability between network video products. The HCD5MIH day/night camera adapts to varying lighting conditions to ensure the highest picture quality even in extreme low light. When the light level drops too low for accurate video identification in colour, the camera moves the IR cut filter out of the optical path and then switches to black and white video to capture more detail using the increased sensitivity of the CMOS sensor to IR light. (lens sold separately) Setup is quick and easy and can be customised through a web client or from an NVR. The web client also allows fine tuning of the camera and auto iris levels. This can also be performed from most DVR/NVR setup utilities. The HCD5MIH supports dual video streams and multiple compression formats. The digital compression parameters for the two video streams are independently configurable. A third analogue stream can be utilised as backup or for local viewing. This is also valuable when retrofitting onto an existing analogue input DVR or encoder (full resolution not available). The HCD5MIH has built-in Power over Ethernet (IEEE 802.3af) Class 1, which allows power to be supplied to the camera using standard network cabling, eliminating the need for a separate power supply and associated wiring. In retrofit situations where PoE switching does not exist, the unit can also be powered directly from 24 VAC. Market Opportunities The HCD5MIH is a network surveillance solution designed for object recognition in locations where variable and low light conditions exist. This provides optimum performance for both indoor and outdoor applications. Features • Outstanding image quality, 720p (1280 x 720) resolution • 30 fps (25 fps PAL) progressive scan • Dual digital video streams simultaneously, independently configurable • H.264 and MJPEG compression • Remote firmware update • PSIA support • Supports both dynamic and static IP addresses • Camera tamper detection • Variable day/night threshold setting to accommodate switching to black and white images in low light • Includes advanced IP locator software to make system setup easy • Web server for remote setup of camera video and network parameters • Choice of 24 VAC or PoE IEEE 802.3af Class 1 power inputs • Multiple levels of password protected remote access prevents unauthorised users from altering system settings • Supports bidirectional audio HCD5MIH SPECIFICATIONS Like all cameras in the EQUIP IP Series, the HCD5MIH network camera uses Honeywell technology for video motion detection, tamper detection, remote firmware updating and for secure storage of all camera settings. Camera tamper detection notifies the user when a camera’s field of view is altered, blinded or blurred. This ensures the video’s integrity and alerts the customer to either a live event or a system problem that is causing disruption to the video stream. Honeywell’s technology also allows users to remotely upload firmware to the camera. Setup is quick and easy and can be customised through a web client or from an NVR or DVR. The built-in web server provides password protected access to the camera’s video and network setup. System Diagram Hybrid DVR Monitor NETWORK Analogue out NVR Keyboard EQUIP SERIES CAMERAS Monitor Monitor HCD5MIH SPECIFICATIONS Environmental Operational Temperature Operating: -10°C to 50°C Storage: -20°C to 60°C Relative Humidity 0% to 85%, non-condensing Video Standard NTSC, PAL Scanning System Progressive scan Image Sensor 1/4" CMOS Number of Pixels (H x V) 1280 x 720 Minimum Illumination 0.6 lux colour/0.4 lux BW @ 50 IRE, F1.3 0.25 lux colour/0.15 lux BW @ 30 IRE, F1.3 Automatic Lens Control DC Iris Level 1-25 Video Output (AUX) 1.0 Vp-p @ 75 Ohms S/N Ratio 50 dB or more (AGC off) Auto Gain Control Frame Rate NTSC/PAL Off/On, selectable (10-40 dB) Automatic Electronic Shutter Video Streaming 1/60-1/24,500 sec (NTSC) 1/50-1/24,500 sec (PAL) White Balance AWC, AWC Push, Manual IP Specifications Audio/Two-Way Line in/out Electrical Input Voltage 24 VAC, PoE IEEE 802.3af, Class 1 Input Range 17-28 VAC Surge Suppression 1.5 kW transient Power Consumption 5.0 W (max) 24 VAC 3.5 W (max) PoE Mechanical Video Compression Resolution 1280 x 720 800 x 450 640 x 360 320 x 180 Dual stream H.264 and MJPEG Bitrate H.264 (Typical)* 1.8 Mbps 1.2 Mbps 0.6 Mbps 0.21 Mbps Frame Rate 30/25 30/25 30/25 30/25 Storage/Day (GB) 18.98 12.65 6.33 0.89 Up to 30/25 fps video in all resolutions Dual streaming: Controllable frame rate and bandwidth Constant or variable bit rate Security Multiple user access levels with password protection Users 1 Administrator, 3 Guests Video Access Camera live view for 1 client. Full control of all from Web camera settings available to administrator Browser Minimum Pentium IV CPU 3.0 GHz or equivalent AMD, Web 512 MB RAM, AGP graphics card (32 MB RAM) Browsing Windows® XP 2000, Internet Explorer 6.0 or later Requirements Installation and Management Maintenance Honeywell IP Utility software identifies the IP address, checks status of device, firmware upgrades over HTTP Dimensions (W x H x D) See Diagram Supported Protocols HTTP, TCP, RTSP, RTP, UDP, ARP, DNS, RTCP, FTP, ICMP, DHCP, Bonjour, IGMP, Telnet Weight 0.5 kg camera only Standards PSIA support Construction Housing: Aluminium Finish: Cool Grey Powder Coat Regulatory Camera Mount 1/4-20 UNC mounting ring Connector Video Output: BNC connector Lens: 4 pin connector Power Input: Removable screw block Network: RJ45 connector Alarm I/O: Removable screw block Audio In: 3.5 mm mono phone jack Audio Out: 3.5 mm mono phone jack Emissions FCC, CE (EN55022) Immunity CE (EN55024) Safety EU: 2001/95/EC GPSD, UL 60950-1 *Actual bitrate is scene and motion dependent with H.264 stream. HCD5MIH SPECIFICATIONS System Integration Accessories Open IP Integration Housing and Mounts PSIA support and open API for real interoperability between Honeywell and other manufacturers’ IP-enabled security devices. Refer to the Honeywell Open Technology Alliance [http://www.honeywell.com/security/hota] to learn more about our open and integrated solutions. HBC5WT Wall/ceiling mount bracket Recommended Lens Options* HLD3V8MPD 3-8 mm High definition megapixel lens HLD45V13MPD 4.5-13.2 mm High definition megapixel lens NOTES: *Only a high definition megapixel lens should be used with the HCD5MIH camera. 135.6 mm 62.0 mm 62.0 mm 22.1 mm 20.6 mm Ordering HCD5MIH Network True Day/Night, 1/4" Progressive Scan, CMOS, 720p Resolution Camera, 24 VAC or PoE IEEE 802.3af Class 1, H.264, NTSC NOTE: Honeywell reserves the right, without notification, to make changes in product design or specifications. For additional information, please visit www.honeywell.com/security/me Honeywell Security Group LOB Building 08, Office 199 P.O.Box 18530, Jebel Ali Dubai United Arab Emirates (UAE) Tel: +971-4-8073200 www.honeywell.com HVS-HCD5MIH-01-ME(0311)DS-E March 2011 © 2011 Honeywell International Inc.