HD4MDIHX 720P TDN H.264 RUGGED INDOOR/OUTDOOR DOME NETWORK CAMERA ® Honeywell’s latest addition to the EQUIP Series of IP-based products, the HD4MDIHX is a high definition, True Day/Night rugged indoor/outdoor fixed mini-dome network camera. This ultra compact and vandal-resistant camera provides extremely crisp images at minimal bandwidth. The HD4MDIHX provides 720p resolution at full frame rate. Progressive scan technology and 2D edge enhancement provide outstanding clarity and definition. Digital Noise Reduction results in significant storage savings without sacrificing image quality in low light. The 1/4" progressive scan CMOS sensor offers the latest in digital video surveillance technology with accurate colour rendition through a wide variety of lighting conditions. The HD4MDIHX also supports the PSIA specification for interoperability between network video products. The HD4MDIHX integrates a camera and lens in a ultra compact, single piece, vandal-resistant unit for fast and easy installation in any application. The camera is designed to be surface mounted. Wall and pendant mount kits are also available. In addition to the low light colour performance, the camera will automatically switch to black and white. In this mode, lighting can be complemented with infrared for discreet/covert low light surveillance with exceptional monochrome images. A 3-D axis gimbal capable of 360º of pan, 180º of tilt and 360º of horizontal rotation simplifies mechanical camera adjustment. The Vari-focal Auto Iris lens allows the field of view to be adjusted to suit the scene requirements and an integrated analogue output is provided for the installer to connect a local test monitor while adjusting the scene. A powerful and intuitive web client allows fine tuning of the camera and the auto iris levels. This can also be performed from most DVR/NVR setup utilities. The HD4MDIHX supports dual video streams and multiple compression formats with rates up to 30 frames per second (25 fps for PAL systems). The digital compression parameters for the two video streams are independently configurable. A third analogue stream can be utilised as backup or for local viewing. This is also valuable when retrofitting onto an existing analogue input DVR or encoder (full resolution not available). With built-in low current Power over Ethernet (IEEE 802.3af), Class 1, power is supplied to the camera using standard network cabling, eliminating the need for a separate power supply and associated wiring. In retrofit situations where PoE switching does not exist, the unit can also be powered directly from 24 VAC. Market Opportunities The HD4MDIHX is perfect for installations where excellent picture clarity at minimal bandwidth is required. At three times the resolution of standard analogue cameras, yet with similar bandwidth requirements, the HD4MDIHX can be retrofitted on many existing DVR/NVR installations without requiring additional storage. Its discreet, vandal-resistant, outdoor design provides maximum protection against dust, dirt and water, and provides optimum performance for both indoor and outdoor applications. Features • Outstanding image quality, 720p (1280 x 720) resolution • Selectable compression formats • PSIA support • Web server for remote setup of camera video and network parameters • 30 fps (25 fps PAL) progressive scan • Dual digital video streams simultaneously, independently configurable • Choice of 24 VAC or PoE IEEE 802.3af Class 1 power inputs • Remote firmware update • Supports input and output alarm contacts • True Day/Night, 3.3-12 mm VFAI lens with removable IR cut filter • Camera tamper detection • Video motion detection • Supports both dynamic and static IP addresses • Wall and pendant mount kit available • Includes advanced IP locator software to make system setup easy • Supports bidirectional audio • Rugged polycarbonate dome HD4MDIHX SPECIFICATIONS Like all cameras in the EQUIP IP Series, the HD4MDIHX network camera uses Honeywell technology for video motion detection, tamper detection, remote firmware updating and for secure storage of all camera settings. Video motion detection recognises object motion within the field of view; then a simple on-screen notification alerts the user. Camera tamper detection notifies the user when a camera’s field of view is altered, blinded or blurred. This ensures the video’s integrity and alerts the customer to either a live event or a system problem that is causing disruption to the video stream. Honeywell’s technology also allows users to remotely upload firmware to the camera. Setup is quick and easy and can be customised through a web client or from an NVR or DVR. The built-in web server provides password protected access to the camera’s video and network setup. System Diagram Hybrid DVR Monitor NETWORK Analogue Out NVR Keyboard EQUIP SERIES CAMERAS Monitor Monitor HD4MDIHX SPECIFICATIONS Operational Environmental Video Standard NTSC, PAL Temperature Operating: -30°C to 60°C Storage: -20°C to 60°C Relative Humidity 0% to 85%, non-condensing Scanning System Progressive scan Image Sensor 1/4" CMOS Number of Pixels (H x V) 1280 x 720 Minimum Illumination 0.25 lux colour/0.22 lux BW @ 50 IRE, F1.6 0.11 lux colour/0.09 lux BW @ 30 IRE, F1.6 IP Specifications Automatic Lens DC Iris Level 1-25 Control Video Compression Resolution 1280 x 720 800 x 450 640 x 360 320 x 180 Video Output (AUX) 1.0 Vp-p @ 75 Ohms S/N Ratio 50 dB or more (AGC off) Auto Gain Control Frame Rate NTSC/PAL Off/On, selectable (10-40 dB) Automatic Electronic Shutter Video Streaming 1/60-1/24,500 sec (NTSC) 1/50-1/24,500 sec (PAL) Lens Type True Day/Night (TDN), 3.3-12 mm Vari-focal Auto Iris, F1.6 White Balance AWC, AWC Push, Manual Audio/Two-Way Line in/out Electrical Input Voltage 24 VAC, PoE IEEE 802.3af, Class 1 Input Range 17-28 VAC Surge Suppression 1.5 kW transient Power Consumption 3.5 W (max) Mechanical Dual stream H.264 and MJPEG Bitrate H.264 (Typical)* 1.8 Mbps 1.2 Mbps 0.6 Mbps 0.21 Mbps Frame Rate 30/25 30/25 30/25 30/25 Storage/Day (GB) 18.98 12.65 6.33 0.89 Up to 30/25 fps video in all resolutions Dual streaming: Controllable frame rate and bandwidth Constant or variable bit rate Security Multiple user access levels with password protection Users 1 Administrator, 3 Guests Video Access Camera live view for 1 client. Full control of all from Web camera settings available to administrator Browser Minimum Pentium IV CPU 3.0 GHz or equivalent AMD, Web 512 MB RAM, AGP graphics card (32 MB RAM) Browsing Windows® XP 2003, Internet Explorer 6.0 or later Requirements Installation and Management Maintenance Honeywell IP Utility software identifies the IP address, checks status of device, firmware upgrades over HTTP Supported Protocols HTTP, TCP, RTSP, RTP, UDP, ARP, DNS, RTCP, FTP, ICMP, DHCP, Bonjour, IGMP, Telnet Standards PSIA support Dimensions (W x H x D) See Diagram Regulatory Weight 1.3 kg camera only Emissions FCC, CE (EN55022) Housing: Die Cast Aluminium Finish: Cool Grey Powder Coat Dome: Polycarbonate Immunity CE (EN55024) Construction Safety EU: 2001/95/EC GPSD, UL 60950-1 Connector Video Output (AUX): 2-pin Molex connector Power Input: Removable screw block Network: RJ45 connector Alarm I/O: Removable screw block Audio In: Removable screw block Audio Out: Removable screw block *Actual bitrate is scene and motion dependent with H.264 stream. HD4MDIHX SPECIFICATIONS System Integration Accessories Open IP Integration Housing and Mounts PSIA support and open API for real interoperability between Honeywell and other manufacturer’s IP-enabled security devices. Refer to the Honeywell Open Technology Alliance [http://www.honeywell.com/security/hota] to learn more about our open and integrated solutions. HD4DIP-PK Pendant Mount Bracket HD4DIP-WK Wall Mount Bracket 52.0 mm 104.0 mm 117.5 mm 67.0 mm 46.0 mm 154.97 mm 90.0 mm Ordering HD4MDIHX Network True Day/Night Rugged Fixed Dome, 1/4" Progressive Scan, CMOS, 720p Resolution Camera, 3.3-12 mm VFAI, 24 VAC or PoE IEEE 802.3af Class 1, H.264, PAL NOTE: Honeywell reserves the right, without notification, to make changes in product design or specifications. For additional information, please visit www.honeywell.com/security/uk Honeywell Security Group Aston Fields Road Whitehouse Industrial Estate Runcorn Cheshire WA7 3DL Tel: 08448 000 235 www.honeywell.com HVS-HD4MDIH-01-UK(0311)DS-E March 2011 © 2011 Honeywell International Inc.