H-Series Green Class Net Meter ADVANCED KWH/DEMAND METER WITH CO2 FOOTPRINT PRODUCT DATA APPLICATION The Honeywell Green Class Net meter is a 3-Phase meter with communications. The device is used to monitor electric power usage of individual loads after the utility meter and store kW and kVAR data for automatic meter reading. The meter is dual protocol capable and provides both RS485 and Ethernet communications. FEATURES • Advanced 4-line display showing: - kWh delivered, received and Net kWh. - kW demand (with peak date & time). - Power factor per phase. - Real-time load in kW. - Amps per Phase. - Volts per phase. • CO2 footprint: provides estimated CO2 information based on total delivered energy and the energy that will be generated based on present load. • On-board set-up option for: - IP address. - Meter date/time. - ID codes for EZ7. • 0-2 volt output split-core current sensors allow for enhanced safety and accurate remote mounting of sensors up to 500 feet from meter without power interruption (all part numbers with ‘KIT’ include 3 current sensors). • Onboard installation diagnostics and verification system: current sensor installation diagnostics indicator, phase error indicator and phase angle diagnostics on display. • Optional 5th channel available for one external pulse meter input (gas, water, BTU, etc) on EZ-7 protocol. The channel provide interval data logging that can be read via E-mon Energy software. 63-2723-01 H-SERIES GREEN CLASS NET METER FEATURES CONTINUED • Non-volatile memory to maintain reading during power outages. • Communication options/protocols: - Built in RS-485: EZ-7. - Built in Ethernet: EZ-7. • MV-90 Compatible (with EZ7 only). • METER DATA POINTS - Energy delivered. - Reactive Energy delivered. - Energy Received. - Real Power. - Reactive Power. - Apparent power. - Power factor. - Current total. - Current average. - Voltage line. - Frequency. - Phase angle. - Real power for each phase. - Reactive power for each phase. - Apparent power for each phase. - Power factor for each phase. - Current for each phase. - Voltage for each phase. - Phase angle for each phase. - External input 1 (optional). • Compatible with E-Mon Energy software via EZ7 protocol for automatic meter reading, energy billing and profiling. • Phase loss alarm (N.O. Contact). • Built-in RS-485 communication capability supports the following connection configurations (or combinations not to exceed 52 devices per channel): - Up to 52 Class 500 meters and/or IDR interval data recorders. Cabling can be either daisy-chain or star configuration through RJ-11 modular jack (4-conductor) or terminal block (3-conductor), 18-26 AWG, up to 4,000 cable feet total. • For EZ-7 meters, records kWh and kVARh delivered, kWh and kVARh received in first four channels. Data stored in 15-min. for up to 72 days or 5-minute intervals for up to 24days. Maintains data in a first-in, first-out format. • UL/CUL Listed. Certified by independent test lab to ANSI C12.20 national accuracy standards. (+/- 0.2% from 1% to 100% of rated load). ORDERING INFORMATION When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the TRADELINE® Catalog or price sheets for complete ordering number. If you have additional questions, need further information, or would like to comment on our products or services, please write or phone: 1. Your local Honeywell Environmental and Combustion Controls Sales Office (check white pages of your phone directory). 2. Honeywell Customer Care 1885 Douglas Drive North Minneapolis, Minnesota 55422-4386 3. http://customer.honeywell.com or http://customer.honeywell.ca International Sales and Service Offices in all principal cities of the world. Manufacturing in Belgium, Canada, China, Czech Republic, Germany, Hungary, Italy, Mexico, Netherlands, United Kingdom, and United States. 63-2723—01 2 H-SERIES GREEN CLASS NET METER METER TECHNICAL SPECIFICATIONS Input Voltage Configuration 3-wire (Delta) Or 4-wire (Wye) Mains Voltage Input Up To 600 VAC RMS Available Input Power 12 VA Maximum Rating Current Sensor Rating Up To 3200 Amps RMS AC Available Power Factor 0.5 Leading Or Lagging Line Frequency 50-60 Hz Metering Accuracy All meter/current sensor amperages are accurate to ANSI C12.20 standards at +- 0.2% from 1% to 100% of current rating Voltage Operating Range +/-10% Of Rated Load Temperature Range -20 C To +50 C Relative Humidity Range 0-95% Non-condensing Altitude 2000 Meters Maximum Voltage Overload +25% Continuously: +100% For 20 Cycles Current Sensor Overload 100% For 1 Minute Without Damaging Meter Pollution Degree Degree 2 In Accordance With IEC 664 Installation (Overvoltage) Category Category 111 Measurement Category Category 111 Enclosure Type Green heavy duty JIC steel enclosure with padlocking hasp and mounting flanges for indoor installation Display Readout 4 Line LCD Standard Ranges 4-Wire Wye, 208 VAC: 100, 200, 400, 800,1600,3200 Amp 3-Wire Delta, 480 VAC: 100, 200,400,800,1600,3200 Amp 4-Wire Wye, 208 VAC: 100, 200, 400, 800,1600,3200 Amp 4-Wire Wye, 600 VAC: 100, 200, 400, 800,1600,3200 Amp RS-485 Serial Communications Cable: UL-listed/rated Telephone Cord. 4-cond. Input/output Voltage: Ground-isolated +/-5.4VDC Cable Connector: Screw Terminal Termination Recommended In-line Fuse Battery Cell Circuit Input Isolation: 5.3kVAC Max Cable Distance: 4000 Feet Max Network Nodes: 64 Cabling Nodes (Including Master) Default Baud Rate: 9600 for EZ-7 Manufacturer: Littlefuse Mfg. Part No: KLDR.100 Rating: 100mA, Time-delay, 600VAC Cartridge Fuse Description: Non-rechargeable Cell Used For Memory Retention Manufacturer: Panasonic Mfg Part No: CR2032 Working Voltage: 3 VDC Current Capacity 225 mAHr Electrolyte: Manganese Dioxide Lithium 3 63-2723—01 H-SERIES GREEN CLASS NET METER Current Voltage Class Series Green Net 3 Phase Meter Selection Guide Enclosure Type H 50 - 208 100- - 480 200- - 600 400- J JIC STEEL Protocol 01 EZ-7 RS 485, EZ-7 ETHERNET (GREEN NET METERS ONLY) Green Net Option -N- GREEN NET CLASS Current Sensors Included KIT 3 SPLIT CORE SENSORS 800- 1600 3200 Example H50-4803200J01-N-KIT = green class net, 480V, 3200A, JIC steel enclosure, RS-485 EZ-7 and Ethernet EZ-7, with 3 sensors included Automation and Control Solutions Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 customer.honeywell.com ® U.S. Registered Trademark © 2012 Honeywell International Inc. 63-2723—01 JPG Rev. 02-12 Printed in United States