ASFP and ASFLP

5Vdc or 3.3Vdc • MINIATURE CERAMIC SURFACE MOUNT • HCMOS OR TTL
PROGRAMMABLE CLOCK OSCILLATORS
ASFP and ASFLP
FEATURES:
5.0 x 3.2 x 1.6 mm
• Wide range of frequency up to 133MHz using PLL technology. • Reflow soldering.
• Quick delivery within one to five days for small quantities.
• Tristate E/ D or Stand-By function.
• Ultra miniature low profile SMD 5.0x3.2x1.6mm package.
• Hermetically seam welded.
APPLICATIONS:
• Clocks for a wide range of applications.
0.2+.0088/-0.004
(5.0+0.2/-0.1)
STANDARD SPECIFICATIONS
PARAMETERS
Frequency Range
AS FP
(Fo)
4
AS FPT
1.00MHz - 133MHz
ASFLP
VIH: 2.0V min.
Oscillation
VIL: 0.8V max. Hi Impedance
Disable current OE
(IDIS)
Stand-By current (option B)(I STB)
Jitter
RMS One sigma
0.11±.004
(2.85±0.1)
0.063max.
(1.6)
0.18±.004
(4.55±0.1)
0.008
(0.2)
0.1±.004
(2.5±0.1)
0.04±.006
(1.0±0.15)
VIH: 0.2*VDDmax.
15mA max.
20µA max.
±250ps max. for F< 40MHz, ±90ps typ.
±100ps max. for F> 40MHz, ±50ps typ.
±250ps max. for
F< 40MHz, ±90ps typ.
±100ps max. for
F> 40MHz, ±50ps typ.
±50ps max. for F< 40MHz, ±25ps typ.
±30ps max. for F> 40MHz, ±15ps typ.
±50ps max. for
F< 40MHz, ±25ps typ.
±40ps max. for
F>40MHz, ±20ps typ.
* Pin 1 has internal pull-up resistor which allow Pin 1 to be left floating ( enable high).
Connect a By-Pass capacitor 0.01 µ F between Vdd and GND.
Environmental and mechanical specifications see appendix C. Group 2.
Test circuit, waveforms,see appendix B. Reflow profile, see appendix E.
Tape and Reel, see appendix H.(1,000 pcs./reel).
Marking, see appendix G. Application notes, see appendix A.
2
1
0.028
(0.7)
VIH: 0.7*VDDmin.
30mA max.
50µA max.
Peak to peak
0.13±.004
(3.2±0.1)
1.00MHz - 106.25MHz
Operating Temperature (TOPR)
-20°C to +70°C ( See Options)
Storage Temperature
(TSTO )
-55°C to +125°C
Frequency Stability
(∆F/ Fo)
±50ppm max. ( See Options )
Supply Voltage
(Vdd)
5.0Vdc ±10%
3.3Vdc ±10%
Input Current
(I dd)
45mA max.
25mA max.
Duty Cycle or Symmetry
45/55% max.at 1/2 VDD 45 / 55% max.at 1.4 VDC 45/55% max.at 1/2 VDD
Rise and Fall Times (TR / TF )
4ns max.
Output Load
50pFmax.(F <66MHz)
5TTL
30pFmax.(F <40MHz)
25pFmax.(F <66MHz)
15pFmax.(F <40MHz)
Output Voltage
(VOH)
0.9 *Vdd min.
2.4V min.
0.7 *Vdd min.
(VOL)
0.4V max.
0.4V max.
0.2 *Vdd max.
Start-up Time
(TOSC)
10ms max.
Tristate (OE) Function
3
Pin
Function
1
2
3
4
OE or PD
GND
Output
Vdd
0.047±.006
(1.2±0.15)
0.03±.004
(0.8±0.1)
Recommended land pattern
0.063
(1.6)
ORDERING OPTIONS
0.10
(2.5)
ASFXPX - Frequency - Temperature - Overall Frequency Stability - Stand By - Packaging
Blank
or L
XXX.XXX MHz
T or Blank
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
-F for -30°C to +70°C
-N for -30°C to +85°C
-L for -40°C to +85°C
-J for + 20pmm max.* -B T for Tape and Reel
Dimensions: Inches (mm)
-R for + 25pmm max.*
-K for + 30pmm max.
* Standard temperature only.
Please call us for other tighter spec.
-H for + 35pmm max.
NOTE: Left blank if standard • All specifications and markings subject to change without notice
ABRACON
29 Journey • Aliso Viejo, CA 92656 • USA
(949) 448-7070 • F AX : (949) 448-8484
E-MAIL: [email protected] abracon.com • INTERNET A DDRESS : www.abracon.com
CORPORATION
®